• 제목/요약/키워드: BOARD CONTACT

검색결과 148건 처리시간 0.025초

KOMPSAT SATELLITE LAUNCH AND DEPLOYMENT OPERATIONS

  • Baek, Myung-Jin;Chang, Young-Keun;Lee, Jin-Ho
    • Journal of Astronomy and Space Sciences
    • /
    • 제16권2호
    • /
    • pp.199-208
    • /
    • 1999
  • In this paper, KOMPSAT satellite launch and deployment operations are discussed. The U.S. Taurus launch vehicle delivers KOMPSAT satellite into the mission orbit directly. Launch and deployment operations is monitored and controlled by several international ground stations including Korean Ground Station (KGS). After separation from launch vehicle, KOMPSAT spacecraft deploys solar array by on-board autonomous stored commands without ground inter-vention and stabilizes the satellite such that solar arrays point to the sun. Autonomous ground communication is designed for KOMPSAT for the early orbit ground contact. KOMPSAT space-craft has capability of handing contingency situation by on-board fault management design to retry deployment sequence.

  • PDF

테라헤르츠 전자기 펄스의 반사특성을 이용한 굴절률 측정 (Index of refraction measurement using the reflection characteristics of terahertz electromagnetic pulses)

  • 전태인
    • 한국광학회지
    • /
    • 제12권1호
    • /
    • pp.1-4
    • /
    • 2001
  • 테라헤르츠 레이다를 이용하여 알루미늄 거울 및 도체와 부도체로 이루어진 각각의 물질에 대한 테라헤르츠 전자기 펄스의 반사특성을 측정하였다. 알루미늄 거울로부터 반사된 테라헤르츠 펄스의 크기변화를 측정하기 위하여 최고 9회까지 테라파를 반사시켜 펄스의 크기에 대한 변화가 없음을 확인하였다. 또한 알루미늄 거울의 반사각도에 대한 테라파의 영향을 측정하였다 알루미늄 거울에 대한 반사파를 reference로 하여 알루미늄 board, 순수실리콘, quartz, 그리고 LDPE 에 대한 테라파의 반사를 측정하여 각각의 물질에 대한 테라헤르츠 영역의 반사계수와 굴절률을 측정하였다. 이러한 측정법은 sample의 두께에 무관한 비접촉 테라헤르츠 분석법의 적용이라할 수 있다.

  • PDF

재래시장 전기설비 실태조사 분석 (Analysis of Electrical Installation Survey at Conventional Markets)

  • 이상익;전현재;김기현;배석명
    • 전기학회논문지P
    • /
    • 제57권2호
    • /
    • pp.186-191
    • /
    • 2008
  • The conventional markets is badly damaged by a big fire because of no proper fire fighting management system. The cause of electricity fire is the aging and contact badness of electric equipment. The supervisory detecting system is needed to develop because the electric equipment is located to non visible and non exposing place. In this paper, we investigated the receiving and distributing board, the panel board and the fire prevention system of 17 domestic conventional markets. As a result of survey, capacity of distributing boards is mainly 600A and materials of distributing boards are synthetic resins 49%, metal 44%. ELB is mainly used as branch circuit breaker.

포장돈육 가공공정 중 Listeria monocytogenes에 오염된 돈육으로부터 오염 부착율 (Adherence Rate of Listeria monocytogenes Contaminated from Pork Meat During Pork Meat Processing)

  • 김성조;박경진;오덕환
    • 한국식품위생안전성학회지
    • /
    • 제22권4호
    • /
    • pp.332-337
    • /
    • 2007
  • L. monocytogenes 표준균주와 분리균주에 오염된 돈육을 $10^{\circ}C$에서 다른 돈육(삼겹살, 안심), 컨베이어벨트와 스테인리스 스틸, 도마에 일정시간(2, 4, 24시간)동안 접촉시킨 후 부착율을 조사하였다. LM 표준균주와 분리균주에 오염된 돈육으로부터 삼겹살과 안심에 2시간 접촉 시 부착율은 약 65-79%를 나타내었으나 6시간 이후부터는 두균 모두 100%의 부착을 보였다. 돈육으로부터 컨베이어 벨트로의 부착율은 표준균주의 경우 24시간 후 0.19%의 부착율을 나타내었으나 분리균주는 2시간 접촉시 4.34%에서 24시간 후 28.6%로 급격히 증가하였다. 또한, 돈육으로부터 스테인레스 스틸로의 부착율은 표준균주는 2시간 후 2.63%의 부착율을 나타내었으나 24시간 후에는 0.39%로 감소하였고, 분리균주는 2시간 후 전혀 접촉이 없었으나 24시간 후에는 24.4%로 현저하게 증가하였다. 반면에 돈육으로부터 도마로의 부착율은 표준균주 및 분리균주 모두 전혀 부착하지 않았다. 본 연구결과, L. monocytogenes균에 오염된 돈육에서 다른 돈육 또는 식품접촉면으로의 부착율은 접촉시간에 따라 영향이 컸으며 분리균주가 표준균주에 비하여 현저하게 높은 부착율을 나타내었다.

표면 가공형 캐비티 압력센서를 이용하여 비전도성 물질용 패키지 기술에 전기적 제어방식 연구 (The Electric Control Method on the Packaging Technology for Non-Conductive Materials Using the Surface Processing Cavity Pressure Sensor)

  • 이선종;우종창
    • 한국전기전자재료학회논문지
    • /
    • 제33권5호
    • /
    • pp.350-354
    • /
    • 2020
  • In this study, a pressure sensor for each displacement was fabricated based on the silicon-based pressure sensor obtained through simulation results. Wires were bonded to the pressure sensor, and a piezoresistive pressure sensor was inserted into the printed circuit board (PCB) base by directly connecting a micro-electro-mechanical system (MEMS) sensor and a readout integrated circuit (ROIC) for signal processing. In addition, to prevent exposure, a non-conductive liquid silicone was injected into the sensor and the entire ROIC using a pipette. The packaging proceeded to block from the outside. Performing such packaging, comparing simple contact with strong contact, and confirming that the measured pulse wavelength appears accurately.

자기부상열차의 급전시스템 검토 (Analysis of the Power Supply System of a Maglev Train)

  • 이형우;권삼영;박현준
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
    • /
    • pp.209-218
    • /
    • 2006
  • This paper presents the comparison and analysis of the power supply system of a Maglev train and conventional electric railway. Even though all Maglev trains have batteries on their vehicles, electric power supply from the ground side is necessary for levitation, propulsion, on-board electrical equipment, battery recharging, and so on. At low speeds up to $100{\sim}150(km/h)$, the Maglev train, generally, uses a mechanical contact, a current collector as same as conventional electric railway. However, at high speeds, the Maglev train can no longer obtain power from the ground side by using a mechanical contact. Therefore, high speed Maglev trains use their own way to deliver the power to the vehicle from the ground. In this paper, the power supply systems of the german, japanese, and korean low- and high-speed Maglev trains have been reviewed.

  • PDF

Compliant Press-Fit Pin 결합에서 발생하는 음력분포특성에 대한 유한요소해석 (Finite Element Analysis of the Stress Distribution Characteristics in the Compliant Press-Fit Pin Connection)

  • 김병탁
    • 한국해양공학회지
    • /
    • 제14권4호
    • /
    • pp.79-85
    • /
    • 2000
  • Press-fit pin connection is the solderless interference-fit between pins and plated through holes(PTH) in the printed curcuit board(PCB). Because of not only its simple assembly and absence of problems associated with soldering, but also its good mechanical and electrical characteristics, the press-fit pin connection technology has quickly gained wide acceptance in the telecommunications and computer industries. In this paper, the contact stress characteristics of the domestic CPF pin when inserted into the friction coefficients were compared and the stress variations of the compliant part of the pin, which have an influence on the performance, were displayed with the time and arc length after complete connected. It is supposed that the results will provide useful data to improve the performance of the pin-PCB interconnection mechanism.

항공방제용 지면속도 감시장치의 개발 (Development of a Ground Speed Monitoring System for Aerial Application)

  • 구영모;알빈워맥
    • Journal of Biosystems Engineering
    • /
    • 제25권3호
    • /
    • pp.233-240
    • /
    • 2000
  • A commercially available Doppler radar was modified and evaluated for on-board monitoring of ground speed. The radar output was corrected for pitch angle of aircraft based on the output of an electrolytic tilt sensor. The effects of aircraft speed, height and mounting angle on error in the ground speed were evaluated. The speed error decreased with an increase of the mounting angle since the radar contact angle with respect to the ground approached to the mounting angle. The error increased with an increase of the nominal aircraft speed. The altitude insignificantly affected the speed error. The Doppler radar provided acceptable percent errors within 5% in most measurements. The error can be reduced within ${\pm}$1.5% by increasing the mounting angle ($43^{\circ}$). The error of -3.8% at the mounting angle of $29^{\circ}$could be reduced by adjusting the mounting angle with respect to the radar contact angle.

  • PDF

치료 보조기구 사용 시 후 방향 피부선량 측정 (Measurement of Skin Dose from Using the Treatment Immobilization Devices)

  • 제재용;박철우;노경석
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제32권1호
    • /
    • pp.107-110
    • /
    • 2009
  • 본 연구는 인체 팬텀(alderson rando phantom)의 등쪽에 원통형 전리함을 부착하여 방사선 치료 조사야내 환자와의 접촉 물질과 조사 야의 크기, 방사선 입사각도에 따른 피부 후 방향 선량 변화를 조사하 다. 연구 결과 테니스 라켓 줄(tennis racket)의 마일러(mylar)를 기준으로 첫째 : 조사야 $10{\times}10\;cm^2$ 기준으로 면(cotton)은 약 2%, breast board는 약 8%, $15{times}15\;cm^2$에서는 약 6%, $20{\times}20\;cm^2$는 약 10% 증가하였으며, $5{\times}5\;cm^2$에서는 약 13% 정도 감소하였다. 둘째 : 방사선 입사각도가 $0^{\circ}$로 기준으로 하여 $5^{\circ}$에서는 breast board 0.4%, tennis racket 0.5%, cotton 1.1%, $10^{\circ}$에서는 breast board 1.5%, tennis racket 1.9%, cotton 2.6%, $15^{\circ}$에서는 breast board 3.9%, tennis racket 2.6%, cotton 3.86% 감소하였다. 결과적으로 carbon 재질의 치료보조기구는 피부표면선량의 크게 증가하므로 치료조사야 내에서는 피부와의 접촉을 피해야 한다.

  • PDF

이미지 처리기술을 이용한 펜터그라프 섭판 측정장치 개발 (Measurement System of Pentagraph Slider with Image Processing)

  • 김기택;임기택;김봉택
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1998년도 추계학술대회 논문집
    • /
    • pp.296-301
    • /
    • 1998
  • Pentagraphs are used to supply electric power to train via trolley lines. The higher train speed is, the higher voltage and current levels 8u. Since electric power is supplied with slinding contact, localized abrasion is inevitable. It is difficult and dangerous to measure their shape manually. Measurement system of pentagraph slider with ultrasonic processing has been reported. In this paper, measurement system with image processing is proposed. The system consists of CCD cameras, image grabber board, and PC operated on Windows'95. Image processing algorithms are presented and some results are illustrated.

  • PDF