• Journal of Advanced Marine Engineering and Technology
• /
• 제35권3호
• /
• pp.335-340
• /
• 2011

Building energy saving is one of the most important issues in these days. Control algorithm for energy saving should be designed properly to reduce power consumption in building. Recently, building energy system consists of hybrid energy system coupling with RE (Renewable Energy) source. In this paper, an optimum control algorithm for building energy saving is applied to BEMS (Building Energy Management System) by using an outdoor air temperature prediction strategy. BEMS coupling with renewable energy can control HVAC (Heating, Ventilating and Air-Conditioning) system effectively. In order to verify the effectiveness of building energy saving, BEMS was tested for several months at a laboratorial chamber with an air conditioner, fan and heater. To this end BEMS embedded control algorithm has been tested successfully.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.159-160
• /
• 2011

Recently there are many efforts for saving energy in building. therefore Building energy management systems(BEMS) are expected to a reduction energy cost. BEMS has many benefits which could switch plant on and off automatically. Also It optimize plan operation and services, monitor plant status and environmental conditions and to provide energy analysis and management information. In these days, many public buildings are applied BEMS but there are few studies about application of small or medium buildings. Therefore, in this study, we will find how to apply BEMS in small or medium buildings.

• 한국항해항만학회지
• /
• 제34권9호
• /
• pp.705-709
• /
• 2010

Buildings nowadays are increasingly expected to need higher and more economic performance requirements. Energy consumption in buildings accounts for over 30% of total energy use. The Building Energy Management System (BEMS) and renewable energy (RE) technologies are considered as a potential measure to improve energy efficiency and reduce use of grid-power. It is, however, a challenge to utilise the intermittent energy supply of RE in building energy systems. This paper presents an experimental study on a RE-embedded BEMS. A control algorithm for the RE-embedded BEMS was designed to maximise the utilisation of RE and eventually to reduce electrical utility bill. The proposed system is tested at a laboratorial chamber with an air conditioner, fan and heater. The contribution of RE in building energy system is discussed to this end.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.669-679
• /
• 2018

Energy consumption savings in buildings should be reviewed in diverse areas such as air conditioning system and lighting responsible for cooling and heating, and energy management systems such as BAS (Building Automation System) and BEMS (Building Energy Management System) are introduced to improve energy consumption efficiency and to promote economic control of related facilities by integrated management of energy generated and consumption in buildings. The measured building of this study uses regenerative geothermal system. Measured values of heat pump and system COP were 4.7 and 4.2 respectively, and they were found to be higher 11.9% and 23.5% than rated values. As a result of analyzing the air conditioning and lighting energy from the first floor to the fourth floor performing the air conditioning, the second and third floors, which have a high frequency of use, are compared with the first and fourth floors 50% higher energy consumption ratio. On the other hand, the general heat storage system uses the nighttime power of the previous day to store heat and use it the next day. The total number of days of abnormal operation during the summer season is 61 days. The electricity cost corresponding to the abnormal operation is 1,840,641 KRW, and the normal operation using the nighttime power is 1,363,561 KRW, which is difference of 477,080 KRW, 35% increase in cost. We will utilize it as the main data of BEMS through analysis of winter operation characteristics as well as summer operation characteristics.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.348-354
• /
• 2018

최근 BEMS(Building Energy Management System)는 공간정보를 적극 활용하고 있다. 공간정보가 포함된 BIM(Building Information Modeling)을 잘 활용한다면, 사용자는 공간정보와 연계된 직관적 건물 에너지 관리가 가능하다. 이 연구는 BIM-BEMS 연계를 위한 MF(Model Filter)을 활용한 데이터 맵핑 방법인 M-BDL(MF-based BIM Data Linkage)제안한다. 최근 BEMS은 3차원 공간정보를 적극 활용하고 있다. 이를 통해 사용자는 공간정보가 연계된 직관적인 건물 에너지관리가 가능하다. BIM 데이터를 에너지 관리 시스템에 활용하기 위해서는, 사용자 요구사항 관점에서 필요한 BIM 데이터만 BEMS과 연계할 필요가 있다. 하지만, Rich dataset인 BIM을 그대로 연계한다면 사용자가 불필요한 정보까지 관리해야 하는 부담을 주게 된다. M-BDL을 통해, 무거운 BIM 데이터에서 BEMS에 필요한 데이터만 맵핑함으로써, BIM데이터를 경량화할 수 있었고, 유지보수에 필요한 데이터량을 줄일 수 있다. 이 기술은 필요한 BIM 데이터만 필터링된 BIM 데이터와 BEMS 데이터베이스 간 연계할 수 있는 M-BDL 맵핑 방법을 제안한다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.706-707
• /
• 2015

Our country is aiming at 30% reductions in building energy consumption accounting for 39% of the total energy consumption by 2020[1]. For this purpose, the government is developing and applying the Building Energy Management System (hereinafter, referred to as "BEMS", Smart plug, etc.) while the researches on new renewable energy development. BEMS, which is applied with focus on large buildings, is inducing energy management of the entire building through energy measurement and data management, but considering its economic efficiency, it's very difficult to apply BEMS to small & medium-size buildings. Hereupon, this study intends to implement the case analysis of deterioration and economic efficiency of major equipment in buildings on the basis of electricity consumption which has been measured targeting small & medium-size buildings for a certain period by taking into account that equipment deterioration is a contributor to the increase in energy consumption.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.717-719
• /
• 2013

건물 에너지 관리 시스템(BEMS)의 적용을 통해 실내 환경을 쾌적하게 유지함과 동시에 설비 시스템의 에너지 성능 극대화 및 수명연장의 효과를 기대할 수 있다. 국내에서도 컴퓨터의 범용화와 통신 기술의 발달, 그리고 건물의 대형화와 복잡화에 따라 건물 자동화와 통합관리 시스템의 중요성이 커지게 되었다. 본 논문에서는 이러한 건물 에너지 관리 시스템의 체계적인 설계에 관해 설명한다.

• 한국위성정보통신학회논문지
• /
• 제8권2호
• /
• pp.17-21
• /
• 2013

빌딩 등 건물에너지 절약에 대한 관심이 전 세게적으로 날로 증가하고 있으며, BEMS(Building Energy Management System)을 효율적으로 운용하기 위한 IT 기술에 대한 연구를 지속적으로 진행하고 있다. 최근 LED 조명기술의 발전으로 LED를 제어하여 에너지 절감효과를 극대화 할 수 있으며 BEMS에 이러한 LED 조명 제어기술들이 개발되고 있다. 본 논문에서는 건물에 설치되어 있는 LED조명과 연동되어 있는 객체감지 센서를 ZigBee 통신을 활용하여 서버와 연결이 되며, 사용자가 서버와 연결된 PC를 통해 모니터링 및 제어가 가능한 시스템을 제안하였다. 설계한 구조를 기반으로 빌딩에서 객체를 감지하여 LED 조명을 실시간으로 모니터링 및 제어 가능한 기능을 제안하고, 관련 Software 개발을 통해 구현가능성을 입증하였다.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.105-113
• /
• 2014

Currently, the energy consumption rate in buildings is approximately 28.5% of the total energy consumption in Korea. Therefore the amount of the consumption of petroleum resourses is at a worrying level of the blackout. The system of the amount of the Architectural Energy Efficiency Grade [AEEG] is in force by the government to apply the technologies of the Emissions Trading System and the Target Management System to mitigate the Green House Gases for buildings according to the climate change. On the account the mitigation of the Green House Gases and the reduction of the energy, from the view of maintenance and management, for the new and remodeling buildings should be under consideration. The author wants to present the possible ways how to improve the AEEG for the existing buildings by trying to establish the foundation of the BEMs, and by confirming the potential of the energy savings.

• International journal of advanced smart convergence
• /
• 제8권1호
• /
• pp.82-86
• /
• 2019

We aim to use public data different from the remote BEMS energy diagnostics technology and already established and then switch the conventional operation environment to a big-data-based integrated management environment to operate and build a building energy management environment of maximized efficiency. In Step 1, various network management environments of the system integrated with a big data platform and the BEMS management system are used to collect logs created in various types of data by means of the big data platform. In Step 2, the collected data are stored in the HDFS (Hadoop Distributed File System) to manage the data in real time about internal and external changes on the basis of integration analysis, for example, relations and interrelation for automatic efficient management.