• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.535-542
• /
• 1998

Cotton fabrics were treated with BTCA, which is used to improve the wrinkle recovery property of cotton fabrics. BTCA, with varying its concentrations, was treated on cotton fabrics by pad dry-cure technique. BTCA contents in treated cotton fabrics were determined by the weight gain and the FT-lR spectrometer. The effects on the sorption and physical properties of BTCA treated fabrics were investigated. IR spectra showed that ester-crosslinks were produced in BTCA treated cotton fabrics. And as increasing the concentration of BTCA, ester-crosslinks are increased in amorphous regions of fabrics. Moisture regain and water imbibition of treated fabrics were reduced. But, they were increased over a certain concentration. Dye sorptions also were reduced, but they were similar over 6% BTCA. When BTCA was treated on cotton fabrics, DP rating and wrinkle recovery angle were improved. On the other hand, strength retentions of treated fabrics were lower than untreated fabrics. Stiffness was increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.7
• /
• pp.1078-1084
• /
• 2002

Cotton fabrics were treated with 1,2,3,4-butanetetracarboxylic acid(BTCA) to impart durable press performance, which is formaldehyde-free DP finishing reagent. The pore structures of BTCA treated cottons were compared using a reverse gel permeation chromatographic technique(reverse GPC). A series consisting 4 kinds of water soluble sugars was used to study the elution characteristics of columns prepared from cotton fibers. From these data, differences in pore size distribution in the control and BTCA treated cottons were distinguished. BTCA crosslinks cellulose molecules provided wrinkle resistance to the treated cotton fabrics through ester linkages. Although crosslinking of cotton with BTCA reduced accessible internal volume across the entire range of pore size, differences in line pores were larger than in small pores. BTCA treated cotton exhibited reductions over 40% in large pore sizes.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.1051-1057
• /
• 2008

Safflower red and Amur Cork Tree dyes have used for dyeing on cotton fabrics largely. But they have low degree of lightfastness, So this study investigated the effect of BTCA pre-treatment on lightfastness of cotton fabrics dyed with Safflower red and Amur Cork Tree. The result is as the following; By FT-IR spectra, crosslingking was proved in cotton fabric pre treated with BTCA. K/S value of Safflower red dyed cotton fabric pretreated with BTCA was much more decreased than untreated cotton fabric with BTCA. It showed that the hue of the Safflower red dyed cotton fabric changed from reddish purple to red. However, K/S value of Amur Cork Tree dyed cotton fabric pre treated with BTCA was much more increased than untreated cotton fabric with BTCA. It showed that the hue of the Amur Cork Tree dyed cotton fabric changed from green yellow to yellow. For K/S value of Combination dyed cotton fabric pre treated with BTCA, Safflower red color was much more decreased than untreated cotton fabric. But Amur Cork Tree color was much more increased than untreated cotton fabric. It changed from reddish purple, red, yellowe red, to yellow in hue. ${{\Delta}E^*}_{ab}$ of Combination dyed cotton fabric in 40 hours irradiation was 15.7, however ${{\Delta}E^*}_{ab}$ of Combination dyed cotton fabric treated with 2% BTCA was 8.0, and that treated with 3% BTCA was 9.8. So, pre-treatment with BTCA to combination dyed cotton fabric with Safflower red and Amur Cork Tree showed more effective improvement of Lightfastness than untreated cotton fabric with BTCA.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1300-1306
• /
• 2003

Cotton fibers were treated, with 1, 2, 3, 4-butanetetracarboxylic acid (BTCA) which is formaldehyde-free reagent to impart durable press performance. The dyeability, dyeing rate, and diffusion coefficient, of BTCA treated cottons were compared to prove the changes of pore size structure using direct dyes and disperse dyes. Diffusion coefficients of BTCA treated cotton fibers were determined at acidic conditions to figure out the effect of swelling. Since the dyeability of BTCA treated cotton fibers dyed with direct dyes were reduced, it is considered that the dyeability to direct dyes is related to the quantity of residual large pores. But, the dyeability to disperse dyes were increased due to the less reduction of small pore sizes and the increase of hydrophobicity in BTCA treated cotton cellulose. The dyeability to direct dye and disperse dye were decreased more at acidic conditions than at neutral conditions. It seemed that the swelling of pores in the fiber were inhibited.

• Textile Coloration and Finishing
• /
• v.14 no.3
• /
• pp.19-25
• /
• 2002

Silk/cotton fabrics were treated with butanetetracarboxylic acid(BTCA) under various treating conditions such as concentration, treated time and curing temperatures. Bending property, tensile strength, wrinkle recovery angle, and shrinkage were measured. The BTCA concentration in the saponfication mixture was measured by an isocratic HPLC equipped with the strong cationic exchange column Aminex HPX-87-H and a UV detector. The detected concentration of BTCA was shown in silk side much more than that of cotton side. The bending and shrinkage properties were improved at minimum curing condition and the lower concentration of BTCA. Tensile strength decreased with increasing concentration of BTCA, curing temperature and treated time, while wrinkle recovery angle increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.819-827
• /
• 2000

The purpose of this study is to produce cotton fabric having improved dyeability and colorfastness as well as retaining the desirable durable press property. When cotton fabric was treated with additives, nitrogen content was increased as the additive concentration was increased. DP ratings and wrinkle recovery properties of BTCA treated cotton fabrics were greatly increased. But DP rating was lowered slightly by adding additives and wrinkle recovery property was decreased with the increase of additive concentration. Tensile strength was decreased by BTCA treatment but increased as additive concentration was increased. Various BTCA/additive treatments produced great affinity for reactive and acid dyes when dyebaths were adjusted at pH 3. It was showed that dyeability was increased as additive concentration was increased. The most effective additive for improving the dyeing properties of the crosslinked cotton was TEAㆍHCl. In case of reactive dye, there was almost no improvement on the dyeability of finished cotton by adding salt. Color fastness to washing and light of finished and dyed cotton were low except for the washfastness of reactive dye. Dyeing the BTCA/additive treated cotton fabrics with reactive dye had no effect on the physical properties.

• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2002

Silk/Cotton fabrics were treated with butanetetracarboxylic acid(BTCA) to improve crease recovery and anti-shrinking properties at various curing temperatures and pH values. We investigated the effects of finishing conditions on add-on of BTCA, bending property(E, 2HB), wrinkle recovery angle, shrinkage, and dyeing properties. The Add-on of BTCA increased with increasing curing temperature and concentration. Crease recovery was improved with decreasing shrinkage. Maximum add-on of BTCA was showed at pH 2.5. In case of dyeing and mercerization, silk side treated with BTCA was more flexible than untreated, whereas cotton side was more stiff. In dyeing after mercerization, B and 2HB values were higher and K/S values were doubled nearly. The hand of fabric improved with decreasing B and 2HB by the BTCA treatment. BTCA treatment after reactive dyeing improved crease recovery, and caused no change of color difference. However, BTCA treatment after reactive dyeing didn't improve crease recovery, whereas B and 2HB were decreased considerably by the treatment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.7
• /
• pp.987-994
• /
• 2000

Cotton fabrics were finished with mixture of BTCA and silicone by pad-dry-cure process to achieve better mechanical properties than those of finished with BTCA alone. The changes of mechanical properties o( finished cotton fabrics were measured with by the KES-FB System and the hand values were calculated from the data of mechanical properties. With the durable press finish with BTCA tensile, bending, shear and compression properties increased. In hand values, Stiffness Crispness and Anti-Drape Stiffness increased, and Fullness & Softness decreased. Whereas silicone treatment reduced bending and shear properties and improved tensile and compressional resilience. Thus, Stiffness Crispness and Anti-Drape Stiffness decreased, and Fullness & Softness increased. These results indicated that BTCA treatment restricts fiber/yarn mobility in the fabric structure due to crosslinking, but silicone treatment reduces inter-fiber and inter-yarn frictional forces. Therefore, finish with mixture of BTCA and silicone provided cotton fabrics with a lower Stiffness, Crispness and Anti-Drape Stiffness and a higher Fullness & Softnesss than finish with BTCA alone.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.525-534
• /
• 1998

Cotton fabrics were finished with mixture of BTCA(1,2,3,4,-butanetetracarboxylic acid) and polyalkyleneoxide-modified amino-functional silicone by pad-dry-cure process to achieve better DP performance with a higher retention of physical properties as compared to those of finished with BTCA alone. The results indicated that BTCA improved the wrinkle recovery but reduced significantly the tensile and tear strength of the treated fabrics. Whereas silicone imparted a lower wrinkle recovery, a lower loss of tensile strength than BTCA, in addition improved considerably the tear strength owing to reduction in inter-fiber and/or inter-yarn frictional forces. The concentration and curing temperature needed to enhance physical properties were as follows; for BTCA treatments 6%, at 18$0^{\circ}C$, for silicone treatments 1% at 14$0^{\circ}C$. This optimum concentration of silicone was observed by using the mixture of BTCA and silicone. The wrinkle recovery and DP rating of cotton fabrics treated with mixture of 4% BTCA and 1% silicone at a curing temperature of 17$0^{\circ}C$ was similar to those of treated with 6% BTCA at a curing temperature of 18$0^{\circ}C$, and other performance properties observed were; an increase in tensile strength, extension, toughness, abrasion resistance and moisture regain due to the reduction of BTCA concentration and curing temperature, futhermore an improvement in bending and surface properties due to the lubricating effect of silicone. On the other hand 1% aqueous silicone solution showed the lowest surface tension. Such nonionic surface activity resulted in a more uniform and rapid deposition of BTCA on the fiber or fabric.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.17-23
• /
• 2003

Fourier transform infrared spectroscopy(FT-IR) was used to characterize the intermolecular ester crosslinkages in cotton cellulose. The FT-IR data show that the band of the ester carbonyl group can be separated from overlapping carboxyl/carbonyl band by converting carboxyl group to carboxylate. When esterification occurs between a polycarboxylic acid and cotton cellulose, the carbonyl groups retained in the cotton exist in three forms; ester, carboxyl, and carboxylate anion. The FT-IR data were also correlated to the durable press rating result obtained. The appearance of BTCA-finished durable press silk/cotton fabrics were improved.