• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.533-539
• /
• 2004

In this work, in order to realize a band pass filter with wide-band characteristics for mobile communications, 2 GHz band pass filter was designed using ring resonator with stub. The three stage wide-band BPF was designed and fabricated. For broadband design, the ring circumference was divided by 4 sections with 1/8 wavelength and 2 sections with 1/4 wavelength which have different line impedances. The characteristics of the proposed BPF were highly improved by using three stage ring resonator. The characteristic impedance values of each sections were obtained by Powell's least square algorithm where differentiations are not needed. The measured results showed a good agreement with the theoretical results as well as ADS simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.168-172
• /
• 2012

This paper is focusing on the comparison of different kinds of BPFs(Band Pass Filters) passing signals with a particular frequency band. According to the different classifications, features and target application systems, BPF has many types. Chebyshev filter which has a steep slope and a few ripples, and Butterworth filter which has no ripple but gentle slope are the most typical BPFs. The ideal filter is flat in the passband and the slope in the transition band is perpendicular. In this paper, we suggest the cascading Chebyshev BPF with the advantages of the Chebyshev filter and the Butterworth filter simultaneously to make a closest filter to an ideal filter. The proposing BPF is the tenth Chebyshev BPF cascading the fourth and the sixth, and it is designed as the tenth cascading Chebyshev BPF. To measure the performance of the designing filter, we have compared and analyzed the tenth Chebyshev filter with the tenth Butterworth filter. As a result, the tenth cascading Chebyshev BPF has decreased the ripple more than 1/4 [dB] in the passband. Finally, the output of the simulation showed the validity of the proposing cascading Chebyshev filter.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.182-186
• /
• 2004

In this paper, 2.4GHz WLAN BPF(Band Pass Filter) which has two DGS(Defected Ground Structure) unit cells was simulated and manufactured. To do this, a unit DGS resonator with resonant frequency is designed. Then the BPF for WLAN with the center frequency of 2.4GHz md the bandwidth of 200MHz is designed using two DGS resonator, finally this circuit is fabricated. We also proposed the equivalent circuit of the BPF employing two DGS resonator. The BPF with DGS was obtained experimental results with network analyzer Agilent 8510C. The measured result shows good agreement with simulated data. Experimental results show the center frequency of 2.45GHz, the insertion loss of 1.08dB, and the 3-dB bandwidth of 470MHz(19.5%). Acceding to the measured values, it is found that the fabricated DGS BPF is available for wireless LAN.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.676-679
• /
• 2001

A low-temperature cofired-ceramic (LTCC) multi-layer ceramic (MLC) band-pass filter (BPF) is presented, which has the benefits of low cost and small size. The BPF is designed for a IMT-2000 handset. The computer-aided design technology is also presented. The BPF with an attenuation pole at below the passband has been discussed and realized. The equivalent circuit of the BPF was established by transmission lines and lumped capacitors. The frequency characteristics of the LTCC-MLC BPF is well acceptable for IMT-2000 application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.56-60
• /
• 2002

A low-temperature cofired-ceramic (LTCC) multi-layer ceramic (MLC) band-pass filter (BPF) is presented, which has the benefits of low cost and small size. The BPF is designed for an IMT-2000 handset. The computer-aided design technology is also presented. The BPF with an attenuation pole at below the passband has been discussed and realized. The equivalent circuit of the BPF was established by transmission lines and lumped capacitors. The frequency characteristics of the LTCC-MLC BPF is well acceptable for IMT-2000 application.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.39-44
• /
• 2021

In this paper, two types of BPF(Band Pass Filter) which are hair-pin and interdigital have been designed for millimeter-wave application using two types of material which are LCP(Liquid Crystal Polymer) and PTFE(Polytetrafluoroethylene) and also, their performances such as bandwidth, insertion loss, and in-band flatness are compared. The proposed BPF are designed as third-order filters, and their pass band is from 26.5 GHz to 27.3 GHz. Interdigital BPF using PTFE substrate has most wide -3 dB S21 bandwidth of 7.8 GHz and hair-pin BPF using LCP substrate has most narrow -3 dB S21 bandwidth among the proposed four BPF. For in-band insertion loss, hair-pin BPF using PTFE substrate achieves low insertion loss better than -0.667 dB, and hair-pin BPF using LCP substrate exhibits relatively high insertion loss among the proposed four BPF better than -0.937 dB. However, the maximum difference in insertion loss performance among the proposed four BPF is 0.27 dB, which is too small to negligible. For in-band flatness, interdigital BPF using PTFE substrate shows greatest performance of 0.017 dB, and hair-pin BPF using LCP substrate exhibits the lowest performance of 0.07 dB. There are tiny difference in in-band flatness performance of 0.053 dB. As a results, it is considered that the BPF using LCP substrate can derive the performances similar to that of the BPF using PTFE substrate in Millimeter-wave band.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.37-43
• /
• 2013

In this paper, an UWB (Ultra Wide Band) band-pass filter with open stubs using SIR (Stepped Impedance Resonator) structure is presented. The proposed band pass filter (BPF) has SIR structure instead of open stubs for UWB application with low insertion loss. The bandwidth of the proposed BPF is 103 % at the center frequency of 5.8GHz and the insertion and return losses are 0.17dB and 13.1dB, respectively. Also, the entire size of the proposed band-pass filter is $21.6{\times}17.8mm^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.191-194
• /
• 1999

Recently, with the rapid development and demand for compactness of portable communications, the requirement for compact and low-cost filter is increasing. One of the methods for reducing size and cost is to use high dielectric constant and low loss dielectric material in filter. The other is new monoblock dielectric band-pass filter (BPF) which has holes in a single dielectric body without additional coupling elements. This structure effectively reduces the size and cost of the filters. For previous conventional coaxial type dielectric BPF, dielectric substrates were used for coupling between adjacent resonators and additional input and output ports were needed. Coupling between adjacent resonators of monoblock BPF can be otained via electrode pairs. Capacitances of electrode pair structure for coupling are intensively investigated by 3-D FEM. The BPF for PCS has been designed to have a 30 MHz pass-bandwidth with center frequency of 1855 MHz and an attenuation pole at below the passband using a commercial 3-D structure simulator.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.620-624
• /
• 2010

In this paper, design and manufactured UWB BPF. Manufactured UWB BPF can miniaturize the structure by controlling impedance and biographical one dimension that is allocated in transmission line each section. Proposed UWB BPF designed most suitable using Agilent company's ADS2008 Momentum and Ansoft company's HFSS 10. Manufactured UWB BPF has pass-band filter of 3.1 [GHz]~10.6 [GHz] and insertion loss is 0.39 [dB] in 8.3 [GHz], and reflection loss displayed special quality of 12.394 [dB] in 9.37 [GHz].

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.333-337
• /
• 2003

In this paper, 5.2 GHz WLAN BPF(Band Pass Filter) using LTCC(Low temperature co-firing ceramic) Multilayer technology was simulated and manufactured. A DGS(Defected Ground structure) resonator with spiral ground pattern is used to shorten resonator size and improve circuit Q factor. And the equivalent circuit of BPF was suggested. The measured result shows good agreement with simulated data. Experimental results show the center frequency of 5.25GHz, the insertion loss of 0.14dB, and the 3-dB bandwidth of 350MHz (6%). The center frequency of BPF is 5.25GHz which is available for wireless LAN.