• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.179-185
• /
• 2019

In this paper, We purpose the basic data for the success of effective CPR using mirror in order to increase the quality of chest compression during CPR. The subject of this study was an experimental study based on a randomized crossover design of 28 people who completed the BLS Health Care Provider, and collected data were analyzed by SPSS Ver. 23.0 for Win statistics program. As the research methods, depth, speed, compression to relaxation ratio, arm angle and easiness during the chest compression were measured. Taken together, the results of this study showed that using a mirror-based chest compression method for chest compressions in adult CPR could make chest compressions easier, in addition, the quality of breast compression was improved by improving the posture of the rescuers, such as the average depth of compression, compression to relaxation ratio, and arm angle. However, it is necessary to confirm the feasibility of clinical application through additional studies on various environmental factors and job groups for mirror-based chest compression method.

• Journal of Chest Surgery
• /
• v.31 no.9
• /
• pp.827-836
• /
• 1998

Background: Effective cardiopulmonary resuscitation (CPR) should provide acceptable hemodynamics for the vital organs during cardiac arrest and early restoration of spontaneous circulation that guarantees long-term, neurologically intact survival. CPR using heart-lung bypass has been suggested as an option for that use. This study was designed to determine the effectiveness of standard CPR techniques, closed-vs. open-chest CPR, which could be used in the future study verifying the role of heart-lung bypass CPR. Material and Method: By using adult mongrel dogs, closed-chest CPR (CCCPR, n=4) and open-chest CPR (OCCPR, n=5) were compared with respects to hemodynamics, restoration of spontaneous circulation(ROSC), and survival. Ventricular fibrillation-cardiac arrest (VF-CA) was induced by electrical shock in all animals. After 4 minutes of cardiac arrest, basic life support (BLS) was applied for 15 minutes and followed by advanced life support (ALS). ALS was maintained until achi ving ROSC but not longer than 30 minutes regardless of the recovery. Resuscitation procedures in either group were standardized by adopting the protocol of American Heart Association. Result: Prearrest baseline hemodynamic data was not different between two groups. During resuscitation, substantially higher systolic pressure was maintained in OCCPR group than in CCCPR group (45$\pm$15 vs. 33$\pm$11 mmHg during BLS, 83$\pm$36 vs. 44$\pm$15 mmHg during ALS; p=NS). Mean pulmonary arterial pressure went up to the level of mean systemic arterial pressures in CCCPR group and to half of that in OCCPR group, and had kept higher in CCCPR group throughout CPR (32$\pm$10 vs. 22$\pm$4 mmHg during BLS and 32$\pm$15 vs. 24$\pm$10 mmHg during ALS; p=NS). ROSC was obtained in 4 of 5 dogs receiving open-chest CPR and 2 of 4 closed-chest CPR. Prolonged survival was noted in all dogs in OCCPR group (6 to 1440 hours) but not in CCPR group (p<.05). Conclusion: These findings indicate that open-chest CPR can be more effective t maintain hemodynamics during cardiac arrest and to obtain restoration of spontaneous circulation and survival. Further experiment will be designed to compare heart-lung bypass CPR with open-chest CPR.

• Journal of Advanced Technology Convergence
• /
• v.2 no.3
• /
• pp.59-66
• /
• 2023

The most important thing in digital transformation is SW technology. However, many companies are having difficulty securing SW technology and manpower. In particular, it is reported that the shortage of SW manpower will increase further. The government is carrying out manpower training policies and many support projects to resolve SW manpower supply and demand policies, but accurate predictions of demand and supply of the software industry are essential for these policies to be effectively established. Therefore, this study developed a simulation using a system dynamics methodology that can perform dynamic structural analysis to resolve the supply and demand imbalance in the software industry. System dynamics is appropriate to find the cause and policy alternatives from a dynamic perspective on the imbalance in manpower supply and demand in the software industry. In detail, the U.S. Bureau of Labor Statistics (BLS) methodology was used to develop a prediction model for manpower demand and supply in the software industry, and scenario analysis was performed to derive policy implications.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.4
• /
• pp.736-760
• /
• 2011

The importance of new renewable energy is emphasized not only new growth engine but also the key solution for the exhaustion problem of fossil energy and environment problem. For the steady growth of new renewable energy industry, securing related labor force is an essential factor. In this study, the status on labor force of new renewable energy industry was identified and forecasted the labor force demand of new renewable energy in 2015 by reflecting the industrial growth outlook on the new renewable energy. For the quantitative analysis methodology, the stock approach of Bureau of Labor Statistics (BLS) of the United States was applied. Also by performing survey on the experts, the opinions of experts on supply and demand of new renewable energy labor force or worker training programs have been gathered. As a result of study, it has been analyzed that nearly 20% annual growth rate will be shown as the labor force demand in the field of new renewable energy industry increases from 14,100 people in 2010 to 33,200 people in 2015. In the survey on experts, we could find that a plan for supplying labor force must be prepared promptly in order to accomplish new renewable energy supply objectives and industrial growth objectives by our country in the future as the supply of new renewable energy labor force is currently insufficient. Also, it has been analyzed that the effort for deciding the proper new renewable energy labor force training program standard will be necessary. This study result could be used as a material of labor force training plan for the steady growth of new renewable energy industry in the future.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.118-118
• /
• 1999

CVD방법에 의한 TiN 박막 형성에 있어서 ICP-CVD 방법이 대두되고 있다. 이것은 precursor에 대한 radical 형성, 식각된 패턴에서 양 벽의 self-shadowing 효과, 낮은 tress등으로 dense 한 박막을 얻을 수 있기 때문이다. TiN 박막은 Si 기판의 온도를 상온에서 50$0^{\circ}C$까지 유지하면서 TEMAT의 유량을 5-20sccm으로 변화시키면서 증착하였다. 증착 후 TiN 박막의 결정화에 따른 열처리는 Ar과 N2-가스분위기에서 in-situ로 증착하였다. 증착 후 TiN 박막증착 조건수립에 따른 플라즈마 특성진단은 전자의 온도와 밀도, 평균 전자밀도, 이온 에너지 분포, radical 분포, negative 이온분포 등으로 측정하였다. 플라즈마 변수에 따른 TiN 박막의 결정성과 상 변화는 XRD로 분석하였고, 조성비 및 TiN 박막의 원소화학적 상태, 결합에너지, 각 상에 따른 결합 에너지 천이정도, 초기 형성과정 및 반응기구 등은 RBS와 XPS로 조사하였다. TiN 박막의 표면상태, morphology 거칠기, TiN/Si(100)구조에서 계면상태 등은 SEM, AFM, 그리고 HRTEM으로 분석하였다. TiN 구조 박막의 비저항, carrier concentration 그리고 mobility 측정은 박막의 표면이 균일하고 bls-홀이 없는 것으로 하여 4-point probe 방법으로 측정하였다. 이들 분석으로부터 ICP-CVD 방법에 의하여 형성된 TiN 박막이 초고집적 반도체 소자의 contact barrier layer로서의 적용 가능성을 평가하였다.

• Journal of the Korean Magnetics Society
• /
• v.18 no.4
• /
• pp.147-153
• /
• 2008

It has been well-known that the Fe/GaAs heterostructure has a small lattice mismatch of 1.4% between Fe and GaAs, and the Fe layer is grown epitaxially on the the GaAs substrate. There are rich physics are observed in the GaAs/Fe interface, and the spininjection is actively studied due to its potential applications for spintronics devices. We fabricated Fe wedge layer in the thickness range $0{\sim}3.4$ nm on the GaAs(100) surface with 5-nm thick Au capping layer. The magnetic anisotropy of the Fe/GaAs system was investigated by employing Brillouin light scattering(BLS) measurements in this study. The spin wave excitation of Fe layer was studied as the function of intensity and the in-plane angle of external magnetic field, and thickness of Fe layer. Also these various dependences were analyzed with analytic expression of spin wave surface mode in order to determine the magnetic anisotropies. It has been found that the GaAs/Fe/Au system has additional uniaxial magnetic anisotropy, while the bulk Fe has biaxial anisotropy. The uniaxial anisotropy shows increasing dependency respected to decreasing thickness of Fe layer while biaxial anisotropy is reduced with Fe film thickness. This result allows the analysis that the uniaxial anisotropy is originated from interface between GaAs surface and Fe layer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.972-980
• /
• 2022

The butterfly species recognition technology based on machine learning using images has the effect of reducing a lot of time and cost of those involved in the related field to understand the diversity, number, and habitat distribution of butterfly species. In order to improve the accuracy and time efficiency of butterfly species classification, various features used as the inputs of machine learning models have been studied. Among them, branch length similarity(BLS) entropy or color intensity entropy methods using the concept of entropy showed higher accuracy and shorter learning time than other features such as Fourier transform or wavelet. This paper proposes a feature extraction algorithm using RGB color intensity entropy for butterfly color images. In addition, we develop butterfly recognition systems that combines the proposed feature extraction method with representative ensemble models and evaluate their performance.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.131-138
• /
• 2019

Carbonylated proteins (CPs) are synthesized by the chemical reaction of basic amino acid residues in proteins with aldehyde compounds yielded by lipid peroxidation. CPs are excited by a range of light from UVA to blue light, and resulted in the generation of superoxide anion radicals ($^{\cdot}O_2{^-}$) by photosensitizing reaction. Then, they CPs induce new protein carbonylation in stratum corneum through ROS generation. Furthermore, the superoxide anion radicals produce CPs in the stratum corneum (SC) through lipid peroxidation and finally affects skin conditions including color and moisture functions. The purpose of this study was to investigate the relationship between the production of stratum corneum carbonylated protein (SCCP) and the skin elasticity. 46 healthy female Koream at the ages of 30 ~ 50 years old were participated in this study for 8 weeks. The skin test was experiment conducted into two groups; placebo group (N = 23) used cream that did not contain active ingredients, and the other group (N = 23) used cream containing the elasticity improving ingredients. Test areas were the crow 's feet and the cheek. Various non-invasive methods were carried out to measure biophysical parameters on human skin indicating that dermis density and skin wrinkle were measured by using DUB scanner and Primos premium, respectively. Skin elasticity were measured using dermal torque meter (DTM310) and balistometer (BLS780). SCCP was assessed in a simple and non-invasive method using skin surface biopsy on the cheek of the subject. The amount of SCCP was determined using image analysis. All measurements were taken at 0, 4 and 8 8week. Results revealed that the amount of CP in SC was reduced when the skin wrinkle and skin elasticity related parameters were improved. This indicates that the correlation between the elasticity improvement and the amount of CP can be used as a anti-aging indicator and applicable to the skin clinical test for the measurement of skin aging in the future.

• Journal of Naturopathy
• /
• v.9 no.1
• /
• pp.22-26
• /
• 2020

Purposes: The purposes of this study were to investigate the relationship between the standing position of the subject and the normal standing position(NSP) and the straight standing position(SSP) and to investigate the possibility of different body shape test results depending on the status of the image inspection apparatus. Methods: The images of the NSP and SSP were compared with each other by body line BLS system. Results: At the time of examination, the position of the camera was captured at a position 2.3 m vertically from the posterior position 45 cm behind the subject. This is a privacy protection method for covering the breast of the subject. Results: The physiological characteristics of the anatomical position of the body align image test are the living body. NSP and SSP tests showed different shapes of the pelvis AS(antero-supero) and pelvis rotation in the transverse plane. Shoulder and arm displacement was observed in the trunk extension image capture. Conclusions: In the body alignment test, the pelvis position test images of NSP and SSP are evaluated differently for pelvis rotation, AS, and PS. At the extension position of the trunk, a test of the maximal extension range showed that the left and right shortening of the shoulder anterior muscles could be observed. Inducing and testing the trunk extension is also useful.

• Korea journal of population studies
• /
• v.29 no.3
• /
• pp.51-72
• /
• 2006

In Korea, most studies have used the conventional Wolfbein and Wool method, which cannot be applied to women's work-life table because of bimodality and/or M curve of female labor force participation. The increment/decrement work-life table method, however, is equally applicable to both men and women, but requires individual data on employment transition. This paper demonstrates that the Garfinkle-Pollard method is the same as the increment/decrement work-life table method developed by Hoem, Schoen and Woodrow and adopted by BLS. The merit of Garfinkle-Pollard method is to produce work-life table using labor force participation rate without individual employment transition. This paper applies the Garfinkle-Pollard methods to the estimation and projection of work-life of Korean labor force for the period of 2000-2050, using the abridged life tables provided by Korean National Statistical Office and a projection of labor force participation rates. The work-life expectancy at 65 is 5.8 years for men and 4.1 years for women in 2000, and it increased to 7.7 years for men and 5.1 years in 2050. However, differences in work-life expectancy are found depending on the data processing of elderly labor force participation and mortality assumption. Detailed data on elderly labor force participation and further study on future mortality are required to estimate and project more accurate work-life expectancy.