• 제목/요약/키워드: BM S

검색결과 581건 처리시간 0.022초

다중 증폭 회로를 이용한 높은 선형 특성을 갖는 광대역 능동 안테나 설계 (Design of a Highly Linear Broadband Active Antenna Using a Multi-Stage Amplifier)

  • 이철수;정근석;백정기
    • 한국전자파학회논문지
    • /
    • 제19권11호
    • /
    • pp.1193-1203
    • /
    • 2008
  • 능동 안테나는 수동 안테나에 비하여 소형으로 광대역 특성 및 높은 이득을 얻을 수 있으나, 잡음 및 불요파 신호가 발생되는 단점이 있다. 또한, 수신 시스템의 초단부에 위치하므로, 고감도 수신 시스템을 위하여 불요파 신호 특성이 좋아야 한다. 본 연구에서는 출력단 P1dB가 3 dBm 이상이고 $100{\sim}500\;MHz$에서 동작하며, 실환경에서 높은 선형 특성을 갖는 능동 안테나를 개발하였다. 이를 위하여 공통 드레인 FET와 2단 BJT의 능동 회로를 구성하였고, ADS를 이용하여 능동 안테나를 설계하였다. 제작된 능동 안테나의 평균 이득, 평균 잡음 지수, OIP3, VSWR 및 P1dB는 각각 9.7 dBi, 10 dB, 14 dBm, 1.7:1 및 3 dBm으로 설계치와 잘 일치하였다. 도심 인근지역에서 측정된 수신 스펙트럼 특성은 설계된 능동 안테나가 CS 구조를 갖는 참고문헌 [9]의 안테나보다 불요파 신호 특성이 약 $10{\sim}30\;dB$가 개선되어 방송 및 상용 신호와 혼재된 상태에서 신호 세기가 약한 미지의 신호를 검출하기 위한 고감도 수신 시스템에 적용할 수 있음을 보였다.

마이크로파 주파수 하향 변환기에서의 대역 평탄도 개선을 위한 여파기 집적형 단일 평형 다이오드 혼합기 설계 (Design of Single Balanced Diode Mixer with Filter for Improving Band Flatness in Microwave Frequency Down Converter)

  • 유승갑;황인호;한석균
    • 한국전자파학회논문지
    • /
    • 제18권1호
    • /
    • pp.37-43
    • /
    • 2007
  • 본 논문에서는 유럽형 점 대 점 마이크로파 고정 통신에 이용되는 주파수 하향 변환기 설계에 있어, 평탄도 개선 측면에서 접근한 단일 평형 주파수 혼합기의 설계 및 제작 결과에 대해 소개하도록 한다. 일반적인 주파수 하향 변환기의 구성에서 주파수 혼합기에 연결되는 RF필터 등의 여파기 임피던스 특성이 RF 대역에서만 유지되고 LO 대역에서는 그 특성이 달라져 LO 구동 전력이 혼합기 다이오드에 불규칙하게 인가됨에 따라 대역 평탄도 특성이 악화된다. 이에 대해 본 논문에서는 영상 대역 제거 필터 및 LO 고조파 필터를 혼합기 내에 집적하고 여파기와 혼합기 포트 간 전기적 길이를 이용하여, 평탄도 특성에 대한 여파기의 영향을 최소로 한 여파기 집적형 주파수 혼합기를 설계하였다. 제작된 주파수 혼합기는 RF 대역 $21.2{\sim}22.6\;GHz$, LO 대역 $19.32{\sim}20.72\;GHz$ IF 대역 1.88 GHz+/-50 MHz의 주파수 재원을 가지며, LO 구동 전력 10 dBm에서 영상 대역 제거 필터를 포함한 변환 손실이 8.5 dB, 대역평탄도 2 dB, 입력 PldB 8 dBm, 입력 IIP3 15 dBm의 특성을 보였다. RF, LO 및 IF 포트의 반사 손실은 각각 -12 dB, -10 dB, -5 dB의 특성을 보였다. LO/RF, LO/IF 격리도는 각각 20 dB, 50 dB로 측정되었다.

Generation of $CD2^+CD8^+$ NK Cells from c-$Kit^+$ Bone Marrow Cells in Porcine

  • Lim, Kyu-Hee;Han, Ji-Hui;Roh, Yoon-Seok;Kim, Bum-Seok;Kwon, Jung-Kee;You, Myoung-Jo;Han, Ho-Jae;Ejaz, Sohail;Kang, Chang-Won;Kim, Jong-Hoon
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제16권3호
    • /
    • pp.167-174
    • /
    • 2012
  • Natural killer (NK) cells provide one of the initial barriers of cellular host defense against pathogens, in particular intracellular pathogens. Because bone marrow-derived hematopoietic stem cells (HSCs), lymphoid protenitors, can give rise to NK cells, NK ontogeny has been considered to be exclusively lymphoid. Here, we show that porcine c-$kit^+$ bone marrow cells (c-$kit^+$ BM cells) develop into NK cells in vitro in the presence of various cytokines [interleukin (IL)-2, IL-7, IL-15, IL-21, stem cell factor (SCF), and fms-like tyrosine kinase-3 ligand (FLT3L)]. Adding hydrocortisone (HDC) and stromal cells greatly increases the frequency of c-$kit^+$ BM cells that give rise to $CD2^+CD8^+$ NK cells. Also, intracellular levels of perforin, granzyme B, and NKG2D were determined by RT-PCR and western blotting analysis. It was found that of perforin, granzyme B, and NKG2D levels significantly were increased in cytokine-stimulated c-$kit^+$ BM cells than those of controls. And, we compared the ability of the cytotoxicity of $CD2^+CD8^+$ NK cells differentiated by cytokines from c-$kit^+$ BM cells against K562 target cells for 28 days. Cytokines-induced NK cells as effector cells were incubated with K562 cells as target in a ratio of 100 : 1 for 4 h once a week. In results, $CD2^+CD8^+$ NK cells induced by cytokines and stromal cells showed a significantly increased cytotoxicity 21 days later. Whereas, our results indicated that c-$kit^+$ BM cells not pretreated with cytokines have lower levels of cytotoxicity. Taken together, this study suggests that cytokines-induced NK cells from porcine c-$kit^+$ BM cells may be used as adoptive transfer therapy if the known obstacles to xenografting (e.g. immune and non-immune problems) were overcome in the future.

ZigBee 응용을 위한 900MHz CMOS RF 송.수신기 구현 (Implementation of a CMOS RF Transceiver for 900MHz ZigBee Applications)

  • 권재관;박강엽;최우영;오원석
    • 대한전자공학회논문지TC
    • /
    • 제43권11호
    • /
    • pp.175-184
    • /
    • 2006
  • 본 논문은 ZigBee 응용을 위한 900MHz ISM 밴드용 RF 송 수신기 설계에 관한 기술이다. 수신단은 저잡음 증폭기, 하향믹서, 프로그래머블 이득증폭기, 밴드패스필터로 구성되며, 송신단은 밴드패스필터, 프로그래머블 이득증폭기, 상향믹서, 구동증폭기로 구성된다. 송 수신단은 Low-IF 구조를 사용하였다. 또한, 송 수신단을 구성하는 각각의 블록은 저전력 기술을 사용하여 전체적인 전류 소모를 줄였다. Post-레이아웃 시뮬레이션으로 전체 송 수신기의 성능을 검증하였으며, 0.18um RF CMOS 공정을 이용하여 칩으로 구현하였다. 측정결과 제작된 칩셋은 -92dBm의 최소 수신 입력 레벨을 갖으며, 0dBm의 선형적인 최대 송신 출력 레벨을 갖는다. 또한, 전력 소모는 32mW(@1.8VDD)이며, ESD 방지 다이오드 패드를 포함한 칩 면적은 $2.3mm{\times}2.5mm$이다.

Characterization of Ecdysteroid UDP-Glucosyltransferase Gene Promoter from Bombyx mori Nucleopolyhedrovirus

  • Zhang, Zhi-Fang;Shen, Xing-Jia;Yi, Yong-Zhu;Tang, Shun-Ming;Li, Yi-Ren;He, Jia-Lu;Wu, Xiang-Fu
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제8권2호
    • /
    • pp.169-174
    • /
    • 2004
  • Bombyx mori nucleopolyhedrovirus(BmNPV) ecdysteroid UDP-glucosyltransferase gene (egt) promoter fragments of different lengths were amplified from BmNPV ZJ-8 genomic DNA by PCR. Reporter plasmids pBmegt542-luc, pBmegt309-luc and pBmegtl59-luc with luciferase (lue) driven by egt promoters were constructed. Both in vitro and in vivo expressions showed that BmNPV egt promoter activity requires the transactivation of viral factor(s), and expression of luc was detected earliest at 24 hrs post infection (pi). BmNPV ZJ-8 homologous region 3 (hr3) increased the expression of luc by over 1,600-fold. Molting hormone of 1.0 - 2.0 $\mu\textrm{g}$/$m\ell$ can dramatically down regulate expression of luc. Juvenile hormone analogue of 0.5-2.0 ${\mu}g$/$m\ell$ increased expression of luc by 145.8% to 75.7%. Deletion assay revealed that the promoter fragment of 159 bp contains the basal promoter structure; Promoter fragments of 309 bp and 542 bp showed similar but much higher transcriptional activities than that of 159 bp, suggesting that nucleotide from -159 to -309 nt upstream the translation initiation site harbors the main cis-acting elements.

433 MHz TPMS용 직각 스파이럴 구조 안테나 설계 및 제작 (Design and Fabrication of a Rectangular Spiral Type Antenna for 433 MHz)

  • 오승곤;안준오;김부균
    • 한국전자파학회논문지
    • /
    • 제23권6호
    • /
    • pp.752-755
    • /
    • 2012
  • 본 논문은 타이어 휠로 인한 전파의 감쇄를 최소화하기 위해 직각 스파이럴 형태의 TPMS용 송신 안테나를 설계하고 제작하였다. 설계된 안테나의 433 MHz 주파수에서의 $S_{11}$은 시뮬레이션 결과, -10 dB 대역폭이 23 MHz(427~450 MHz)가 확보되었으며, 설계된 안테나를 두께 0.3 mm인 황동 재질로 $5mm(W){\times}23mm(D){\times}10mm(H)$의 크기로 제작한 후 반사 손실을 측정한 결과, -10 dB 대역폭이 433 MHz${\pm}$10 MHz로 충분한 대역폭이 확보됨을 확인하였다. 제작된 안테나의 방사 전력은 휠에 미부착시 -44.21 dBm, 휠에 장착 시 -50.0 dBm으로 측정되었으며, 실제 데이터 송수신 테스트를 통해 실용화가 가능함을 확인할 수 있었다.

1.9 GHZ PCS 기지국용 선형 전력증폭기의 제작 (Implementation of Linear Power Amplifier with 1.9 GHz for PCS Basestation)

  • 김상기;방성일
    • 전기전자학회논문지
    • /
    • 제7권1호
    • /
    • pp.88-96
    • /
    • 2003
  • 본 논문에서는 미국내의 상용 PCS 서비스 대역인 $1.9GHz(1.93{\sim}1.99GHz)$대역에서 사용 가능한 선형 전력 증폭기를 설계 및 제작하였다. 실제로 제작한 선형 전력 증폭기는 출력이 25W이고 Feedforward선형화 기법을 사용하여 FCC가 규정한 혼변조 왜곡 특성을 만족하도록 하였다. 선형 전력 증폭기의 출력별로 측정한 결과 1W(30dBm)에서 25W(44dBm)까지 14dB의 측정구간에서 선형화에 의한 혼변조 왜곡은 최저 10.51dBc부터 최고 19.01dBc까지 개선되었고, 최종 출력에서의 IMD 레벨은 최저 64.84dBc에서 최고 68.17dBc로 각각 나타났다. 이러한 특성은 PCS 기지국의 상용제품으로 충분히 사용할 수 있을 것으로 기대된다.

  • PDF

Performance and Carcass Composition of Broilers under Heat Stress : I. The Effects of Dietary Energy and Protein

  • Al-Batshan, H.A.;Hussein, E.O.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권6호
    • /
    • pp.914-922
    • /
    • 1999
  • An experiment was conducted to determine the effects of dietary energy and protein on performance and carcass composition of broilers under heat stress during the growing period (3-6 weeks). A factorial arrangement of three levels of energy (3.0, 3.2 and 3.4 kcal/g), three levels of protein (18, 20 and 22%), an two rearing temperatures were used in this study. Groups of birds were kept under moderate temperature ($24{\pm}1^{\circ}C/24h$) or hot cycling temperature ($26-34^{\circ}C/6h$, $34{\pm}1^{\circ}C/12h$, and $34-26^{\circ}C/6h$). Body weight (BW), weight gain (WG), feed intake (FI), feed conversion (feed : gain) (FC), carcass weight (CW), carcass yield (YP), breast meat (BM), abdominal fat (AF), drumsticks (DS), and thighs (TH) percentages were determined at the end of the experiment. Hot cycling temperature significantly (p<0.05) decreased BW, WG, FI, CW, and BM, increased FC, YP, DS, and TH but did not affect AF. High energy significantly (p<0.05) increased BW, WG, CW, YP, AF, and TH, decreased FI and FC but did not affect BM or DS. This improvement was observed only under moderate temperature resulting in significant (p<0.05) energy by temperature interaction. High protein significantly (p<0.05) increased BW, WG, CW and BM, decreased AF but did not affect FI, FC, TP, DS, or TH. There were no significant protein by temperature interactions for any of the parameters tested except CW. It is concluded, under the conditions imposed in this experiment, that increasing dietary energy did not alleviate the depressing effect of heat stress while increasing dietary protein up to 22% improved the performance of broilers irrespective of rearing temperature.

HD-SDI 비디오 신호 전송을 위한 광 비디오 전송 장치 개발 (Development of Optical Video Device for HD-SDI Video Signal Transmission)

  • 이동렬
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.245-250
    • /
    • 2015
  • HD-SDI 비디오 신호 전송을 위한 광 비디오 전송 장치를 개발하였다. 광 송수신기는 입력전원 DC 5V로 동작하며, 감시 카메라 주위에 부착 가능하도록 작은 크기로 개발하였다. 광 송수신기는 내부에 별도의 전원 안정화 회로를 내장하여, 출력이 안정된 3.3V 전압을 내부의 다른 전자회로에 공급하도록 하였다. 광 송신기는 케이블드라이버, 레이저 다이오드 드라이버, 레이저 다이어드로 구성되며, 광수신기는 포토다이오드, 리미팅 앰프, 케이블 이퀄라이저로 구성하였다. 광 송신기는 파장 1.3.um, 광출력 -5 dBm, 송신속도 1.485Gbps였고, 광 수신기는 수신감도 -23dBm이었다. 이 장치로 HD-SDI 비디오 신호가 광섬유 30km 광섬유 전송 후에도 끊김 없이 전송됨을 확인하였다.

ILS 로컬라이저 시스템 분석 및 전력증폭기 설계 (System Analysis and Power Amplifier Design for ILS Localizer)

  • 김수경;구경헌
    • 한국항행학회논문지
    • /
    • 제28권1호
    • /
    • pp.116-122
    • /
    • 2024
  • 본 논문에서는 ILS (instrument landing system) 로컬라이저 전력증폭기의 변조도, 출력, 그리고 위상 변화량 규격의 요구성능을 도출하기 위하여, 시스템의 주요 성능 중에서 course structure와 course width를 연구하였다. Course structure의 편차 규격(± 5 uA)을 만족하기 위한 CSB (carrier with sideband) 증폭기의 변조신호 DDM (difference in depth of modulation) 편차 규격을 ± 1 uA(0.001 DDM)로 규격화하였다. CSB 30 W 전력증폭기를 설계하였고, 변조도 보상회로를 통하여 동작운용 출력범위(45 dBm ~ 35 dBm)에서 SDM (sum in depth of modulation)은 40% ± 0.1%, DDM은 ± 0.0005 DDM의 특성을 얻었다. 그리고 course width와 displacement sensitivity 규격에 대하여 시뮬레이션으로 분석하고, 가장 엄격한 규격인 운용개시 점검시에 적용되는 ± 0.1 ° 변화량을 적용하여, SBO (suppressed with sideband only) 증폭기의 출력변동은 ± 2 mW, 위상은 ± 3 ° 로 규격화하고 특성을 만족하였다. 출력과 온도에 따른 보상회로를 적용하여, 안정적인 변조지수, 출력, 그리고 위상 특성을 얻었다.