• Progress in Medical Physics
• /
• v.3 no.2
• /
• pp.1-12
• /
• 1992

For intraoperative radiation therapy using electron beams, a cone system to deliver a large dose to the tumor during surgical operation and to save the surrounding normal tissue should be developed and dosimetry for the cone system is necessary to find proper X-ray collimator setting as well as to get useful data for clinical use. We developed a docking type of a cone system consisting of two parts made of aluminum: holder and cone. The cones which range from 4cm to 9cm with 1cm step at 100cm SSD of photon beam are 28cm long circular tubular cylinders. The system has two 26cm long holders: one for the cones larger than or equal to 7cm diamter and another for the smaller ones than 7cm. On the side of the holder is an aperture for insertion of a lamp and mirror to observe treatment field. Depth dose curve. dose profile and output factor at dept of dose maximum. and dose distribution in water for each cone size were measured with a p-type silicone detector controlled by a linear scanner for several extra opening of X-ray collimators. For a combination of electron energy and cone size, the opening of the X-ray collimator was caused to the surface dose, depths of dose maximum and 80%, dose profile and output factor. The variation of the output factor was the most remarkable. The output factors of 9MeV electron, as an example, range from 0.637 to 1.549. The opening of X-ray collimators would cause the quantity of scattered electrons coming to the IORT cone system. which in turn would change the dose distribution as well as the output factor. Dosimetry for an IORT cone system is inevitable to minimize uncertainty in the clinical use.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.1-29
• /
• 1969

Experiments on rice concerning it s varieties, fertilization, seedling dates and herbicides have been conducted to determine the most desirable method of direct sowing cultivation on dry paddy field land in the middle part of Korea. The results obtained at the Office of Rural Development of Choongnam Province are as follows:. 1. Sixteen different derivatives from the main varieties of low land rice were cultivated on a dry paddy field by the direct sowing method; at the same time, a few varieties were tried adopting the common transplanting cultivation method. The yield and yield factors from these two groups were examined to give the following results: a) Compared to the common transplanting cultivation, the direct sowing method showed remarkably increased number of panicles while the number of flowers per panicle was shown to be significantly decreased. The maturing ratio was detected to be lowered. The yield horn them differed according to the different varieties : good yield was obtained from Hokwang while Norin ＃25 proved poor when compared with the common transplanting cultivation method. b) Among sixteen varieties tested, Sunsou, Norin ＃25, Jaigou, Hokwang, Palkueng and Gosi showed comparatively high yields, their yield being more than 325 kilograms per 10 Are, but Nampoong, Paldal, Nongkwang, Norin ＃29, Eunbangju ＃101 and Shiro gane showed less yield, their yield being less than 271 kilograms per 10 Are, the relations between the yield and the yield factors can be summarized as follows; Number of varieties and their rice yield. 1) The varieties which were great in the, number of panicles and high in yield=Jaigoun, Hokwang Palkueng and Gosi. 2) The varieties which were low in the number of panicles and high in yield=Sounsou and Norin ＃25. 3) The varieties which were great in the number of panicles and poor in yield=Eunbangju ＃101 and Sirogane. 4) The varieties which were poor in the number of panicles and poor in yield: Nampung, Paldal and Norin ＃29. Number of flowers per panicle and yield. 1) The varieties which were great in the number of flowers per panicle and high in yield: Sounsou, Norin ＃25 and Gosi. 2) The varieties which were poor in the number of flowers per panicle and high in yield ; Jaigoun, Hokwang and Palkueng. 3) The varieties which were great in the number of flowers per panicle and poor in yield: Paldal and Nampung. 4) The varieties which were poor in the number of flowers per panicle and poor in yield: Norin ＃29. Eunbangju ＃101 and Sirogane. Maturing ratio and yield. 1) The varieties which were high in the maturing ratio and high in yield: Jaigoun, Sounsou, Norin ＃25 and Palkueng. 2) The varieties which were low in the maturing ratio and high in yield: Hokwang and Gosi. 3) The varieties which were early maturing rat io and low in yield: Hokwang and Gosi. 4) The varieties which were late maturing ratio and poor in yield: Eunbangju ＃101, Nampungand Sirogane 1, 000 grain weight and yield. 1) The varieties which were heavy in 1, 000 grains weight and high in yield=Norin ＃25 and Hokwang. 2) The varieties which were light in 1, 000 grains weight and high in yield=Sounsou and Jaigoun. 3) The varieties which were heavy in 1, 000 grains weight and poor in yield=Nongkwang and Eunbanju. 4) The varieties which were light in 1, 000 grains weight and poor in yield=Norin ＃29 and Sirogane. 2. The experiment on fertilization showed that the most desirable amount to be given per 10 Are was 10 kilograms of Nitrogen, 5 kilograms of phosphate and 6 kilograms of potassium; and when the Nitrogen given exceeded 8 kilograms, its effect was better when given in amsll consecutive (split) amounts, while the maturing ratio and the number of the flowers per panicle increased when Nitrogen was given in large amount during the later stage of growth of rice. 3. The experiment on the date and amount of seedling showed that the tested variety, Sunsou gave the best results when planted on the days between 25 April and 10 May. Eight liters per 10 Are were preferable if planted early and 12 liters per 10 Are if planted late. The reason why the later planting gave a lower yield was that the number of flowers per panicle was fewer. 4. The experiment on the irrigation for rice with direct sowing cultivation immersed in water showed that it was the most satisfactory when irrigated on 25th June, 55 days after its seedling, its plot giving the best yield. The plots 10th June and 15th July showed just as good results. However, irrigated later, than 15th July it showed lower yields. 5. Compared to the yield of the plot controlled by the common method, the yield from the plots treated with chemical herbicide such as LOROX, TOK, PCP, SWEP, Mo-338 on dry condition soil seemed poorer, but significant difference was not found statistically. On the other hand in the case where chemical herbicides such as TOK, Mo-338, Stam F-34 or ORDRAM were used after irrigation, the yield from the ORDRAM and TOK treated plots did not show significant differences compared to the common hand weed controling method, but those treated with chemicals other than the above showed a lower yield.

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.3-32
• /
• 1995

The Highway Capacity Manual specifies procedures for evaluating intersection performance in terms of delay per vehicle. What is lacking in the current methodology is a comparable quantitative procedure for ass~ssing the safety-based level of service provided to motorists. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections based on the relative hazard of alternative intersection designs and signal timing plans. Conflict opportunity models were developed for those crossing, diverging, and stopping maneuvers which are associated with left-turn and rear-end accidents. Safety¬based level-of-service criteria were then developed based on the distribution of conflict opportunities computed from the developed models. A case study evaluation of the level of service analysis methodology revealed that the developed safety-based criteria were not as sensitive to changes in prevailing traffic, roadway, and signal timing conditions as the traditional delay-based measure. However, the methodology did permit a quantitative assessment of the trade-off between delay reduction and safety improvement. The Highway Capacity Manual (HCM) specifies procedures for evaluating intersection performance in terms of a wide variety of prevailing conditions such as traffic composition, intersection geometry, traffic volumes, and signal timing (1). At the present time, however, performance is only measured in terms of delay per vehicle. This is a parameter which is widely accepted as a meaningful and useful indicator of the efficiency with which an intersection is serving traffic needs. What is lacking in the current methodology is a comparable quantitative procedure for assessing the safety-based level of service provided to motorists. For example, it is well¬known that the change from permissive to protected left-turn phasing can reduce left-turn accident frequency. However, the HCM only permits a quantitative assessment of the impact of this alternative phasing arrangement on vehicle delay. It is left to the engineer or planner to subjectively judge the level of safety benefits, and to evaluate the trade-off between the efficiency and safety consequences of the alternative phasing plans. Numerous examples of other geometric design and signal timing improvements could also be given. At present, the principal methods available to the practitioner for evaluating the relative safety at signalized intersections are: a) the application of engineering judgement, b) accident analyses, and c) traffic conflicts analysis. Reliance on engineering judgement has obvious limitations, especially when placed in the context of the elaborate HCM procedures for calculating delay. Accident analyses generally require some type of before-after comparison, either for the case study intersection or for a large set of similar intersections. In e.ither situation, there are problems associated with compensating for regression-to-the-mean phenomena (2), as well as obtaining an adequate sample size. Research has also pointed to potential bias caused by the way in which exposure to accidents is measured (3, 4). Because of the problems associated with traditional accident analyses, some have promoted the use of tqe traffic conflicts technique (5). However, this procedure also has shortcomings in that it.requires extensive field data collection and trained observers to identify the different types of conflicts occurring in the field. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections that would be compatible and consistent with that presently found in the HCM for evaluating efficiency-based level of service as measured by delay per vehicle (6). The intent was not to develop a new set of accident prediction models, but to design a methodology to quantitatively predict the relative hazard of alternative intersection designs and signal timing plans.

• Weed & Turfgrass Science
• /
• v.3 no.2
• /
• pp.86-94
• /
• 2014

Survey was carried out in paddy fields to investigate the dominance of weed species and weed occurrence on 200 fields of southern Gyeonggi region in Korea during the year 2013. We observed 3 species of grass, 5 species of sedge, and 11 species of broadleaf and other weeds. The most dominant weed species was Eleocharis kuroguwai, followed by Echinochloa crus-galli, Sagittaria trifolia, Monochoria vaginalis, Scirpus juncoides and Bidens tripartita. The dominance value of E. kuroguwai and B. tripartita decreased compared to the survey results performed in 2005 but that of M. vaginalis, S. juncoides, S. trifolia and E. crus-galli increased. Weed occurrence increased from 2.83 g in 2005 to 3.51 g in 2013 based on weed dry weight per $m^2$. Occurrence ratio of annual weeds to perennial weeds changed from 45.2% : 54.8% in 2005 to 45.8% : 54.2% in 2013. If we analyze dominance of weed species based on the rice transplanting timing, E. kuroguwai and E. crus-galli were the most dominant weed species at mid-May transplanting, and M. vaginalis and S. juncoides were the most dominant weed species at late- May transplanting, and M. vaginalis and E. kuroguwai were the most dominant weed species at early-June transplanting. Since paddy weeds resistant to sulfonylurea herbicides are expected to be continuously increased, the regular monitoring of their occurrence and efficient control methods should be considered in future.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.213-254
• /
• 1996

The Korean Geographical Society was founded in 1945, when Korea was liberated from the Japanese rule. And The Journal of the Korean Geography activated academic studies of geography by publishing research papers in it. Professor Kang, Dae-Hyun wrote the first two specialized papers of rural geography in 1966: " Flood Plain Settlements on the Han River" and "The Location and Form of the Dispersed Villages around Dae-Cwan-Ryung". The early studies of rural geography were not based on serious academic foundations, such as the adjustment of theoretical notions and a good grasp of subjects. After choosing subjects that came to hand without academic consideration. they simply enumerated generalized items of the results of the field work investigation such as the location the landscape and the process of formation of the settlements. In the 1970s and 1980s, however, rural settlement studies progressed remarkably in Korea. More than 80% of 318 dissertations, theses, or papers collected for this review were written in the late 1980s, and the subjects and methodology became diversified. As may be expected, recent studies are found very systematic and problem-solving in the various fields - contexual understanding spatial structure, the development of clan villages according to the socialization process, the effects of rural-out migration on the change of villages etc. Such a trend can be understood as a reaction to the circumstances under which, as the Western society already experienced, rural villages become washed out by the waves of industralization and urbanization and hardly continue to exist. In this paper, geographical studies of rural settlement which have been carried out in Korea last fifty years will be reviewed under the four headings on the studies related to a) farming villages; b) fishing villages; c) mountain villages: and d) special function villages. Studies of farming villages and related ones are very diverse. The results of the studies carried out last fifty years can be classified into sixteen subjects. Just as, in the West, studies of rural settlement have been mainly concerned with farming villages since rural geography came into being, so, in Korea, they have been centred on farming villages. It is a natural result considering the history of human life. Even in Korea, however the rural settlement is no more an isolated life space which keeps unique traditions of old life style, but it begins to form a dynamic life space connected to big cities by heavy traffic. Because the modern farming villages of Korea have an undetachable connection with the cities, special methodology to solve new problems has been posed in the studies of rural settlement. Many scholars have produced a lot of studies of farming villages, and three of them are prominent: Oh. Hong-Seok, Choi, Ki-Yeop, and Lee, Moon-Jong. Oh, Hong-Seok is a versatile and hard-working scholar who has published more papers than anyone else in the various fields of rural geography such as farming villages, fishing villages, mountain villages, and reclamation villages. And he has expanded his concerns to environment issues in recent years. Choi, Ki-Yeop has maintained that the prototype of Korean rural villages is clan villages continuing to write a series of good papers in which he pursues their regionalizion in the process of socialization. Lee, Moon-Jong divides the spatial organization of side settlement, sahachon (settlement near the temple), religion settlement, orchard settlement, settlement near the foreign military camp, displaced people's settlement. Chung Gam Lok settlement, etc. Though The Korean Geographical Society has half a century's history, academic activties in the field of rural settlement have been performed no more than thirty years. We cannot help saying that it is admirable that in such a rather short time we have five academical schools of the rural geography in Korea. geography in Korea.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.2
• /
• pp.89-96
• /
• 1975

The experiment was carried out to investigate the chemical properties of cement kiln dusts, abundantly produced from cement industry as a byproduct, and their effectiveness on rice yield. The field experiment was conducted on the acid paddy soil developed on basalt at Dongsong-Myon, Chulwon-Kun, Gangwon-Do. Two kinds of cement kiln dusts were used ; By Pass (BP) collected from the suspension preheater and Electric Precipitate (EP) from the cottrell electric precipitator. The levels of cement kiln dust applied were 100kg/10a, 200kg/10a and 300kg/10a, and the recommended variety "Nong Back" was adopted for this experiment. The results obtained are summarized as follows ; 1. The component of cement kiln dusts seems to be quite suitable for liming material. BP has 55% alkalinity, 41.7% of soluble calcium, 9.8% of soluble magnesium and 4.5% of water soluble silicate, while EP has 53.5% alkalinity, 41.7% soluble calcium, 8.3% soluble magnesium and 1% water soluble silicate. 2. The relative effectiveness of cement kiln dust in the soil will be superior due to very fine particle size. EP pass through completely 270 mesh screen, and 95% of BP pass through 150 mesh screen, 68% passing 270 mesh. 3. BP application at the rate of 100kg/10a increased 21% of rice yield as compared with control and EP 15%. It was observed that the affected yield components were increased panicle number per hill, grain number per panicle and 1,000 grains weight. 4. The application of optimum amount (100kg/10a) of cement kiln dusts accelerated the uptake of nutrients by rice plant and increased rice yield. However, the excess amounts (200kg/10a, 300kg/10a) of cement kiln dusts retarded the uptake of nutrients from soil.

• Journal of Life Science
• /
• v.9 no.4
• /
• pp.395-407
• /
• 1999

The queens of Korean native bumblebee species, Bombus ignitus were collected from the field in the spring of 1997 and reared under the various temperatures as 15$^{\circ}C$$\pm$1$^{\circ}C$, 2$0^{\circ}C$$\pm$1$^{\circ}C$, $25^{\circ}C$ $\pm$1$^{\circ}C$, 3$0^{\circ}C$$\pm$1$^{\circ}C$, 60%$\pm$5% of relative humidity and 14L : 10D, to investigate their ecological characteristics, as comparing with control(29$^{\circ}C$$\pm$1$^{\circ}C$, 60%$\pm$5% of relative humidity and red light). As a result, eggs were laid by foundation queen at 15$^{\circ}C$, but they didn't hatched out while at 2$0^{\circ}C$ eggs were laid by them and they hatched out. When a foundation queen laid eggs at $25^{\circ}C$ and they all were hatched out and normally grown. Finally they were developed to the normal colony. B. ignitus worker survived for 77days at 2$0^{\circ}C$, about 69days at $25^{\circ}C$, about 68days at 3$0^{\circ}C$ and about 63days at 29$^{\circ}C$(control). The first brood workers emerged in 25-27days from the egg which a foundation queen laid. At the various temperatures, the captive queens stand to lay eggs in about 18days at 15$^{\circ}C$, 15days at 2$0^{\circ}C$, 11days at $25^{\circ}C$, 11days at 3$0^{\circ}C$ and 4days in control. The first worker and the first drone from the egg cell of the collected queens appeared in about 27days and 72days at 2$0^{\circ}C$, 26days and 88days in $25^{\circ}C$, 24days and 65days at 3$0^{\circ}C$, 25days and 71days in control, respectively. In colony foundation, 33% of the collected queen at 2$0^{\circ}C$ and $25^{\circ}C$, 100% of the disposed queen at 3$0^{\circ}C$ and in control, and 67% of them at 3$0^{\circ}C$ and in control both produced new queens in 66days and 88days, respectively. The life span of the colony founded covered fro about 3 months at $25^{\circ}C$, 3$0^{\circ}C$ and in control. At lower temperatures, the life span of queen is shorter; 2 months at 15$^{\circ}C$ and 3 months at 2$0^{\circ}C$, respectively. A colony which normally developed, varied in size with rearing temperatures; about 20heads at 2$0^{\circ}C$, 482heads at $25^{\circ}C$, 330heads at 3$0^{\circ}C$ and 452heads in control. A foundation queen monthly oviposited 1.5egg cells at 15$^{\circ}C$, 3.0egg cells at 2 $0^{\circ}C$, 21.7egg cells at $25^{\circ}C$, 42.3egg cells at 3$0^{\circ}C$ and 47.0egg cells in control. As a colony developed in June and July, egg cells as well as daily average cells increased in number, as compared to those in May and August. Also, in June and July, interval(days) of egg laying is shorter than in May and August. Number of nectar pots during the colony development varied with rearing temperatures; 31pots at $25^{\circ}C$, 39pots at 3$0^{\circ}C$, 23pots in control. The emergence of new queen showed a distinctively different two patterns; early emerging type and late emerging type. Workers are rapidly increased from early in July to early in August at $25^{\circ}C$, but at 3$0^{\circ}C$ and in control, emergence of workers are remarkably increased from the middle of June and last until July. No new queen emerged at 15$^{\circ}C$, 2$0^{\circ}C$ and $25^{\circ}C$. New queens at 3$0^{\circ}C$ and in control emerged between late in June and early in July. Thus emergence of new queen was temperature dependent.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.89-97
• /
• 2007

A three-dimensional (3D) magnetotelluric (MT) survey has been carried out to delineate subsurface structures and possible fractures, for development of low-temperature geothermal resources in Pohang, Korea. Quite good quality MT data could be obtained throughout the survey region by locating the remote reference in Kyushu, Japan, which is ${\sim}480\;km$ from the centre of the field site. 3D modelling and inversion are performed taking into account the sea effect in MT measurements near the seashore. The nearby sea in the Pohang area affects MT data at frequencies below $1\;Hz{\sim}0.2\;Hz$, depending on the distance from the seashore. The most severe sea effects were observed in the south-east parts of the survey area, closer to Youngil Bay. 3D inversion with and without the seawater constraint showed very similar results at shallow depths, roughly down to 2 km. At greater depths, however, a strong sea effect seems to form a fictitious conductive structure in ordinary 3D inversion, especially in the south-eastern part of the survey region. Comparison between drilling results and the resistivity profiles from inversions showed that five layered structures can be distinguished the subsurface beneath the target area. They are: (a) semi-consolidated mudstones with resistivity less than $10\;{\Omega}m$, which are ${\sim}300\;m$ thick in the northern part and ${\sim}600\;m$ thick in the southern part of the survey area; (b) occasional occurrence of trachybasalt and lapilli tuff within the mudstone layer has resistivity of a few tens of${\Omega}m$, (c) intrusive rhyolite ${\sim}400\;m$ thick has resistivity of several hundreds of ${\Omega}m$, (d) alternating sandstone and mudstone down to 1.5 km depth shows resistivity of ${\sim}100\;{\Omega}m$, (e) a conductive structure was found at a depth of ${\sim}3\;km$, but more geological and geophysical study should be carried out to identify this structure.