• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.441-443
• /
• 2005

According as CCFL(Cold Cathode Fluorescent lamp) of light source in Backlight unit for Note PC (Personal computer) is presently needed to low power consumption and long life time, the development focus of CCFL is going on the discharge gas, phosphor and electrode material. First of all, discharge voltage characteristic of CCFL is closely connected with electrode material For low discharge voltage, the characteristic of electrode material is needed to low work function, low sputtering ratio and superior manufacturing property. We developed new CCFL with Nb/Ni Clad electrode superior to conventional CCFL. Because Nb/Ni Clad electrode with Ni material and Nb material, the electrical characteristic is superior to other electrode materials. The electrode of Nb/Ni Clad is composed that Ni of outside material has superior manufacturing property and Nb of inside material has low work function. Nb/Ni Clad of new electrode material is made by process of Rolling mill at high pressure and heat treatment. We compared electrical characteristic of Nb/Ni clad electrode with conventional Mo electrode by measurement. Mo electrode and Nb/Ni Clad electrode of cup type with diameter 1.1 mm and length 3.0mm are used to this experiment. Material content of Mo electrode is Mo 100%. But, Nb/Ni Clad electrode is composed by content of Nb 40% and Ni 60%. The result of comparison measurement between new CCFL with Nb/Ni Clad electrode and conventional CCFL was appeared that CCFL with Nb/Ni Clad electrode had superior characteristic than conventional CCFL. As a result of experiment, we completed Note PC with low power consumption and long life time by application of new CCFL with Nb/Ni Clad electrode.

• Journal of Welding and Joining
• /
• v.30 no.3
• /
• pp.26-31
• /
• 2012

Three-dimensional integrated circuit (3D IC) technology has become increasingly important due to the demand for high system performance and functionality. We have evaluated the effect of Buffered oxide etch (BOE) on the interfacial bonding strength of Cu-Cu pattern direct bonding. X-ray photoelectron spectroscopy (XPS) analysis of Cu surface revealed that Cu surface oxide layer was partially removed by BOE 2min. Two 8-inch Cu pattern wafers were bonded at $400^{\circ}C$ via the thermo-compression method. The interfacial adhesion energy of Cu-Cu bonding was quantitatively measured by the four-point bending method. After BOE 2min wet etching, the measured interfacial adhesion energies of pattern density for 0.06, 0.09, and 0.23 were $4.52J/m^2$, $5.06J/m^2$ and $3.42J/m^2$, respectively, which were lower than $5J/m^2$. Therefore, the effective removal of Cu surface oxide is critical to have reliable bonding quality of Cu pattern direct bonds.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1197-1199
• /
• 2004

We have studied an optically compensated splay (OCS) mode driven by fringe electric field. The OCS configuration obtained by applying voltage to vertically aligned LCs shows a dark state when an optic axis of the OCS cell coincides with one of crossed polarizer axis. When the fringe electric field is applied, the LC director rotates in plane above whole electrode surface, giving rise to the high transmittance, the low operating voltage and wide viewing angle simultaneously.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.512-515
• /
• 2003

We have studied a novel vertical alignment liquid crystal cell. At initial state of a cell with rubbed parallel on top and bottom substrates, the vertically aligned LCs are twisted by $180^{\circ}$. However, after a critical voltage is applied to the cell, the configuration of the LC changes to optically compensated splay form, where the mid-director lies parallel to the substrate and thus the LC has two hybrid alignments around center.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.169-172
• /
• 2004

최근 LCD 노트북 제품의 고유한 특정인 경박단소가 요구되면서, 백라이트의 박형화로 인해 광원으로써 램프의 세경화에 대한 개발도 진행되고 있다. 특히, 노트북용 램프의 경우 발열이 심해 도광판을 비롯한 시트류의 주름현상이 발생하며, 수명연장을 위해서 전극의 표면적이 넓거나 일함수(work functuon)가 작은 재질의 개발이 필요하다. 따라서 노트북용으로 저발열, 장수명을 위한 램프를 개발하고 있으며, 본 연구에서도 기존 Ni 전극을 사용한 램프 대비 Nb, Mo, Ta 전극을 사용했을때 통일한 구동조건에서 103%의 휘도특성 개선을 확인할 수 있었고 수명면에서도 기존 Ni 전극 대비 일함수가 낮은 Nb, Mo, Ta 전극을 사용한 램프의 경우 시간경과에 따른 휘도저하가 낮은 것으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.345-348
• /
• 2005

In this paper we propose a configuration for an optically compensated bend (OCB) mode using circular polarizers with wide-band wide-viewing-angle (WBWA) quarter-wave plates (QWPs). Parameters of LC material and compensation films are optimized for wide viewing angle characteristics and excellent spectral properties of the OCB mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.426-429
• /
• 2005

The fringe-field switching (FFS) mode associated with a transition from a homogenously aligned to twist deformation require rubbing process. In this devices, $1^o$ of misalignment in an azimuthal direction could cause voltage-dependent transmittance (V-T) to be different from that in a normal area and consequently results in a rubbing mura. According to our studies, the single domain FFS cells are much more sensitive to the rubbing mura than the dual domain FFS cell. Moreover, the FFS cells with negative LC are much more sensitive to the rubbing mura than the FFS cells with positive LC.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.459-460
• /
• 2006

• Journal of Engineering Education Research
• /
• v.14 no.1
• /
• pp.74-81
• /
• 2011

In this paper, the author researched to enhance course outcomes while increasing the interest in engineering design through the 'Introduction to Engineering Design Course'. Deviating from the current practice of engaging in content-oriented lectures, the redesign of the weekly lecture has been conducted with a focus on learning achievement in order to enhance design competency, teamwork and communication skills, which are the goals of the PO3, PO6 and PO7, respectively. Moreover, assessment tools have been developed according to learning achievement, and rubrics, the measurement criteria, have been defined according to the respective assessment tools, along with course goals for learning achievement and results analysis. To enhance course learning achievement, as well as to induce interest in and satisfaction with the 'Introduction to Engineering Design Course', a design project utilizing a Boe-Bot robot has been carried out. An evaluation on learning achievement and lecture has identified an increase in learning achievement and interest in design in comparison with that of previous lectures.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.167-173
• /
• 2000

For selective elimination of salt from boiled oyster extract (BOE), electrodialyzer was used and the desalination conditions of B BOE were investigated. The ion-exchange membrane with a molecular weight cut off 100 Da was used for desalting of B BOE. The desalination efficiency at pH 4.0 was 13% higher than that at pH 9.0 when BOE was desalted for 90min. The e electrodialysis pro$\infty$ss could remove above 90% of the initial salt content when 5% BOE was desalted at pH 5.62 for 1 100min. The initial volume and concentration of permeation solution did not have significant effects on desalination time and r ratio. The important factors for the desalination of BOE were found to be pH and concentration of BOE. The results obtained prove that electrodialysis is a practical solution to the problem of selective elimination of salt from BOE.