• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.130-131
• /
• 2007

지방족 액정 계면활성제를 주형물질로 이용, 화학석출을 통해 나노채널을 갖는 금속미립자를 제조하였다. 편광현미경을 이용한 상태도 분석을 통해 헥사고날 구조를 갖는 주형생성 조건을 결정하였으며, 주형의 배열을 방해하지 않고 화학석출이 가능하도록 환원제의 종류, 농도 및 석출방식 등을 조절하였다. 제조된 금속미립자는 입도분석기를 이용하여 평균입경을 측정하였고, TEM 분석을 통해 나노채널의 형성여부를 확인하였다. BET를 이용한 표면적 측정결과, 비표면적이 $112.6m^2/g$로 나노채널 형성으로 인해 비표면적이 크게 증가하였음을 알 수 있었다.

• Resources Recycling
• /
• v.14 no.1
• /
• pp.47-54
• /
• 2005

Korean grape-seed that is one of the agricultural waste was used as a raw material to prepare activated carbon through roasting, carbonization and chemical activation processes. NaOH, KOH, ZnCl$^2$ were also used as activation reagents. The mixing of the ratios of the grape-seed and each activation reagent were varied to 100-300 weight percent. The surface areas of the activated carbon manufacture from the grape-seed were 44.09~121.33 m$^2$/g. The adsorbate transmittance of methylene blue was determined UV absorption at 660 nm as maximum adsorption wavelength using by UV spectrophotometer. As a result, adsorption of methylene blue on the activated carbon prepared with NaOH activation was more successful than others. Equilibrium absorption time was approximately 60 min.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.228.1-228.1
• /
• 2010

선택적 CO 산화반응(PrOx)을 위한 Ru이 고분산 담지된 $Ru/{\alpha}-Al_2O_3$ 촉매를 증착-침전법(deposition-precipitation)으로 제조하였다. 용액의 pH와 aging 시간에 따른 Ru 입자의 크기 변화와 분산도의 영향을 살펴보았으며 함침법(impregnation)으로 비교 촉매를 제조하였다. 촉매의 특성분석은 BET, TPR, CO-Chemisorption분석을 수행하여 촉매의 비표면적, 환원특성, 분산도를 알 수 있었다. 특성분석결과, 증착-침전법으로 제조한 $Ru/{\alpha}-Al_2O_3$ 촉매가 함침법으로 제조한 촉매에 비해 분산도가 높았으며, pH별 촉매 제조에서는 pH6.5로 제조한 촉매가 22.06%로 가장 높은 분산도를 보였다. 또한, 담체의 비표면적 영향에 따른 Ru 입자의 분산도를 살펴보기 위해 ${\gamma}-Al_2O_3$와 ${\alpha}-Al_2O_3$ 담체를 적용한 결과, 비표면적이 작은 ${\alpha}-Al_2O_3$ 담체 표면에서 Ru 분산도가 ${\gamma}-Al_2O_3$ 담체에 비해 높았다. 이는 기공이 발달하여 비표면적이 넓은 ${\gamma}-Al_2O_3$ 담체는 소량의 Ru을 고분산 담지 시 담체 표면보다는 기공 내에 담지 되는 양이 많아 실제 반응 시 반응에 참여하는 표면 활성 금속양이 적음을 알 수 있다. 특히, 선택적 산화반응과 같이 표면에서 빠른 반응이 일어나는 경우, 기공 내부의 활성금속이 반응에 참여하기 어려워 반응 활성이 낮음을 PrOx 반응실험을 통해 확인할 수 있었다. PrOx test 조건은 GHSV 250000~60000, 온도는 80~200도, 람다값은 2~4로 성능 비교하여 실험 하였다. PrOx의 성능평가 결과 담체를 ${\alpha}-Al_2O_3$를 사용하여 deposition-precipitation방법으로 제조한 pH6.5 촉매에서 $100{\sim}160^{\circ}C$에서 90%의 가장 높은 CO conversion을 가지고 18%의 선택도를 가졌다.

• Clean Technology
• /
• v.24 no.4
• /
• pp.280-286
• /
• 2018

In this study, the adsorption performance of vapor phase VOCs under dry conditions was evaluated by using two metal oxides, $TiO_2$ powder and $Al_2O_3$ powder. BET analysis and ammonia in-situ FT-IR analysis were used to analyze specific surface area and surface acid site. As a result, $TiO_2$ powder and $Al_2O_3$ powder had a specific surface area of $317.6m^2\;g^{-1}$ and $64m^2\;g^{-1}$, respectively. In the case of $TiO_2$ powder, many acid sites were observed on the surface. As a result of evaluating the vapor phase VOCs adsorption performance using two metal oxide powders, $TiO_2$ powder having a relatively large specific surface area and a large number of acid sites exhibited relatively good adsorption performance. In particular, it is considered that the specific surface area directly affects the adsorption performance, and further study on the effect of the acid site is required. Based on the $TiO_2$ exhibited excellent adsorption performance, it manufactured into various forms of honeycomb, hollow fiber and disc. As a result, the adsorption performance was lower than that of the powder, but it is advantageous in view of applicability. In addition, it was confirmed that the disc adsorbent having excellent thermal durability due to the characteristics of the manufacturing process stably maintains adsorption performance even at a high temperature desorption process several times.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.296-301
• /
• 2007

Carbon nanofibers (CNFs) are non-microporous materials with a high surface area ($100{\sim}200m^2/g$) and high purity. Therefore, the material has a high potential for use as catalyst support. Activated carbon fibers (ACFs) are of increasing concern with regard to the levels of toxic air pollutants emitted from high-technology industry. Rayon-based CNFs and ACFs was subjected to thermal oxidation under a wide variety of temperature and air conditions to modify the surface properties. Rayon-based CNFs and ACFs were prepared by using thermal chemistry. CNFs were synthesized at temperatures above $600^{\circ}C$ in an air atmosphere and grew with increased temperature and air conditions. After heating at $800^{\circ}C$ for 72 hr, carbonized rayon with ACFs had $2,662m^2/g$ (BET) of surface area and $1.41cm^3/g$ of pore volume. The resulting ACFs had a 99% surface area in which pore size was 10 nm or less, and a 60 % surface area in which pore size was 2 nm or less.

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.180-186
• /
• 1998

In this study, the effect of shear rate on the viscosity variation is examined to understand the flow characteristics of the mixture of bentonite and water. The variation of film thickness according to mixing ratio and viscosity is measured to characterize the film formation. And, the separation of dried film is studied according to film thickness. Specific surface area affecting on adsorption capability is measured using BET method. The viscosity decreases and the film thickness increases as the mixing ratio increases. The separation characteristic of dried film is suitable within a range of 40 to 150 ${\mu}{\textrm}{m}$ in film thickness and 5 to 10% in mixing ratio.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.233-236
• /
• 2000

산업화에 따라 발생하는 산업폐수에는 많은 종류의 유해한 유기물들이 함유되어 있으며, 이러한 유독성 유기물을 제거하기 위하여 많은 연구가 진행되어 왔으나. 기존의 처리 방법들은 2차 환경오염을 유발한다는 문제점을 갖고 있다. 최근 폐수처리에 광촉매를 이용한 광분해 반응이 기존의 처리방법들에서 나타날 수 있는 문제점과 폐수중의 유독성 유기물을 제거할 수 있는 환경친화적 공정이라는 보고가 있은 후 광촉매에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 광촉매 TiO₂의 표면특성을 XRD, SEM 및 BET를 사용하여 자세히 고찰하였다. XRD 결과 Degussa P25는 anatase 구조와 rutile 구조가 섞인 형태였으며, Aldrich Degissa TiO₂는 100% anatase 구조, KIER TiO₂는 100% rutile 구조를 가졌고 SEM 결과 Aldrich와 Degussa TiO₂의 입자형태는 작은 입자들이 뭉쳐있는 형태였으나 KIER TiO₂는 작은 입자들이 독립적으로 분리된 타원형으로 입자크기가 가장 컸다. 반면 BET 결과 Degussa TiO₂의 비표면적이 59㎡/g으로 Aldrich TiO₂(6㎡/g)나 KIER TiO₂(14 ㎡/g)에 비하여 매우 큼을 알 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.36-38
• /
• 2000

NaY형 Zeoilte는 현재 그들의 촉매적 특성과 흡착성 그리고 이온 교환성들을 이용하여 산업에 중요하게 사용되어지고 있다 본 실험은 고온 스팀을 이용한 방법과 산처리에 의한 방법으로 탈알루미나의 효과를 확인하는 실험을 하였다 먼저 SiO₂/Al₂O₃ 몰비가 4-6인 합성 NaY zeolite를 분위기 소성로에 넣고 증기발생 장치를 이용하여 500℃에서 고온 스팀을 분위기 소성로에서 일정하게 주입하였다. 에에 따른 결과는 탈알루미나 처리 후의 XRF와 BET의 결과로 탈알루미나 처리에 따라서 SiO₂/Al₂O₃의 몰비가 20.6에서 21까지 증가한 것을 알 수 있으며 또한 BET의 결과에서 탈알루미나 처리에 의해서 비표면적이 증가한 것을 확인할 수 있으며 특히 meso pore area의 증가는 탈알루미나에 의해서 zeolite의 골격구조가 일부 파괴되었음을 알 수 있다.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.27-32
• /
• 2000

In this study, $Mn_3O_4$ was synthesized by the different equivalent ratios using solution of $MnCL_2 {\cdot} 4H_2O$ and NaOH. We have investigated the crystal structure and surface area by XRD, BET Method, studied on the decompositon and adsorption of carbon dioxide with synthesized $Mn_3O_4$. As the results, we surveyed that main peak was $Mn_3O_4$, some Peaks were $MnO_2$ and $Mn_5O_8$ The specific surface area was ranged from $13.92m^2/g$ to $32.33m^2/g$. The decomposition of $CO_2$ was observed by the differential equivalent ratios at $450^{\circ}C$. $CO_2$ was well decomposed at equivalent ratio of 0.75. The amount of chemisorption of $CO_2$ was ranged from 2.885 to 19.628cc/g. Optimal equivalent ratio was 1.00 for the chemisorption of $CO_2$.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.321-325
• /
• 2012

In this work, we prepared the activated graphite nanofibers (A-GNFs) via chemical activation with KOH/GNFs ratios in a range of 0 to 5. The effect of KOH activation was studied in the surface and pore properties of the samples for electrochemical performance. The surface properties of A-GNFs were characterized by XRD and SEM measurements. The textural properties of the A-GNFs were investigated by $N_2$/77 K adsorption isotherms using Brunauer-Emmett-Teller (BET) equation. Their electrochemical behaviors were investigated by cyclic voltammetry and galvanostatic charge-discharge performance. From the results, electrochemical performances of the A-GNFs were improved with increasing the ratio of KOH reagent. It was found that specific surface area and total pore volume of the A-GNFs were increased by KOH activation.