• Title/Summary/Keyword: BPS

Search Result 374, Processing Time 0.024 seconds

Development of Radio Frequency Identification System by Electromagnetic Induction (전자유도방식에 의한 무선인식시스템 구현)

  • 김경일;박영하;김관호;이영철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.3
    • /
    • pp.232-242
    • /
    • 1997
  • In this paper, we have designed an active radio frequency identification system solving the problems of moving transponder which is identification range expanding and low battery consuming of transponder. Developed radio frequency identification system is a bidirectional data transmission system which is composed of decoder data transmission of 120 kHz and transponder data carrier of 60 kHz which is a subharmonic frequency response with ASK modulation. The experimental results, designed system operating at 9600 bps, show good performances with detecting the 40 km/h moving transponder up to the range of 2 and 15 ${mu}A$ low consuming current.

  • PDF

Design and Performance Evaluation of Signal Processing for OFDM Underwater Acoustic Communications (OFDM 수중음향통신 신호처리 설계와 성능평가)

  • Kim Byung-Chul;Lu I-Tai
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.487-490
    • /
    • 2004
  • OFDM(Orthogonal Frequency Division Multiplexing) 방식의 수중음향 데이터 통신시스템에서 도플러 편이(Doppler Shift)와 도플러 확산(Doppler Spread)의 영향을 완화하여 주파수 효율을 향상시킬 수 있는 수신신호처리 방안을 설계하고 해상에서 송수신 된 시험 데이터의 BER 로써 성능을 평가한다. 도플러 편이를 OFDM 심볼에 부가된 Cyclic Prefix 와 상관계수법을 통해 추정하였으며 도플러 확산에 의해 시간에 따라 변화하는 채널을 Time-Frequency 축상에서 $2\times1D$ MMSE 방식으로 추정한다. 해상실험 결과, $8kHz\~11kHz$ 의 전송대역을 사용 할 때 복호 전 전송률 3098bps, 송수신 소자간 거리 7km, SNR 15dB에서 약 $1\~3\%$의 BER이 추정된다.

  • PDF

Ambient Light Backscatter Communication for IoT Applications

  • Yun, Jisu;Jang, Byung-Jun
    • Journal of electromagnetic engineering and science
    • /
    • v.16 no.4
    • /
    • pp.214-218
    • /
    • 2016
  • In this paper, we present an ambient light backscatter communication design that enables Internet of Things (IoT) devices to communicate through the backscattering ambient light emitted from lighting infrastructure or sunlight. The device can selectively modulate ambient light by switching a liquid crystal display (LCD) shutter located on its surface, so that a nearby smart device, which includes a photodiode or a camera, can demodulate this backscattered light information. To verify the practicality of the proposed concept, we design an IoT device equipped with a commercial LCD shutter and a microcontroller. Our device produces ambient light backscattered data at a speed of 100 bps, and these data are successfully decoded by a commercial photodiode module 10 cm away from the IoT device. We believe that our ambient light backscatter communication design is appropriate for implementation in various IoT applications.

A study on the Implementation of Automatic Devision DeviceFor CATV Network. (CATV 망을 위한 자동 분배기의 구현)

  • 조경원;곽윤식;박동희
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2003.05a
    • /
    • pp.187-191
    • /
    • 2003
  • This paper pertains to the embodiment of the CATV network devices, and Automatically Centralized device was embodied in order to solve the inefficiency of the existing passive device. The frequency bandwidth, which don't use the part of CATV on signal of video, using frequency bandwidth of the control and systemize in automatic distributive system, the communication which depends on two way of forward/backward communication and backward communication/materialize in the system of unification management of 9600bps using RS-232.

  • PDF

A Study on the Implementation of Automatic Device for CATV Network (CATV망을 위한 자동화 장치구현 사례 연구)

  • 곽윤식
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.7 no.4
    • /
    • pp.623-629
    • /
    • 2003
  • This study is about the development of a system related to the CATV network. It intends to develop an automatically centralized Headend system and a distributive system to remove the ineffectiveness of the established manual system. To achieve this goal, we took a pan of bandwidth, which is not used for the transmission of video signals in the established frequency bandwidth, and used it for the transmission and receiver of controlling signals. By this way we could design a system of transmission and receiver and a automatic distributive system. We developed an information management system for the 9600bps CATV using RS-232 of forward/backward communication and backward communication.

A Study on Real Time Price Comparison Shopping Agent (실시간 가격비교 쇼핑 에이전트에 관한 연구)

  • 박나연;조이기;김원중
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2002.10e
    • /
    • pp.340-342
    • /
    • 2002
  • 최근 인터넷 인구의 급격한 증가로 인터넷 쇼핑몰 사이트들이 기하급수적으로 증가하고 있다. 따라서 인터넷 쇼핑몰을 통하여 물품을 구매하고자 하는 고객들은 어떤 쇼핑몰사이트의 가격이 가장 싼 지를 결정하는 것이 점점 어려워지고 있다. 이때 대부분의 사용자들이 사용하는 것이 가격비교 사이트들이다. 그러나 shopbinder, yabis, omi와 같은 기존의 가격 비교 쇼핑 에이전트들은 사용자가 가격과 같은 제품 정보를 확인하기 위해 반드시 그 사이트에 접속하여야 한다. 본 논문에서는 가격 비교 쇼핑 에이전트에 접속하지 않고서도 변동되는 가격 정보를 얻을 수 있으며, 쇼핑몰의 네트워크에 최소한의 부하를 주면서도 정확한 가격 정보를 직접 얻을 수 있는 BPS(Best Price Search) 시스템에 관해 연구하였다.

  • PDF

Development of a Power-tiller TMF Mixer (동력경운기 견인형 TMF 배합기의 개발)

  • Jo, Gi-Hyeon;Lee, Jeong-Taek;Baek, Lee
    • Journal of Biosystems Engineering
    • /
    • v.28 no.2
    • /
    • pp.97-106
    • /
    • 2003
  • One of the obstructing factors against managing dairy fm has been heavy labor requirement for feeding dairy cows. A Power-tiller TMF mixer was developed to reduce the cost and to provide economic benefit. The TMF mixer was desisted by the feeding capacity of 20∼30 heads at a batch with various functioning systems of auger type mixer, delivery conveyer, weighing console, pipe heater type heating system, power transmission train and mounting trailer. According to the study resulted, it showed that 1,200rpm, 1,600rpm, 2,000rpm and 2,300rpm were 6ps. Bps, lops and 12ps respectively. and that reduced shaft output by 15%. On the fodder mixer attached powertiller, initial output was necessary large torque. And the heating system was maintaining uniform temperature 60$^{\circ}C$ relatively.

The Change of the Vital Sign by the Variables of Stimulated Areas in Interferential Current Treatment (간섭 전류 치료의 자극부위에 따른 활력징후의 변화)

  • Park, Young-Han
    • Journal of Korean Physical Therapy Science
    • /
    • v.16 no.3
    • /
    • pp.1-9
    • /
    • 2009
  • Background: The purpose of this study is to have examined the influence on the blood circulation by comparing the differences between stimulating the sympathetic ganglion and the muscle group among the stimulation variables in interferential current stimulation. Method: The object of the study is the twenties(M=8, F=12), who are in great condition and have no pathological report for the blood circulation influence. The intensity of the inferential current stimulation is the medium degree, 100 bps constant current, which is the comfort and degree to confirm the muscle contraction. The areas stimulated are the stellate ganglion area in the seventh cervical vertebrae and the forearm muscle area. Results: We have made sure that there is no change in blood pressure and pulse and that the change in the skin temperature occurred highly. Conclusion: In considering the change of the blood circulation in case of stimulation area by the inferential current stimulation, we have seen that stimulating the sympathetic ganglion area is more effective than stimulating muscle area directly.

  • PDF

Essence Applicability Matrices for the Reduction of Project Cycle Time

  • Hong, Tae Hoon;Son, Jae Ho
    • Architectural research
    • /
    • v.8 no.1
    • /
    • pp.57-68
    • /
    • 2006
  • Global competition and reduced project life cycle ultimately puts greater performance requirements on the capital project delivery systems used to maintain competitiveness. Despite continuing improvements in delivery cycle time, business owners of facilities continue to demand greater improvements in project delivery cycle time. Therefore, it is very important to investigate the various techniques and methods leading to reduction in project cycle time and also identify the applicability of identified techniques and methods. This paper introduces reduction techniques identified through literature review (i.e, Schedule Reduction Techniques (SRTs), Management Techniques (MTs), and Construction Institute Industry (CII) Best Practices (BPs). In order to collect applicability of these techniques under different project phases (Pre-project planning (PPP), Design (D), Material Management (MM), Construction (C), and Start-up (SU)), the Essence Applicability Matrices (EAM) is used.

Bootstrapping of Hanwoo Chromosome17 Based on BMS1167 Microsatellite Locus

  • Lee, Jea-Young;Lee, Yong-Won;Yeo, Jung-Sou
    • Journal of the Korean Data and Information Science Society
    • /
    • v.18 no.1
    • /
    • pp.175-184
    • /
    • 2007
  • LOD scores and a permutation test for detecting and locating quantitative trait loci (QTL) from the Hanwoo economic trait have been described and we selected a considerable major BMS1167 locus for further analysis. K-means clustering analysis, for the major DNA marker mining of BMS1167 microsatellite loci in Hanwoo chromosome17, has been tried and three cluster groups divide four traits. The three cluster groups are classified according to eight DNA marker bps. Finally, we employed the bootstrap test method to calculate confidence intervals using the resampling method to find major DNA markers. We conclude that the major marker of BMS1167 locus in Hanwoo chromosome17 is only DNA marker 100bp.

  • PDF