• 한국음향학회지
• /
• 제43권1호
• /
• pp.60-71
• /
• 2024

본 연구는 일반적인 평평한 에틸렌 비닐 아세테이트(Ethylen Vinyl Acetate, EVA) 완충재의 형상을 변화시켜 다양한 차음소재와 조합하여 복합구조의 바닥충격음 변화를 조사하는 데에 목적이 있다. 바닥충격음 저감에 효과적인 완충재를 선정하기 위해 Flat, Deck, Cavity type의 EVA, EPS, PET 흡음재, PP판넬, 고무발판 등 다양한 완충재를 조합하여 뱅머신을 이용한 1차 실험을 진행하였다. 1차 실험 데이터에 대해 통계분석한 결과 완충재 두께가 40 mm에 가까울수록 바닥충격음 저감효과가 증가하였으며 PET 흡음재, PP시트, 고무발판 등을 조합한 복합완충재에서 바닥충격음 효과가 증가하는 것을 알 수 있었다. 이에따라 2차 실험에서 모든 복합완충재의 두께는 40 mm로 통일하였으며, 1차 실험에 사용된 Flat, Deck, Cavity type 및 EVA를 발판형태로 가공한 Mount type 등 4가지 형태의 복합완충재를 설계하였다. 또한, Mount type을 제외한 3가지 기본 형태에서 각각 PET 흡음재(7 mm)를 추가했을 시 바닥충격음 변화를 살펴보았으며, Mount type의 경우 EVA발판 개수에 따른 바닥충격음 변화에 대해 고무공 충격원을 이용한 2차 실험을 진행하였다. 모든 실험은 공인인증시험기관의 목업실험실에서 진행하였다. 실험 결과, 기본형태의 Flat, Deck, Cavity type에서 PET를 추가할 경우 통계적으로 경량 5 dB ~ 9 dB, 중량 1 dB ~ 5 dB의 저감효과가 나타난 것을 알 수 있었다. 특히, Mount type의 경우 발판 수가 36개 이상일 때 경량 및 중량충격음에서 우수한 것으로 나타났다. 또한, 4가지 기본형태에 따라 동탄성계수가 높아질수록 바닥충격음의 저감이 증가하는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.986-990
• /
• 2004

Condensation of salicylaldehyde $(2-HOC_6H_4C(O)H)$ with allylamine afforded the unsaturated salicylaldimine, $2-HOC_6H_4C(H)=NCH_2CH=CH_2$. Similar reactivity was observed with substituted salicylaldehydes. Further reaction of these Schiff bases with palladium acetate or $Na_2PdCl_4$ afforded complexes of the type $PdL_2$, where L = deprotonated Schiff base. The molecular structure of the parent salicylaldimine palladium complex $[trans-(2-OC_6H_4C(H)=NCH_2CH=CH_2)_2Pd]$ (1) was characterized by an X-ray diffraction study. Crystals of 1 were monoclinic, space group $P2_1/n,\;a\;=\;14.0005(9)\;{\AA},\;b\;=7.2964(5)\;{\AA},\;c\;=\;17.5103(12)\;{\AA},\;{\beta}\;=\;100.189(1)^{\circ}$, Z = 4. Analogous chemistry with 4-vinylaniline also gave novel palladium complexes containing a pendant styryl group. Crystals of $[trans-(2-HOC_6H_4C(H)=N-4-C_6H_4CH=CH_2)_2Pd]$ (4) were monoclinic, space group $P2_1/c$, a = 13.7710(14) ${\AA}$, b = 11.0348(11) ${\AA}$, c = 7.8192(8) ${\AA}$, ${\beta}\;=\;98.817(2)^{\circ}$, Z = 2.

• Journal of Astronomy and Space Sciences
• /
• 제23권4호
• /
• pp.435-444
• /
• 2006

인공우주물체는 출현 시간이 비교적 짧고 운동 특성이 고정적이지 않기 때문에 한 번의 관측으로 측광 및 분광 데이터를 획득하기 어렵다. 따라서 인공우주물체의 측광 및 분광 동시 관측을 위해서 경희대학교 인공위성 추적 및 관측시스템에 다중 광학계를 탑재할 수 있는 가대를 설계하였다. 이 연구에서는 구조해석을 통해 다중 광학계 탑재 시에 개조된 가대의 변형을 계산하고 인공 우주물체 추적 및 관측 시 발생할 수 있는 가대의 지향오차를 추론하여 관측시야에서 인공우주물체를 안정적으로 추적할 수 있음을 보였다. 또한 등가응력 해석을 수행하여 가대의 구조적 안전성을 확인하였다.

• BMB Reports
• /
• 제44권3호
• /
• pp.199-204
• /
• 2011

Ephrin signaling is involved in various morphogenetic events, such as axon guidance, hindbrain segmentation, and angiogenesis. We conducted a yeast two-hybrid screen using the intracellular domain (ICD) of EphrinB1 to gain biochemical insight into the function of the EphrinB1 ICD. We identified the transcriptional co-repressor xTLE1/Groucho as an EphrinB1 interacting protein. Whole-mount in situ hybridization of Xenopus embryos confirmed the co-localization of EphrinB1 and a Xenopus counterpart to TLE1, xTLE4, during various stages of development. The EphrinB1/xTLE4 interaction was confirmed by co-immunoprecipitation experiments. Further characterization of the interaction revealed that the carboxy-terminal PDZ binding motif of EphrinB1 and the SP domain of xTLE4 are required for binding. Additionally, phosphorylation of EphrinB1 by a constitutively activated fibroblast growth factor receptor resulted in loss of the interaction, suggesting that the interaction is modulated by tyrosine phosphorylation of the EphrinB1 ICD.

• 한국진공학회지
• /
• 제4권4호
• /
• pp.413-416
• /
• 1995

고주파 마그네트론 스펏터링법을 이용하여 ZnO막을 제조하고 유리기판 위에 ZnO-SAW필터를 제작하였다. ZnO막의 제조 조건은 고주파 전력 150W, 기판온도 $200^{\circ}C$, 분위기압 5mTorr 및 O2/(Ar+O2)비 50%였다. 한편 IDT(Inter-digital transducer)전극은 전극 폭을 2.56mm, 전극 거리를 2,936mm, λ/8폭을 $8mu$m로 설계하였다. 제작된 ZnO-SAW필터의 주파수 응답을 측정하기 위해 소자는 mount(TO8)에 고정시켰다. ZnO SAW필터의 통과 대역(3 dB대역폭)은 345.2~44.8 MHz로 9.6MHz의 대역 폭을 나타내었으며 중심주 파수는 40 MHz를 나타내었다. 또한 삽입 손실은 39 dB, 통과 대역에서의 리플(ripple)은 $\pm$ 0.8 dB 및 rejection은 17 dB를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1673-1675
• /
• 2004

The design, modeling and measurement of RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a LTCC multi-layer switching circuit and integrated low pass filter. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.29-33
• /
• 2017

This paper proposes a half-mode substrate integrated waveguide (HMSIW) amplifier using lumped-element transition. The input and output impedances of this amplifier are matched by the lumped-element transition structure. This structure provides compact impedance and mode matching circuits between the HMSIW and a stand-alone amplifier. Surface mount technology inductors and capacitors are implemented to realize the lumped-element transition. A prototype of the proposed HMSIW amplifier shows 15 dB gain with 3 dB bandwidth of 4 to 7.05 GHz in a simulation and measurement.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.185-189
• /
• 2005

This paper focuses on the design for Rx/Tx switch module of GSM(global standard mobile) band, characterization of a miniature, low power and dual-band implementation of the front-end switch module with low-pass filer And the effort to make agreement between the simulated design and the measured data for these solutions takes the place through accumulated design and manufacturing data library. We present the design, modeling and measurement of switch module integrating GSM Rx/Tx switching circuit and LPF(low pass filter) on a LTCC(low temperature co-fired ceramic) substrate. For GSM application, insertion and return loss of the low pass filter designed was less than 0.3 dB which was less than 12.7 dB at 900 MHz. The LTCC switch module contained 10 embedded passives and 3 surface mount components integrated on 4.6$\times$4.8$\times$1.2 mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module measured at 900 MHz was 11 dB. In both of the design approach yielded excellent agreement between measured and simulated results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.710-713
• /
• 2004

The design, simulation, modeling and measurement of a low temperature co-fired ceramic (LTCC) RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a Rx/Tx switching circuit and integrated low pass filter. The low pass filter function was designed to operate in th GSM band. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ nm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• BMB Reports
• /
• 제41권4호
• /
• pp.267-277
• /
• 2008

Insects mount a robust innate immune response against a wide array of microbial pathogens. The hallmark of the Drosophila humoral immune response is the rapid production of anti-microbial peptides in the fat body and their release into the circulation. Two recognition and signaling cascades regulate expression of these antimicrobial peptide genes. The Toll pathway is activated by fungal and many Gram-positive bacterial infections, whereas the immune deficiency (IMD) pathway responds to Gram-negative bacteria. Recent work has shown that the intensity and duration of the Drosophila immune response is tightly regulated. As in mammals, hyperactivated immune responses are detrimental, and the proper down-modulation of immunity is critical for protective immunity and health. In order to keep the immune response properly modulated, the Toll and IMD pathways are controlled at multiple levels by a series of negative regulators. In this review, we focus on recent advances identifying and characterizing the negative regulators of these pathways.