• Journal of the Korean Society of Combustion
• /
• v.14 no.4
• /
• pp.33-40
• /
• 2009

Waste Thermal Pyrolysis Melting process was proposed and has been studied in order to prevent air pollution by dioxin and fly ash generated from combustion process for disposal of waste. In this study, applicability as the fuel of diffusion burner of synthesis gas formed from Waste Thermal Pyrolysis process was addressed. Results showed that there is no big difference in the flame shape between MNDF and SNDF, and lift off was detected in MIDF but flame is more stable in SIDF which contains hydrogen with high combustion velocity as flow rate in first nozzle is increased. And radiation heat flux in inverse diffusion flame of synthesis gas was found to be more by 1.5 times than that in inverse diffusion flame of methane because of higher mole fraction of $CO_2$ with high emissivity in product gas.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.2
• /
• pp.49-63
• /
• 1998

The purpose of this study is to study real body size and ideal body shape by considering the degree of satisfaction of body part and understanding body size by the degree of leanness/obesity. The subjects in this study were 420 males from 18 to 25 years old. Body measurements and surveys were taken and analyzed by mean, standard variation, correlation analysis, regression analysis, crosstabulation analysis, cluster analysis, one-way ANOVA, and Duncan's Test. The results of analyses indicate that the subjects tended to be satisfied with thick chest and upper limbs, wide shoulder width, and preferred to be tall and have big hands and feet. By cluster analysis of 19 variables, the subjects were divided into 4 groups, each consisting 41, 138, 134, and 47 males. Because the 19 variables were body measurements transformed to eliminate the body size factor, this classification was considered to express how lean or how obese a human body appears. The results of one way ANOVA and Duncan's Test indicate that, according to the degree of leanness/obesity from Group I (lean tendency) to Group IV(obese tendency), characteristics of the body shape changed as follows; height became lower, limbs became shorter, trunk and limbs became thicker and weight became heavier. Also it showed that Group IV were most satisfied with chest girth, upper limb girth and shoulder width and Group I with height, hip girth and waist girth.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.245-272
• /
• 2004

This study is focused on the cases that Korean hotels stepped into international airports, public facilities, and successfully solved the contract related disputes by using arbitration in accordance with arbitration law. This case study on arbitration derives the hotel management strategy points as follow: 1. It must be a good chance for a famed hotel to step into international airports that have big publication effect. The feasibility study focused on marketing feasibility rather than finance feasibility may, however, not be good. 2. Written contract is required in entering into a contract with government organizations. However, oral contract still exists. 3. If the contract is made to always pay the higher amount between annual minimal guarantee and sales rate in expenses of store using charge, such contract shall cause very hard sales environment from the initial stage of the contract. 4. The airports have made optional contracts for national service. Such optional contracts are, however, not free from public criticism. 5. This case study is the first case study on arbitration applied to hotels. This study shall be, therefore, frequently referred to in setting a management strategy of hotels that want to run restaurants in another facility outside themselves.

• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.217-240
• /
• 2013

The investment environment in Korea and U.S. dramatically changed since Korea-US FTA. The key reasons for this successful change were liberalization and strengthened protection of investment along with trade liberalization which also brought investment market expansion. As the result of trade-diversion effect, investments between two countries have been enormously increased. Through a FTA with the big economy like US, Korea's FTA network has been largely expanded. Korea further needs to utilize this outcome when competing with other countries in investment markets.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.4 s.316
• /
• pp.21-27
• /
• 2007

Recently cluster system built from personal computers and network devices are easily and economically constructed. Rapid technological change discloses new processors on the market yielding cluster systems heterogeneity. A parallel system in heterogeneous environment needs work managers for utilizing the full power of the heterogeneous cluster system. In this paper, we compare MPI and Cilk in a heterogeneous cluster system in terms of performance and code complexity. Experimental results show that Cilk is better than MPI with small sizes of data transfers while MPI outperforms Cilk with big sizes of data transfers. Also, We find that Cilk requires less programming efforts to write a parallel program.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.49-56
• /
• 2005

Recently, very-early strength latex-modified concrete(below ; VES-LMC) has been developed for repairing and overlaying the old concrete bridge deck. VES-LMC provides the advantage of very-early-strength, as well as high flexural strength, bond strength, durability, resistance to corrosion, reduced water permeability and resistance to damage from freeze-thaw cycles. The compressive and flexural strength of VES-LMC are 21 MPa and 4.5 MPa at 3 hours after concrete placing, respectively. However, VES-LMC would have a relatively large shrinkage at early-age because of reduced water-cement ratio, big water self-dissipation, and rapid hydration reaction. Therefore, the purpose of this study was to evaluate the early-age and restrained shrinkage of VES-LMC, having an experimental variables such as latex contents and cement types. The latex contents included 0%, 5%, 10%, 15% and 20%, and the cement types included ordinary portland cement and very-early strength cement.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.251-259
• /
• 1998

Currently a hot potato in industries is to reduce the lifecycle of product and maximize the time-to-market benefits. A lot of methodologies and the concrete systems are in use for performing this function. One of these systems is that process are reconstructed by BPR and systems are implemented by PDM. First of all, th analyses of existing product, process and resource data must be preceded. New process is established on the basis of the analyzed information of a company and PDM implements the new process in the company. The consecutive activities like this provide the basic environment for CIM. However, the current system have been developed on the favor of a big company. There are many problems in applying it too a mid-sized company. A lot of function in a PDM tool is not necessary for the mid-sized CIM characteristic. The purpose of this study is to define the ROPP information model that is an appropriate information integration for a design process. The model shows an associated complicated information of a company effectively. Also the modeler makes it possible to manage consistently the constraints of design process on the basis of the analysis of dependency among each resource.

• The Research Journal of the Costume Culture
• /
• v.15 no.4
• /
• pp.593-603
• /
• 2007

The purpose of this study is to study the Central Asian costumes($1{\sim}7C$) and develop new design items and suggest new brand launching. Korean apparel industry has been suffering from imbalance of supply and demand caused by the sagging economy and too many apparel companies. Due to the several years of recession, clothing consumption decreased and foreign brand's market share got bigger. As a result, managing a company became difficult and it is time for Korean apparel industry to enter the global market. We need a brand with new image and design that has big potential of purchasing power not only in Korea but also in China, and furthermore in global market. But even nearby Chinese market already became very competitive. One way of approaching Chinese fashion market is to find something special, for example, their historical background. Central Asian culture and costumes, a part of China, has both Eastern and Western culture. No other apparel industry had interest in the Central Asian costumes yet. Therefore, through their costume, a fresh design idea can be suggested.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2806-2808
• /
• 2010

The structure of 3-aminophenol $(CO_2)_1$ cluster was computationally studied both in the ground and the lowest singlet excited electronic states. The ground state structure and binding energy of the cluster was investigated using the second-order M$\ddoot{o}$ller-Plesset perturbation theory (MP2) at the complete basis set (CBS) limit. The excited state geometry of the cluster was obtained at the second-order approximate coupled cluster (CC2) level with cc-pVDZ basis set, and the $S_0-S_1$ absorption spectrum was simulated by calculating Franck-Condon overlap integral. The ground state geometry of the global minimum with a very high binding energy of 4.3 kcal/mol was found for the cluster, due to the interaction between amino group and $CO_2$ in addition to the strong $\pi-\pi$ interaction between the aromatic ring and $CO_2$. The excited state geometry shows a very big shift in the position of $CO_2$ compared to the ground state geometry, which results in low intensity and broad envelope in the Franck-Condon simulation.

• Food Science and Preservation
• /
• v.3 no.2
• /
• pp.121-129
• /
• 1996

Plum highlighted as a health food is needed to diversify the processed products because labor storage is big problem since the fruit was producted massively in June. The Plum was extracted by the pressing type extractor after washing, drying and removing the seed by seed separator. The crude extract was concentrated with stainless steel vessel at different temperature and stirring speed. This study was obtained as follows. The sugar content of fresh plum concentrated extract was 55.3~58.3$^{\circ}$Brix, and of the freezing plum concentrated extract was 75.5~70.3$^{\circ}$Brix. In color difference, the freezing plum concentrated extract was more deep black than fresh plum. In change patten of pH, it was decreased as concentration was proceed. The final pH was 2.3~2.2 in fresh plum, and 1.8~2.2 in freezing plum. The total acid content of fresh plum concentrated extract and the freezing plum was 45.4~47.8, 60.3~60.9%, respectively. The content of evaporation at 85$\pm$5$^{\circ}C$ was constant irrespective of stirring speed. The yield of extraction of fresh plum was higher than freezing plum. According to this results, the use of stainless vessel, 50rpm, which gave a highly qualified plum concentrated extract.