• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2748-2756
• /
• 2000

IMT-2000 시스템(International Mobile Telecommunications-2000 system)은 음성, 화상, 및 데이터 서비스등 멀티미디어 서비스 제공을 목표로 기존의 디지털 이동통신 시스템에 적용된 기본 기술에 새로운 시스템 개념과 각종 응용기술 및 망 기술이 접목된 차세대 이동통신 시스템이다. 본 논문에서는 동기방식의 IMT-2000 시스템의 핵심 시스템인 제어국(BSC : Base Station Controller)의 무선 트래픽 및 신호접속기능, 이동호 제어기능 및 운용보전기능의 설계 및 구현에 대하여 논하고자 한다. 또한, IMT-2000 시스템의 호처리 절차 및 핸드오프 처리절차를 제시한다. 주로 BSC의 서브시스템인 AIS(ATM Interconnection Subsystem), BIS(BTS Interface Subsystem), SDS(Selector Distribution Subsystem), CSS(Control & Signal Subsystem) 및 BEMS(Base station Element Management Subsystem)의 구조와 기능, 그리고 MS(Mobile Station),BTS(Base Station Transceiver Subsystem), BSC 및 MSC(Mobile Switching Center)간의 호처리 기능, 절차(핸드오프 기능 포함)를 설계, 구현하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1253-1261
• /
• 1996

The base station (BS) of CDMA mobile system (CMS) provides mobile call services by controlling call processing functions. The call Processing part of the BS is divided into two components; the base station transceiver subsystem (BTS) and the base station controller (BSC). In this paper, we present the call capacity estimation of the BS about control signals and traffic data of calls by the simulation, and find the bottleneck points and problems which may occur in the BS. In order to estimate the call capacity, first we extract the major parameters for the modeling the BS. Second, we suggest the simulation model for the BS. Third, we estimate the simulation results by finding major objective factors such that the call blocking probability, the utilization ratio and the delay time in the traffic channel elements (TCEs), the BTS interconnection network (BIN)-COMA interconnection network (CIN) trunks, the transcoding channels and the CIN packet router.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1348-1358
• /
• 2000

The paper contributes to a traffic analysis for the CDMA cellular base station with repeater which are operated in a cell site. Usually the repeaters' traffic of the CDMA cellular system hardly could be separated from that of the base station because the links of the repeaters are divided from RF circuits of the base station. The paper introduces a traffic measuring method that separates the traffic of repeaters from that of the base station using time delay device. To get general results we use a single BTS(Base station Transceiver Subsystem) with three repeater as well as a single BTS with a single repeater. Then we proved that the traffic of the repeaters could separate from that of the base station clearly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.333-341
• /
• 2002

This article is written to make a foundation for effective radio network engineering by enabling the accurate traffic assumption between Base Station (BTS : Base Station Transceiver Subsystem) md Repeater through the scientific and systematic analysis of mobile traffic dealt within CDMA Base Station. Among these, Repeater, having direct physical connection with BTS, simply does the remote relay function but the volume of the traffic flowed into the repeater is not accountable. The total BTS traffic is the sum of traffic dealt by the BTS and multiple Repeaters. In this article, we tried traffic analysis of this kind by adopting RTD (Round Trip Delay) which is specially designed to measure distribution of the distance between the Base Station and the Mobile station by differentiating the traffic dealt by BTS from traffic dealt by Repeaters. The fact that the connection between mobile station and BTS via Repeater (which is located remotely) yields far more delay than the direct connection between mobile station and BTS is the clue of this article. Based on this fact, Time Delay equipment was put at the receiving side of the Repeater to add certain amount of delay to the traffic to BTS and the result showed that the 99.78% of the traffic can be identified.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.216-219
• /
• 1998

이 논문에서는 IMT-2000(International Moblie Telecommunication-2000)시스템에서의 멀티미디어 트래픽을 전송하기 위한 핸드오프 처리절차를 제안하였다. 이 절차에는 기본 코드채널(Fundamental Code Channel)과 부가 채널(Supplemental Code Channel)을 제어하기 위한 핸드오프관련 메시지들이 포함되었다. 부가 채널코들를 사용하기 위한 협상은 전송되는 트래픽의 크기에 따라 핸드오프 초기화 동안 수행된다. 그리고 MS(Moblie Station), BTS(Base Station transceiver Subsystem) 및 BSC(Base Station Controller)사이에서의 핸드오프 처리를 위한 호 흐름도와 상태천이도 (State Transition Diagram)도 설계하였다.

• IE interfaces
• /
• v.13 no.2
• /
• pp.178-187
• /
• 2000

In this paper, we investigate the system performance when the voice traffic is constructed as the ATM Adaptation Layer type 2(AAL-2) and then it is transmitted to the Base Station Controller(BSC) from the Base Station Transceiver Subsystem(BTS) through El link in International Mobile Telecommunication-2000 (IMT-2000) network. For this purpose, we first briefly describe the architecture of the BTS and the BSC, and then model it as a queueing network. By simulation study, we present the required processing time at traffic control blocks and the timeout time which should be set for multiplexing the user packets in the LIU(Line Interface Unit). Further, we evaluate the performance of physical links and the timeout probability that user packets can not be multiplexed within the established timeout time, and the multiplexing gain. Finally, we present the number of voice users who can be simultaneously admitted on one El link and 99.9% value of the transmission delay from the Radio Channel Element(RCE) to the Selector & Transcoder Subsystem(STS).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.660-667
• /
• 2000

This paper aims at analyzing the traffic of CDMA base station. RTD(Round Trip Delay) method, used for the study, is one of the developed tool for calculating the call setup time between the BTS(Base Station TransceiverSubsystem) and mobile station.We compare the calculated call setup time in air with the field experiments.And we suggest the RTD method for dividing the traffic of the connected repeater from that of the BTS, andwe can testify it by the experiment which analyze the difference of the received time between the base stationand the repeater including the forced delay elements.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.211-214
• /
• 2007

Development of IT and electronics industries has make our life more convenient, yet at the cost of radio communication noise, malfunctioning of electronic appliance and risks against human health all resulting from EMI. Many states are tightening their EMI (Electro Magnetic Interference) regulations around the world and the EMI regulatory measures are likely to increase in terms of targets and types. Against this backdrop, this paper aims to introduce fundamental and adequate EMI countermeasures encompassing product production cycle from design to production stage.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.115-118
• /
• 1998

ATM(Asynchronous Transfer Mode)을 기반으로한 BSC(Base Station Controller)를 이용한 무선 이동통신망에서는 크게 MSC, BSC, BTS로 구성 되어진다. BSC는 MSC(Mobile Switch Center)와의 STM-1급 (155.52Mbps) 정합이 이루어지며, 여러 BTS(Base Transceiver Subsystem)와 T1(1.544Mbps)/E1(2.048Mbps)급 정합이 이루어져 호연결, 관리, 제어 및 MT(Mobile Terminal)의 soft-handoff를 담당한다. BSC내의 저속 가입자 I/F에서는 BTS와 BSC내의 ATM switch와의 정합을 수행하면서 VPI/VCI변환, BSC 내부 cell format으로 변환, 그리고 UPC(Usage Parameter Control)등이 이루어진다. 본 논문에서는 ATM switch를 이용한 BSC 내부의 저속 가입자 I/F의 구현에 관해서 살펴본다.