• Journal of Plant Biotechnology
• /
• v.6 no.3
• /
• pp.165-169
• /
• 2004

The fruits of Vitex rotundifolia in Korea, known as 'Man Hyung Ja', occupy an important position as traditional oriental medicine in Asian countries. It is known that propagation of this plant by seed is difficult and time-consuming with little success. Attempts were made to develop a method by using nodal culture techniques. Explants of stem node without leaves cultured on Nitsch medium containing 1 ml/L BA, gave the best shoot induction ratio. Also, BA with IAA or TDZ treatment showed positive effect on shoot induction. Half-strength Nitsch medium was supplemented with 0.5 mg/L NAA produced better success than did the others on root formation. It showed that many of the regenerants grew successfully on growth chamber at $24^{\circ}c$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.30-39
• /
• 2020

Single-phase barium ferrite powder was synthesized using the sol-gel method. At this time, an attempt was made to find the optimal experimental conditions for the production of single-phase barium ferrite by varying the Fe to Ba molar ratio (Fe/Ba) and the heat treatment temperature. In addition, cobalt-substituted barium ferrite particles were prepared using cobalt, which has an excellent effect on coercivity control for the production of ferrite fine particles having a coercivity of 2.5 to 5.5 kOe for use in high-density magnetic recording media. The changes in the magnetic properties of these were investigated. X-ray diffraction (XRD), thermogravimetric-differential thermal analysis (TG-DTA), and field emission scanning electron microscopy (FE-SEM) were used to observe the synthesis of single-phase, and Fourier transform infrared spectroscopy (FT-IR) and energy dispersive X-ray spectrometry (EDS) were used to analyze the chemical structure and composition. The coercivity of the cobalt-substituted barium ferrite powder was measured by vibrating sample magnetometry (VSM). As a result, single-phase Barium ferrites were synthesized when the Fe/Ba molar ratio was 10, and the heat treatment temperature was 900 ℃. The coercivity decreased with increasing the amount of Co added. Barium ferrite, having a coercivity of 2.5 to 5.5 kOe for use in high-density magnetic recording media, was synthesized when the Co to Fe(Co/Fe) molar ratio was less than 0.16.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.310-313
• /
• 1989

The semiconducting bodies were prepared by doping the bariume titanate with $Sb_2O_3,Nb_2O_5$and by subsequent sintering in air. The sintered bodies were annealed between $1100^{\circ}C$ and $1250^{\circ}C$ for 30 minutes to 2 hours in air. The resistivity was measured as a function of temperature from $20^{\circ}C$ to $240^{\circ}C$. The anomalous effect in resistivity occurred all of the $Nb_2O_5$ and $Sb_2O_3$doped barium titanate specimens, which were sintered in air atmosphere, and the most effective PTC effect occurred through 1 hour of sintering time at $1350^{\circ}C$ and 30 minute of annealing time at $1200^{\circ}C$. The resistivity - temperature characteristics seem to be intimately related to oxygen adsorption at grain boundaries and also to the thickness of insulating layers formed at grain boundaries during heat treatment.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.4
• /
• pp.221-225
• /
• 1999

This paper shows the parameters to affect the critical characteristic of YBaCuO superconducting bulk fabricated by MPMG (Melt Powdered Melt Growth)process. In order to investigate proper processing variables, the effect of the holding time at the melting temperature and that of the slow cooling time in $O_2\; ambient\; on\; the\; J_c$ were experimented. And then with the above obtained heat treatment conditions, the effects of addition of $Y_2BaCuO_5\; and\; Ag\; on\; the\; J_c$ were also investigated. A proper slow cooling time yields phase transformation from Tetragonal $(YBa_2Cu_3O_6)$ to Orthorhombic $(YBa_2Cu_3O_7)$ during an annealing time in $O_2$. Ag addition plays a role in increasing the $T_c\; and\; the J_c$, but the magnetization decreases. The $J_c$ and the magnetization increase with addition of Y211. $J_c$ of the sample added Ag 10wt% is superiorover 3000 G. Proper holding time, slow cooling time and amount of impurity addition are important parameters in fabricating the YBaCuO bulk by MPMG process with high $J_c$.

• Journal of Pharmacopuncture
• /
• v.16 no.3
• /
• pp.11-22
• /
• 2013

Objectives: The present investigation aimed at examining if post-cancer treatment with a potentized homeopathic drug, Condurango 30C, which is generally used to treat oesophageal cancer, could also show an ameliorating effect through apoptosis induction on lung cancer induced by benzo[a]pyrene (BaP) in white rats (Rattus norvegicus). Methods: Lung cancer was induced after four months by chronic feeding of BaP to rats through gavage at a dose of 50 mg/kg body weight for one month. After four months, the lung-cancer-bearing rats were treated with Condurango 30C for the next one ($5^{th}$), two ($5^{th}-6^{th}$) and three ($5^{th}-7^{th}$) months, respectively, and were sacrificed at the corresponding time-points. The ameliorating effect, if any, after Condurango 30C treatment for the various periods was evaluated by using protocols such as histology, scanning electron microscopy (SEM), annexinV-FITC/PI assay, flow cytometry of the apoptosis marker, DNA fragmentation, reverse transcriptase-polymerase chain reaction (RT-PCR), immunohistochemistry, and western blot analyses of lung tissue samples. Results: Striking recovery of lung tissue to a near normal status was noticed after post-cancerous drug treatment, as evidenced by SEM and histology, especially after one and two months of drug treatment. Data from the annexinV-FITC/PI and DNA fragmentation assays revealed that Condurango 30C could induce apoptosis in cancer cells after post-cancer treatment. A critical analysis of signalling cascade, evidenced through a RT-PCR study, demonstrated up-regulation and down-regulation of different pro- and anti-apoptotic genes, respectively, related to a caspase-3-mediated apoptotic pathway, which was especially discernible after one-month and two-month drug treatments. Correspondingly, Western blot and immunohistochemistry studies confirmed the ameliorative potential of Condurango 30C by its ability to down-regulate the elevated epidermal growth factor receptor (EGFR) expression, a hallmark of lung cancer. Conclusion: The overall result validated a positive effect of Condurango 30C in ameliorating lung cancer through caspase-3-mediated apoptosis induction and EGFR down-regulation.

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.54-61
• /
• 1998

This study was conducted in order to evaluate the treatment efficiencies of anaerobic packed and fluidized-bed biofilm and to investigate applicability in treating livestock wastewater. Biocarbonate alkalinity(BA) and volatile fatty acid(VFA) were about 3,230-3,270 mg/l, 3,790-3,126 mg/l(as CaCO$_3$) and 224-402 mg/l, 141-387 mg/l(as CH$_3$COOH), and VFA/BA ratio was about 0.069~0.12, 0.045-0.12 in packed and fluidized-bed biofilm. When COD loading rate was 6.0 kg COD/$m^3\cdot$ day in packed and fluidized-bed biofilm, methane gas production were 3.23 l/day and 4.38 l/day, respectively. In the same COD loading rate, methane gas production volumes per kg COD removal were 0.25 m$^3$ CH$_4$/kg COD$_{rm}$ and $0.28 m^3 CH_4/kg COD^{rm}$, respectively. At this time, it could be estimated that fluidized-bed biofilm was more high. In case of HRT 0.94 day(6.0 kg COD/$m^3\cdot$ day) and 11 day(0.5 kg COD/$m^3\cdot$ day), packed-bed biofilm showed 59% and 81% COD removal efficiency, respectively. While fluidized-bed biofilm showed 72% and 85% removal efficiency, respectively. It was showed that fluidized-bed biofilm was more efficient. Packed-bed biofilm was higher than fluidized in treatment efficiencies of organic matters, but required continuous treatment using combined system, because it was very exceeded over an environmental standard solidified from '96 year. In operating fluidized-bed biofilm, if farm house consider high power cost according to high circulation ratio in an economic point of view, it would have an effect that farm house use packed-bed biofilm as combined system in treating livestock wastewater.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.4
• /
• pp.217-223
• /
• 2000

The boronizing effects of STD 61 steel have been studied on the micro structure and hardness. The STD 61 Steel was soaked in molten salt, consisted of KCl, $BaCl_2$, NaF, $B_2O_3$, FeB, and Ce, at various temperatures and times. The boronizing conditions for the peak hardness were the temperature range of $900^{\circ}C$ to $950^{\circ}C$ for 5 hr and that of $1000^{\circ}C$ for 3 hr, respectively. Four boride layers such as FeB, $Fe_2B$, ${\alpha}$ and matrix layer surface were observed from the microscopic surface examination. The thickness of boride layer was increased by increasing the boronizing time and the temperature. The structure of boride layer was tooth shape.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.325-329
• /
• 2018

There are two kinds of calla belonging to the Zantedeschia spp. depending on the growing condition. Between them, various colored calla with flower shape and flower color are very popular as cut flowers. However, colored calla is very low in natural reproduction rate, and it takes a long time to obtain a flowering bulb. So it is urgent to establish a large breeding system of good varieties. In this study, various plant growth hormone treatments were carried out to improve the growth of the plants in calla. Root formation was the highest at 81.5 % in basal MS medium, and the formation of shoot and multiple shoots were the highest at 100.0 % and 36.4 % in the combined treatment of BA 2.0 mg/L and IBA 1.0 mg/L, respectively. In fresh weight, the highest growth rate was observed with 11.2 times increase in BA 2.0 mg/L single treatment. Auxin and cytokinin mixed treatment were widely used in previous studies and positive effects on the growth of calla plants will help to establish the micro-propagation system.

• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.145-153
• /
• 2009

By introducing chitosan treatment prior to dyeing, examination was given to the effect of chitosan coated on the surface of fabrics on the color change of dyed fabric based on th e change of ${\Delta}E$, a*, and b* values. At the same time, the dyeing mechanism of Caesalpinia sappan dyestuff was predicted by the investigation of the change of air-permeability ac cording to the chitosan treatment. The change of elution was investigated by the examination of the elution of metallic ions employed as mordants after soaking dyed fabrics in the solution of alkaline perspiration ba sed upon the fact that chitosan carries excellent absorption ability toward metallic ions.

• Toxicological Research
• /
• v.19 no.1
• /
• pp.39-44
• /
• 2003

Two local irritation and skin sensitization studies of nonspecific immunostimulator, $BARODON^{\circledR}$ were carried out with New Zealand White rabbits and Hartley guinea pigs. In skin irritation test of male New Zealand White rabbits, body weights were not significantly changed and there were no responses after treatment for 24 or 72 hours and the Primary irritation index (P.1.1.) was '0'. And, in the eye irritation test, there were chemosis in some of rabbits. One of 3 rabbits in washing group was detected chemosis after 24 and 72 h following treatment and 2 of 6 rabbits in non-washing group were detected chemosis after 24h and 7 days following treatment. Therefore, total score is '4' after 24 h and '2' after 72 h following treatment by conforming article "some blood vessel are clearly hyperemic" . However evaluation value is non-irritant because M.O.I. (Mean ocular irritation index) score is below during the all experimental period and no significance through individuals and exposure time. In skin sensitization, the score of skin reaction was graded 1 with 0% sensitization rate. Taken together, these results indicate that $BARODON^{\circledR}$ may be non-irritant material. material.