• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.382-389
• /
• 2007

In this paper we report the development of mobility test bed, the realization of basic protocol that supports L3 mobility and the measurement of performance parameters that can affect handover performance. Previously proposed mobility management system, BBM (Break Before Make) method such as MIPV6 and Fast MIPV6, uses one interface in wireless network. In this method, to connect to new AP, it first disconnects existing AP and tries to connect to new AP. This can cause packet loss for the traffic vulnerable to delay such as VoIP. To provide seamless handover between different wireless networks, we propose MBB (Make Before Break) handover method having two network interfaces. Comparative study of previous method and proposed method on mobility and handover was conducted under simulated real environment on the test bed. Almost no packet loss was found with newly proposed method. In conclusion, it is shown that mobility protocol with proposed handover method can be applied to the application services sensitive to delay and packet loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1384-1392
• /
• 1999

A high compression rate is required to transmit video sequences over low bit rate networks such as low bit rate communication channels. When highly compressed videos are transmitted over mobile channels of high error rate, bitstreams corrupted by channel errors are not only difficult to be decoded, but also have fatal effects on the other parts of the bitstreams. In this Paper, we propose an error concealment algorithm for recovering the blocks which can not be decoded due to damaged bitstreams. The proposed error concealment algorithm recovers the damaged blocks using the information of adjacent blocks which are correctly decoded. In the proposed algorithm, the motion vector of the damaged block is estimated using the overlapped block motion compensation(OBMC) and block boundary matching(BBM) techniques. Experiment results show that the proposed algorithm exhibits better performance in PSNR than existing error concealment methods.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.34-34
• /
• 2023

화본과 식물인 홍띠(Imperata cylindrica 'Rubra') 식물체의 기관분화 단계별 시료를 작성하여 이들 몇가지 기관분화에 관련된 유전자의 각 단계별 기관분화체에서 유전자존재와 발현여부를 조사하였다. 또한 식물의 기관분화에 관련된 유전자 정보를 얻기 위하여 일부 유전자의 특성을 정리하였다. 조사된 기관분화 관련 유전자중 탈분화 관련 유전자로는 FIF, RAP2-4 (WIND1) 유전자 등이, shoot 분화 관련 유전자로는 WUS, 부정근 분화관련 유전자로는 OsSCR, WOX11 등, 체세포배발생 관련 유전자로는 BBM1, SERK1, LEC1B, MEA 유전자 등이다. 이들 유전자중 RAP2-4(WID1), FIE, BBM1, SERK1, OsSCR, WOX11, WUS, LEC1B 유전자 등 8종의 기관분화 관련 유전자를 대상으로 화본과 식물의 기관분화의 각 단계별 기관분화체를 작성하여 PCR을 통하여 유전자(gDNA)의 존재여부를 확인한 결과 공시 유전자 모두 홍띠의 각단계 기관분화체에서 존재하였다. 또한 상기 유전자를 사용하여 화본과 식물의 각단계별 기관분화체에 대하여 유전자 발현을 확인한 결과 각단계 기관분화체에서 모두 발현하였다. 5종류 총 15개체의 기관분화 단계별 분화체에서 캘러스 발생 유전자인 FIE는 모식물체 1번을 제외한 14개의 식물체에서 모두 관찰되었으며, 뿌리 발생 유전자인 WOX11은 15개의 모든 식물체에서 탐색되었으며, 체세포 발생 유전자인 LEC1B는 15개 식물체에서 모두 발현하였으나 비교적 약하게 발현하였다. 이상과 같이 본 연구에서는 식물 기내발생시 기관분화관련 유전자의 동향을 파악하여 식물발생학의 기초자료를 구축하고자 하였다.

• Honam Mathematical Journal
• /
• v.33 no.2
• /
• pp.247-259
• /
• 2011

In this paper, the $(\frac{G'}{G})$-expansion method is used to construct new exact travelling wave solutions of some nonlinear evolution equations. The travelling wave solutions in general form are expressed by the hyperbolic functions, the trigonometric functions and the rational functions, as a result many previously known solitary waves are recovered as special cases. The $(\frac{G'}{G})$-expansion method is direct, concise, and effective, and can be applied to man other nonlinear evolution equations arising in mathematical physics.

• The Plant Pathology Journal
• /
• v.34 no.3
• /
• pp.157-162
• /
• 2018

The objective of this work was to accomplish the isolation, molecular identification and characterizing the physiology of the causal agent of the algal spot in mango trees. For this purpose, the pathogen growth was assessed in different culture media, with subsequent observation and measurements of the filamentous cells. The molecular identification was made using mycelium obtained from leaf lesions and pure algae colonies grown in culture medium. Descriptions based on DNA sequencing indicated that the algae is Cephaleuros virescens. The algae must be isolated primarily in liquid medium for further pricking into agar medium. The highest mycelial growth average in Petri dishes occurred when the algae were grown in Trebouxia and BBM. Trebouxia enabled larger cells in the filamentous cells when compared to other culture media.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.420-427
• /
• 2002

In this paper, a simplified structural spring model of integral abutment bridge is proposed to account for the passive earth pressure due to the change of temperature. The magnitude of earth pressure acting on integral bridge abutment mainly depends on the amount and shape of displacement of abutment according to the thermal expansion of superstructure. The proposed simplified model is developed based on the possible displacement shape of integral abutment bridge. Performing the direct stiffness method, the analysis is done by using the proposed method and the results of new model is compared with those of conventional design approach. The study show that it may be possible to obtain more rational and economical design values for integral abutment bridge by applying the proposed design method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.318-319
• /
• 2004

This paper shows an application of single crystal metals and Single Shell Polymer Concentrator (SSPC) to Solar Thermal Propulsion (STP). Based on it, we fabricated a breadboard model of STP system (STP-BBM) for microsatellites. We also proposed Eco-Friendly End-of-Life De-Orbiting (EFELDO) by using such a high performance STP system.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.5
• /
• pp.437-442
• /
• 2013

Objective: The objective of this study was to investigate the effects of drive-assisting system in a shower carrier on the upper body muscle activities of caregivers through drivability tests. Background: In care facilities, one of the major ADL (Activities of Daily Living) factors is bathing/showering. Recently, bath/shower-assisting equipment is actively being introduced in care facilities to reduce caregivers' muscle burden. In particular, it is desirable to utilize a shower carrier equipped with drive-assisting system to effectively care for the elderly. However, there were few systematic studies on the relationship between muscle activities and drive-assisting speeds. Method: For the drivability tests to study the effects on the muscle activities according to the drive-assisting speeds(corresponding drive-voltages: 0.0V, 2.0V, 2.1V, 2.3V), 6 females in their 40s($43{\pm}4yrs$, $157{\pm}5cm$, and $54.5{\pm}1.5kg$) were selected. To measure muscle activities of caregivers through drivability tests, 7 muscles in the upper body(TM/Trapezius Muscle, DM/Deltoid Muscle, BBM/Biceps Brachii Muscle, TBM/Triceps Brachii Muscle, ECRLM/Extensor Carpi Radialis Longus Muscle, FCUM/Flexor Carpi Ulnaris Muscle, and ESM/Erector Spinae Muscle) were selected. Results: In the TM, muscle activities were decreased as 21% compared to 0.0V, when drive-voltage 2.0V was applied, as 57% by 2.1V, and 62% by 2.3V(p<0.05), whereas 40%, 56%, and 69% of muscles activities were decreased respectively from the DM(p<0.05). Also, from the UL(BBM+TBM+ECRLM+FCUM), muscle activities were decreased by 17% with 2.0V as against 0.0V, by 47% with 2.1V, and 52% with 2.3V, whereas decreases in muscle activities from the ESM were found by 20%, 34%, and 42% respectively by 2.0V, 2.1V, and 2.3V(p<0.05). Conclusion: The muscle activities were decreased in the order of the DM, TM, ESM, and UL. As muscle activities were remarkably reduced as drive voltage were increased, it was expected to reduce the upper body muscle burden on the caregivers when using shower carriers equipped with driving-assist system. Applications: The results from this study can be applied for the development of a shower carrier including other equipment to possibly reduce the muscle burden of the caregivers.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.273-288
• /
• 2006

The purpose of this study was to evaluate exophytically vertical bone formation in rabbit calvaria by the concept of guided bone regeneration with a custom-made porous titanium membrane combined with bone graft materials. For this purpose, a total of 12 rabbits were used, and decorticated calvaria were created with round carbide bur to promote bleeding and blood clot formation in the wound area. Porous titanium membranes (0.5 mm in pore diameter, 10 mm in one side, 2 mm in inner height) were placed on the decorticated calvaria, fixed with metal pins and covered with full-thickness flap. Experimental group I was treated as titanium membrane only. Experimental group II, III, IV was treated as titanium membrane with BBM, titanium membrane with DFDB and titanium membrane with FDB. The animals were sacrificed at 8 and 12 weeks after surgery, and new bone formation was assessed by histomorphometric as well as statistical analysis. 1. Porous titanium membrane was biocompatable and capable of maintaining the regeneration space. 2. At 8 and 12 weeks, all groups demonstrated exophytic bone formation and there was a statistical significant difference among different groups only at 12 weeks. 3. The DFDB group revealed the most new bone formation compared to other groups (p<0.05). 4. At 12 weeks, DFDB and FDB groups showed the most significant resorption of graft materials (p<0.05). 5. The BBM was not resorbed at all until 12 weeks. 6. The fixation metal pin revealed excellent effect in peripheral sealing. On the basis of these findings, we conclude that a porous titanium membrane may be used as an augmentation membrane for guided bone regeneration, and DFDB as an effective bone forming graft material. The fixation of the membrane with pin will be helpful in GBR technique. However, further study is required to examine their efficacy in the intraoral experiments.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.201-205
• /
• 2004

The digital color image can be distorted by noise for a transmission or other elements of system. It happens to vague of a boundary side in the division of a color image object, especially, boundary side of an input color image is very important because it can be determined to the division and detection element in pattern recognition. Therefore it is boundary part In this paper, it detects the optimal edge with applying this color image to WCNN algorithm, after it does level up a boundary side of a color image by using the adaptive morphology as the threshold of an input color image. Also, it is used not a conventional fixed mask edge detection method but variable mask method which is cal led a variable BBM. It is confirmed by simulation that the proposed algorithm can be got the batter result edge at the place of closing to each edges and having smoothly curved line.