• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1089-1097
• /
• 2016

It is well-known that, if additional information other than a plaintext-ciphertext pair is available, breaking the RSA cryptosystem may be much easier than factorizing the RSA modulus. For example, Coppersmith showed that, given the 1/2 fraction of the least or most significant bits of one of two RSA primes, the RSA modulus can be factorized in a polynomial time. More recently, Henecka et. al showed that the RSA private key of the form (p, q, d, $d_p$, $d_q$) can efficiently be recovered whenever the bits of the private key are erroneous with error rate less than 23.7%. It is notable that their algorithm is based on counting the matching bits between the candidate key bit string and the given decayed RSA private key bit string. And, extending the algorithm, this paper proposes a new RSA private key recovery algorithm using a generalized probabilistic measure for measuring the consistency between the candidate key bits and the given decayed RSA private key bits.

• Wind and Structures
• /
• v.35 no.1
• /
• pp.55-66
• /
• 2022

Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many approaches such as modification of the external geometry of structures have been investigated to mitigate wind-induced load. One such proven geometric modification involved the rounding of sharp corners. In this work, we systematically analyze the impact of rounded corner radii on the reducing the flow-induced loading on a square cylinder. We perform 3-Dimensional (3D) simulations for high Reynolds number flows (Re=1 × 105) which are more likely to be encountered in practical applications. An Improved Delayed Detached Eddy Simulation (IDDES) method capable of capturing flow accurately at large Reynolds numbers is employed in this study. The IDDES formulation uses a k-ω Shear Stress Transport (SST) model for near-wall modelling that prevents mesh-induced separation of the boundary layer. The effects of these corner modifications are analyzed in terms of the resulting variations in the mean and fluctuating components of the aerodynamic forces compared to a square cylinder with no geometric changes. Plots of the angular distribution of the mean and fluctuating coefficient of pressure along the square cylinder's surface illustrate the effects of corner modifications on the different parts of the cylinder. The windward corner's separation angle was observed to decrease with an increase in radius, resulting in a narrower and longer recirculation region. Furthermore, with an increase in radius, a reduction in the fluctuating lift, mean drag, and fluctuating drag coefficients has been observed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.346-349
• /
• 2011

In this paper, we design a perceptually invisible dot pattern layout and its recognition scheme, and we apply the recognition scheme into a smart self learning aid for interactive learning aid. To increase maximum information capacity and also increase robustness to the noises, we design a ECC (error correcting code) based dot pattern with directional vector indicator. To make a smart self-learning aid, we embed the micro dot pattern (20 information bit + 15 ECC bits + 9 layout information bit) using K ink (CMYK) and extract the dot pattern using IR (infrared) LED and IR filter based camera, which is embedded in the smart pen. The reason we use K ink is that K ink is a carbon based ink in nature, and carbon is easily recognized with IR even without light. After acquiring IR camera images for the dot patterns, we perform layout adjustment using the 9 layout information bit, and extract 20 information bits from 35 data bits which is composed of 20 information bits and 15 ECC bits. To embed and extract information bits, we use topology based dot pattern recognition scheme which is robust to geometric distortion which is very usual in camera based recognition scheme. Topology based pattern recognition traces next information bit symbols using topological distance measurement from the pivot information bit. We implemented and experimented with sample patterns, and it shows that we can achieve almost 99% recognition for our embedding patterns.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.183-191
• /
• 2010

Unique and invariant biometric characteristics have been used for secure user authentication. Storing original biometric data is not acceptable due to privacy and security concerns of biometric technology. In order to enhance the security of the biometric data, the cancelable biometrics was introduced. Using revocable and non-invertible transformation, the cancelable biometrics can provide a way of more secure biometric authentication. In this paper, we present a new cancelable bits extraction method for the facial data. For the feature extraction, the Subpattern-based Principle Component Analysis (PCA) is adopted. The Subpattern-based PCA divides a whole image into a set of partitioned subpatterns and extracts principle components from each subpattern area. The feature extracted by using Subpattern-based PCA is discretized with a helper data based method. The elements of the obtained bits are evaluated and ordered according to a measure based on the fisher criterion. Finally, the most discriminative bits are chosen as the biometric bits string and used for authentication of each identity. Even if the generated bits string is compromised, new bits string can be generated simply by changing the helper data. Because, the helper data utilizes partial information of the feature, the proposed method does not reveal privacy sensitive biometric information of the user. For a security evaluation of the proposed method, a scenario in which the helper is compromised by an adversary is also considered.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.937-940
• /
• 1993

A new hardware architecture achieves high speed, high precision fuzzy inference capabilities while maintaining Flexibility on par with software approaches. This flexibility allows unmodified, uncompromised porting of fuzzy system designs into hardware. The architecture is also scalable and offers data resolutions from 8 bits to 32 bits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.532-538
• /
• 2003

In this paper we have investigated a novel approach applying low-density parity-check coding to a COFDM-CDMA system, which operates in a multi-path fading mobile channel. Developed as a linear-block channel coder, the LDPC code is known for a superior signal reception capability in AWGN and/or flat fading channels with respect to increased encoding rates, however, its performance degrades when the communication channel becomes multi-path fading. For a typical multi-path fading mobile channel with a SNR of 16㏈ or lower. in order to obtain a BER lower than 1 out of 10000, the LDPC code with encoding rates below 1:3 requires not only the inherent parity check information but also the piloting information for refreshing front-end equalizer taps of COFDM-CDMA, periodically. For instance, while the 1:3-rate LDPC coded transmission symbol is consisted of data bits and parity-check bits in 1 to 3 proportion, on the other hand, in the proposed method the same rate LDPC transmission symbol contains data bits, parity check bits, and pilot bits in 1 to 2 to 1 proportion, respectively. The included pilot bits are effective not only for channel estimation and channel equalization but for symbol decoding by assisting the parity-check bits, hence, improving SNR vs BER performance over the conventional 1:3-rate LDPC code. The proposed system performance has been verified using computer simulations in multi-path, Rayleigh fading channels, and the results show us that the proposed method out-performs the general LDPC channel coding methods in terms of SNR vs BER measurements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2081-2093
• /
• 1994

In this study, we design and implement 64 QAM demodulator which has 155 Mbps, first level of CCITT G707 SDH(Synchronous Digital Hierachy) for STM 1 signal transmission. Carrier recovery which effects the demodulator performance uses decision feedback carrier using 8 bits A/D converter. Also, PSF(Pulse Shaping Filter) is 7 order elliptic filter. Carrier recovery circuit is designed and implemented digital type which use high 3 bits of 8 bits conversion data as data and the order low bits as error data and hybrid type which use VCO and analog integrator. Therefore we obtain stable performance recovery.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.749-756
• /
• 2011

This paper propose the rule of coding for the characters and symbol, etc which are used in computer, information devices, etc. When they use the rule of coding, they may improve the efficiency of transmission in data communications by reducing the number of scrambling during the line coding in the coder in the transmitter. The paper considered the codes of two bytes(16 bits) of 4bits column ${\times}$ 4bits rows. In the paper, we applied the code system of Roman characters in KS X 1001.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1895-1902
• /
• 2011

The soft-decision e-BCH decoding algorithm based on the Chase algorithm is adopted in DVB-RCS NG systems. For implementation, it is necessary to decide the number of optimal quantization bits when soft-decision e-BCH decoding algorithm is processed. Also, the performance must be satisfied. Therefore, in this paper, when the soft-decision e-BCH decoder is implemented, we select the number of optimal quantization bits using BER performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.679-684
• /
• 1994

Progressive transmission using optimum bit-ordering of discrete cosine transform(DCT) coded image is proposed to reconstruct a better image in a few bits among all the coded bits at the receiver. It is to transmit the bit gradually to reduce the distrotion of the reconstructed image most by transmitting one more bit. To do this, the power transfer factor(PTF) which is the squared value of difference between the reconstruction level of embedded quantizer and another reconstruction level made by transmitting one more bit is defined. And then, the transmission order of bits is obtained by sorting the PTFs of the coded bits. As a results, the proposed method can reconstruct image having less distortion and better quality at the same bit rate than the conventional zig-zag scan.