• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.41-59
• /
• 2022

The timely procurement of military supplies is essential to maintain the military's operational capabilities, and contract work is the first step toward timely procurement. In addition, rapid signing of a contract enables consumers to set a leisurely delivery date and increases the possibility of budget execution, so it is essential to improve the contract process to prevent early execution of the budget and transfer or disuse. Recently, research using big data has been actively conducted in various fields, and process analysis using big data and process mining, an improvement technique, are also widely used in the private sector. However, the analysis of contract work in the military is limited to the level of individual analysis such as identifying the cause of each problem case of budget transfer and disuse contracts using the experience and fragmentary information of the person in charge. In order to improve the contract process, this study analyzed using the process mining technique with data on a total of 560 contract tasks directly contracted by the Department of Finance of the Air Force Logistics Command for about one year from November 2019. Process maps were derived by synthesizing distributed data, and process flow, execution time analysis, bottleneck analysis, and additional detailed analysis were conducted. As a result of the analysis, it was found that review/modification occurred repeatedly after request in a number of contracts. Repeated reviews/modifications have a significant impact on the delay in the number of days to complete the cost calculation, which has also been clearly revealed through bottleneck visualization. Review/modification occurs in more than 60% of the top 5 departments with many contract requests, and it usually occurs in the first half of the year when requests are concentrated, which means that a thorough review is required before requesting contracts from the required departments. In addition, the contract work of the Department of Finance was carried out in accordance with the procedures according to laws and regulations, but it was found that it was necessary to adjust the order of some tasks. This study is the first case of using process mining for the analysis of contract work in the military. Based on this, if further research is conducted to apply process mining to various tasks in the military, it is expected that the efficiency of various tasks can be derived.

• Journal of Korea Port Economic Association
• /
• v.39 no.4
• /
• pp.1-21
• /
• 2023

This study analyzed workers' residence and home-based work(HBW) trip by utilizing data from mobile carrier base stations of Gwangyang Port and terminal workers. In the past, research on port-related traffic or trip patterns mainly focused on cargo-based movement patterns for estimating cargo volume and port facilities, but this study analyzed trip patterns for workers in Gwangyang Port ports and related industries. As a result of the analysis, the average number of regular workers in the port hinterland Gwangyang Port was 1,295 per month, and the residence of workers was analyzed in Gwangyang City (66.1%)>Suncheon City (26.6%)>Yeosu City (3.1%). The average number of temporary workers in the hinterland was 2,645 per month, and Gwangyang City (45.8%)>Suncheon City (20.1%)>Yeosu City (5.7%). Next, the average number of regular workers at Gwangyang Port terminals was 753 per month, and Gwangyang City (66.1%)>Suncheon City (28.9%)>Yeosu City (3.3%) was analyzed. The average number of temporary workers at Gwangyang Port terminals was 1,893 per month, and Gwangyang City (50.8%)>Suncheon City (19.7%)>Yeosu City (9.8%). This study is expected to calculate the number of workers based on individual traffic using actual mobile carrier data to estimate the actual number of workers if the workplace address and actual work place are different, such as in port-related industries. This study is the first to be conducted on workers at Gwangyang Port. It is expected to be used as basic data for settlement conditions and urban planning, as well as transportation policies for port workers, by identifying the population coming from areas other than Gwangyang, where Gwangyang Port is located.

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.249-269
• /
• 2020

Recently, as the online market has matured, it is facing many problems to prevent the growth. The most common problem is the homogenization of online products, which fails to increase the number of customers any more. Moreover, although the portion of the online market has increased significantly, it now becomes essential to expand offline for further development. In response, many online firms have recently sought to expand their businesses and marketing channels by securing offline spaces that can complement the limitations of online platforms, on top of their existing advantages of online channels. Based on their competitive advantage in terms of analyzing large volumes of customer data utilizing information technologies (e.g., big data and artificial intelligence), they are reinforcing their offline influence as well through this online for offline (O4O) business model. On the other hand, most of the existing research has primarily focused on online to offline (O2O) business model, and there is still a lack of research on O4O business models, which have been actively attempted in various industrial fields in recent years. Since a few of O4O-related studies have been conducted only in an experience marketing setting following a case study method, it is critical to conduct an empirical study on O4O selection attributes and their impact on customer satisfaction and loyalty. Therefore, focusing on China's representative O4O business model, 'Fresh Hema,' this study attempts to identify some key selection attributes specialized for O4O services from the customers' viewpoint and examine the impact of these attributes on customer satisfaction and loyalty. The results of the structural equation modeling (SEM) with 300 O4O (Fresh Hema) experienced customers, reveal that, out of seven O4O selection attributes, four (mobile app quality, mobile payment, product quality, and store facilities) have an impact on customer satisfaction, which also leads to customer loyalty (reuse intention, recommendation intention, and brand attachment). This study would help managers in an O4O area well adapt to rapidly changing customer needs and provide them with some guidelines for enhancing both customer satisfaction and loyalty by allocating more resources to more significant selection attributes, rather than less significant ones.

• Progress in Medical Physics
• /
• v.25 no.2
• /
• pp.110-115
• /
• 2014

To compare 2 beam arrangements, circumferential equally angles (EA) beams or partially angles (PA) beams for stereotactic body radiation therapy (SBRT) of primary lung cancer for intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) delivery techniques with respect to target, ipsilateral lung, contralateral lung, and organs-at-risk (OAR) dose-volume metrics, as well as treatment delivery efficiency. Data from 12 patients, four treatment plans were generated per data sets ($IMRT_{EA}$, $IMRT_{PA}$, $VMAT_{EA}$, $VMAT_{PA}$). The prescribed dose (PD) was 60 Gy in 4 fractions to 95% of the planning target volume (PTV) for a 6-MV photon beam. When compared with the IMRT and VMAT treatment plan for 2 beams, conformity index, homogeneity index, high dose spillage, D2 cm (Dmax at a distance ${\geq}2cm$ beyond the PTV), R50 (ratio of volume circumscribed by the 50% isodose line and the PTV), resulted in similar. But Dmax of the Organ at risk (OAR), spinal cord, trachea, resulted in differ between four treatment plans. Especially $HDS_{location}$ showed big difference in 21.63% vs. 26.46%.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.64-73
• /
• 2010

This research collected some multi-image information of Nakdong River Estuary Eulsukdo area in last 30 years, which are used as the basis information in running the qualitative analysis of the topography relief's deformation. First, to obtain the data, this research carried out a field survey and GCP measurement, then classified and collected the image information by analog and digital image. The acquired images which have passed a high-precise scan process and geometric correction is manufactured by Ortho Mosaic image, then divided them into 9 sections time period classification before we run a qualitative analysis. In late of 1980's there are many changes of environmental topography deformation of the Eulsukdo area which caused by large scale building constructions, appeared to be known through this research. And then in late of 1990's, we organized the wild cultivated lands, started the wetland restoration of the artificial ecology, in 2000's we are able to know the existence of topograph relief change which caused by big scale of bridge construction. Hereafter, in this quick process of the environmental and topographical change of this area caused by the 4 major rivers restoration project, the analysis results of this experiment are expected to be something applicable as important basic data.

• Journal of the Korean Dietetic Association
• /
• v.3 no.2
• /
• pp.123-140
• /
• 1997

The purpose of this study were to assess main management components that can lead to successful university foodservice operations. Specifically, it was intended to develop the tool which assesses the service quality, management, to assess the difference between customer importance from and perceptions of service quality, to compare management perceptions of customer importances with actual service delivery, and to identify internal problems which affect service quality with the use of gap model. Three types of questionnaires were developed and implemented for customers, foodservice personals and foodservice manager. Assessment tools were developed based on the literature review, SERVQUAL, GAP model, and the pilot study. Through the validity and reliability test, the questionnaires were revised. Questionnaires were distributed to 900 university students, 207 foodservice personnels, and 54 foodservice manager respectively. 831 university students, 177 foodservice personnels, and 48 foodservice manager were responded with a response rate of 92.3%, 85.5%, and 88.8% respectively. Statistical data analysis was completed using the SPSS programs for descriptive analysis, ANOVA. and SNK test. The results of this study can be summarized as follows : 1. In quality service management components, 31 quality service attributes were categorized and named into primary quality, secondary quality, hygiene, empathy, tangibles, reliability, responsiveness, and price by the factor analysis. 2. Importance mean score of customers was 4.02 out of 5, but perception mean score of customers was 2.55. So there was a relative big gap(1.47) between importance and perception scores, especially in three dimensions of responsiveness, primary quality, and hygiene. 3. It showed that customers' mean scores of perceived service quality by dimensions were the following order : price > reliability > secondary quality > hygiene > tangibles > primary quality > responsiveness > empathy. And the perception mean score of rented(2.59) or contracted(2.58) management was significantly higher than that of self-operated(2.48). 4. Customers' importances mean score which internal customers recognize was 4.23 out of 5, but service delivery mean score was 3.85. So there was a little gap(0.39) between management perceptions of customer importances and actual service delivery. 5. In gap model, SERVQUAL score showed -1.47, Gap 1 positive 0.15, gap 2 negative 0.61, and gap 3 was positive 0.19. 6. The internal problems were as follows : (1) The managers of University foodservice perceived well enough the customers' expectation value but their management competency was lacked in terms of responding customer needs, (2) The foodservice staff perceived service performance more highly than service quality specifications.

• Journal of Technologic Dentistry
• /
• v.37 no.4
• /
• pp.271-284
• /
• 2015

Purpose: The purpose of this study was to examine the usage of CAD/CAM, which is one of dental technologist duties, in an effort to look for any possible changes in the usage of CAD/CAM. It's specifically meant to compare the results of this study with those of Lee Jong-do, Park Kwang-Sig(2011)'s study in March, 2011, to determine if there were any changes over the past four years. The selected variables that were investigated were the ownership of CAD/CAM, awareness of it, the route of acquiring the first information on it, the merits and demerits of its usage, usage experience and educational experience about it. Methods: An online survey was conducted on the dental technologists who worked in urban communities including metropolitan cities to find out the usage of CAD/CAM in 2015 from July 15 to 31, 2015, after existing questionnaire items were modified. The collected data were analyzed by IBM SPSS statistics 22.0, and statistical data on frequency, percentage, mean and standard deviation for each item were obtained. To figure out the characteristics of the subjects and the relationship between their occupational characteristics and the usage of CAD/CAM, crosstabs, independent-samples t-test and one-way ANOVA were utilized. As for the usage of CAD/CAM in 2011, the results of Lee Jong-do, Park Kwang-Sig(2011)'s study were selected, and then a comparative analysis was made. The level of significance was all set at .05. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: As a result of analyzing the usage of CAD/CAM that was one of dental technologist duties, there was a great increase in the ownership of CAD/CAM in their workplaces from 2.4 percent in 2011 to 71.7 percent in 2015, and there was an improvement in awareness about it and the necessity of its usage as well. In 2011, the Internet and mass media were the most common route that they got to know about it. They had a strong tendency to acquire related knowledge through education in 2015, and there were some changes in the products that they used or preferred. In both years, the great merit of CAD/CAM was the simplified manufacturing process of restoration, and it had another great advantages in 2015 such as the improved quality of restoration or improved environments for dental technology. Concerning disadvantages, high price was a big problem in 2011. In 2015, not only price but the burden of material costs, frequent breakdown, poor demand among dental clinics and a lack of CAD/CAM professionals were pointed out a lot. In the future, this researcher intends to make research to seek ways of improving CAD/CAM professionals. Conclusion: There was more awareness of CAD/CAM in 2015 than in 2011 when the changes in awareness of it were analyzed, and the finding suggest the necessity of sustained education and concern.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.1
• /
• pp.1-14
• /
• 2020

Various policies and studies regarding use of PBSS (Public Bike Sharing System) and Programs (PBSP) have been conducted worldwide as the number systems or programs has increased. Although various phenomena and demands have been generated by the use of PBSS in everyday life, the majority of research and the policies in South Korea have been implemented focused on commuting life. The purpose of this study aimed to understand various PBSS demands using PBSS usage data in 2018 in the Yeouido districts through classifying usage patterns and analyzing features. The rental stations were classified into three types based on weekday/weekend usage rates. The usage of Yeouido's PBSS accounted for 4.3% of the total usage in Seoul Metropolitan City, while the number of PBSS rental stations accounted for 2% of all rental stations in the Seoul urban areas. Rental stations with a higher weekday utilization rates showed high utilization rates in all four seasons and were mainly distributed in work and residential areas. Other stations showed a concentrated usage pattern in spring (April-May) and autumn (September-October) seasons, and their locations were close to the entrance of nearby parks. Besides, renting and returning were often concentrated at certain rental stations for high weekend utilization as compared to the pattern of high weekday usage. Therefore, PBSS management and programs should be operated to reflect various usage demands rather than uniform PBSS operations. The result of this study is meaningful to provide basic data for effective PBSS operation by monitoring the demand for PBSS usage in spatio-temporal terms.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.5
• /
• pp.317-326
• /
• 2002

This study was conducted to determine the optimum planting dates and density of one year old Bupleurum falcatum L. to improve its productivity and quality. Two cultivars of B. falcatum, originated from Jeongseon, Korea and Mishima, Japan were used. Some of the results obtained are as follows : Jeongseon cultivar showed less stem branches and shoot weight compared to Mishima. However, Jeongseon cultivar showed tall plant height, high root fresh and dry weight, and high levels of saikosaponin, but low saikosaponin content than that of Mishima. Both cultivars seeded on March 20 had long main root, big stem diameter, few stem branch, and high saikosaponin c content compared to those of late seeded one, April 30. Growth characteristics such as plant height, stem diameter, stem branch number, shoot weight, root diameter, root fresh and dry weight, and root branch number were increased in a low planting $density(30\;{\times}\;15cm)$, but the content of saikosaponin was not affected by planting density. Jeongseon and Mishima cultivars seeded on April 10 with $30\;{\times}\;15cm$ planting density and April 30 with $30\;{\times}\;10cm$ planting density contained the highest total saikosaponin levels, respectively. However, average root dry weight were not affected by planting time or density in both Bupleurum cultivars.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.57-61
• /
• 2010

Objective: Second primary malignancy (SPM) that occur in various period and region are important factors that deteriorate long-term survival rate in patients who recovered from oral cancer. Researches such as chemoprevention are being tried to reduce occurrence of SPMs. Only if analysis of clinical features of patients who develop SPM such as period, region and factors precedes, adequate prevention and treatment of SPM is possible. But, there are few researches about clinical features of SPMs that have primary lesion in oral cavity. In this study, we analysis that occurrence rates, regions that happen, risk factors and effect to survival rates of 2nd primary malignancies in oral cancer patients. From this survey, we willing to collect basic data for prevention and early diagnosis of SPMs. Methods: The medical records of 139 patients of oral oncology clinic of National Cancer Center who had up to 2-years follow up records after surgical or radiological treatment due to squamus cell carcinoma of oral cavity were reviewed. In these patients, survey of occurrence rate of SPMs, duration, survival rate and risk factors about occurrence of SPMs such as history of smoking, body mass index, age, sex, stage of primary lesion and history of radiologic treatment were achieved. Results: There are 15 patients who developed SPM in 139 cases. The actual occurrence rate of SPM was 10.79% and SPM were more likely to occur in male patients with 11 male Vs 4 female patients. Median age of these patient is 61.47 within 32 to 74 range. The regions that develop SPM are oral cavities (2 cases), stomach (4 cases), esophagus (2 cases), lung (2 cases) and others (1 case each breast, larynx, cervix, liver and kidney). In addition, metachronous cancers were 11 cases which happened more common than 4cases of synchronous cancers. Surveys of risk factors that relate to development of SPMs, such as sex, age, history of radiologic treatment, body mass index, history of smoking and stage of primary disease were done. Among them, factor of sex is only appear statistically significant (P=0.001), but rest are not significant in statistically. Conclusion: Occurrence rates of SPMs were reported from 10% to 20% by precede study. In this study, occurrence rate of SPMs is 10.79% that is similar to results of precede research. In comparison of 5-yr survival rates of groups that develop SPMs or not, there is statistically significance between two groups. Present treatment modalities of SPMs are surgical operation, radiotherapy, chemotherapy and combination of these modalities. In choosing the treatment modality, we must consider the first treatment modality, region of primary disease, region of SPMs and general conditions of patient. Because development of SPMs have big effect on prognosis, prevention of SPMs must regard to important objective of treatments in patients of SCCa in oral cavity.