• 제목/요약/키워드: B.t. H-14

검색결과 394건 처리시간 0.028초

$Imperatorin[C_{16}H_{14}O_4]$의 결정 및 분자구조 (The Crystal and Molecular Structure of $Imperatorin[C_{16}H_{14}O_4]$)

  • 김문진;신준철;이재혁;김대영;장성근;이윤배;이종수
    • 한국결정학회지
    • /
    • 제9권2호
    • /
    • pp.114-119
    • /
    • 1998
  • Imperatorin, 9-[(3-methyl-2-butenyl)oxy]-7H-furo[3,2-g][1]benzopyran-7-one의 분자 및 결정구조를 X-선 회절법으로 연구하였다. 이 결정의 분자식은 C16H14O4, 결정계는 삼사정계이고 공간군은 P이다. 단위포상수는 a=11.818(1) , b=11.906(1) , c=11.059(1) 이며, α=96.32(1)o, β=90.74(1)o, γ=64.88(1)o, V=13.993(2) 3, T=293 K, Z=4이다. 구조해석에 사용한 X-선은 CuKα선(λ=1.5418 )을 사용하였다. 구조는 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종 신뢰도 R 값은 F0>4σ(F0)인 3951개의 독립회절데이타로 356개 파라메타에 대해 R=7.02%이다.

  • PDF

전기방사 공정을 이용하여 1차원 Nd2Fe14B섬유로부터의 Nd2Fe14B 자석분말 합성 (Synthesize of Nd2Fe14B Powders from 1-D Nd2Fe14B Wires using Electrospinning Process)

  • 엄누시아;노수;학 무하마드 아닉;김범성
    • 한국분말재료학회지
    • /
    • 제26권6호
    • /
    • pp.477-480
    • /
    • 2019
  • Magnetic 0-D Nd2Fe14B powders are successfully fabricated using 1-D Nd2Fe14B nanowire formed by an efficient and facile electrospinning process approach. The synthesized Nd-Fe-B fibers and powders are investigated for their microstructural, crystallographic, and magnetic properties according to a series of subsequent heat treatments. Each heat-treatment process leads to the removal of organic impurities and the formation of the respective oxides/composites of Nd, Fe, and B, resulting in the formation of Nd2Fe14B powders. Nd-Fe-B fibers exhibit the following magnetic properties: The coercivity (Hci) of 3260 Oe, a maximum magnetization at 3T of 109.44 emu/g, and a magnetization remanence (Mr) of 44.11 emu/g. This process easily mass produces hard magnetic Nd2Fe14B powders using a 1-D synthesis process and can be extended to the experimental design of other magnetic materials.

Fe73.5Cu1Nb3Si15.5B7나노 결정립 합금 분말 코아의 자기적 특성 (The Magnetic Properties of Nanocrystalline Fe73.5Cu1Nb3Si15.5B7 Alloy Powder Cores)

  • 노태환;최혁열;안상재
    • 한국자기학회지
    • /
    • 제14권1호
    • /
    • pp.7-12
    • /
    • 2004
  • F $e_{73.5}$C $u_1$N $b_3$S $i_{15.5}$ $B_{7}$ 비정질 리본 합금을 490∼61$0^{\circ}C$의 온도 범위에서 열처리하고 이를 볼 밀링 하여 얻은 250∼850$\mu\textrm{m}$크기의 자성분말과 5wt%의 세라믹 절연체로 구성된 분말 코아의 자기적 특성에 열처리 온도가 미치는 영향을 조사하였다. 5$50^{\circ}C$에서 1 h동안 열처리하여 직경 11 nm의 $\alpha$-Fe상 나노 결정립 구조로 되었을 때(전기비저항은 110$\mu$$.$cm)가장 높은 실효투자율 및 품질계수를 나타내었으며 그 값은 각각 125와 53이었고, 실효투자율의 경우 약 500 KHz에 이르기까지 일정한 크기를 유지하였다. 그리고 이 열처리 조건에서 230 mW/㎤(f=50 KHz, $B_{m}$ =0.1 T)의 대단히 낮은 자심손실을 나타내었다. 그러나 이 합금의 분말 코아는 종래의 분말 코아 재료(MPP,센더스트 등)에 비해 그리 우수하지 못한 직류 바이어스 특성 특히 저 자장 하에서의 낮은 퍼센트 투자율을 나타내었는데, 이는 종래의 소재와 유사한 투자율을 얻는데 너무 큰 입도의 분말이 필요한 것에 그 원인이 있는 것으로 이해되었다.

강원도산(江原道産) 소나무천연림생태계(天然林生態系)의 Biomass 및 Net Primary Production에 관(關)한 연구(硏究) (Biomass and Net Primary Productivity of Pinus densiflora Natural Ecosystem in Kangwondo, Korea)

  • 이수욱
    • 한국산림과학회지
    • /
    • 제71권1호
    • /
    • pp.74-81
    • /
    • 1985
  • 강원도산(江原道産) 소나무천연림(天然林)의 생산성(生産性)을 파악(把握)하기 위하여 10본(本)의 표본목(標本木)을 벌도(伐倒)하고 각(各) 부위별(部位別) 및 총(總) biomass와 biomass 추정방정식(推定方程式) 모형으로는 $Wt=aD^bH^c$가 가장 적합(適合)하였다. 2) 임분(林分) biomass 추정량(推定量)은 지상부(地上部) 총량(總量)이 198.82 t/ha였으며 부위별(部位別)로는 수간목부(樹幹木部)가 136.82 t/ha, 생지부(生枝部)가 32.81 t/ha, 수피부(樹皮部)가 10.72 t/ha 엽량(葉量)이 9.07 t/ha 죽은가지가 7.30 t/ha 였다. 3) 순생산량(純生産量)은 지상부총량(地上部總量)이 15.87 t/ha/yr였으며 부위별(部位別)로는 수간목부(樹幹木部)가 7.04 t/ha/yr., 생지부(生枝部)가 4.91 t/ha/yr., 엽량(葉量)이 2.21 t/ha/yr., 소지(小枝)가 1.13 t/ha/yr., 수피(樹皮)가 0.52 t/ha/yr 였다. 4) Leaf efficiency는 1.876으로서 연간지상부(年間地上部) 총생산량(總生産量) 15.87 t/ha/yr와 비교적 잘 연관되어 있다.

  • PDF

비정질 TbFeCo 합금 증착박막의 자기광학효과 (Magneto-optic effect of thermal evaporated amorphous TbFeCo thin flim)

  • 박용관;양계준
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제5권4호
    • /
    • pp.439-445
    • /
    • 1992
  • 최근 광자기 기록매체로 주목받고 있는 RE-TM계 비정질 박막을 T $b_{x}$ (F $e_{0.9}$ $Co_{0.1}$)$_{100-x}$ (x=14, 17, 20, 23, 27[at%])의 조성비를 갖는 모합금을 만든후 진공증착방법으로 합금박막을 제작하였다. 각시료의 조성에 따른 자기광학효과를 알아보기 위하여 80K부터 600K에서 포화자화( $M_{s}$ )와 보자력( $H_{c}$)에 대한 온도의존성과 자기이방성상수(Ku), Polar Kerr 이력곡선을 측정하였다. 또한 Curie 온도 근처에서 열처리 시간에 따른 자기 토크 곡선의 변화를 분석 함으로써 합금박막 표면의 산화정도를 정성적으로 평가할 수 있었다. 실험결과 T $b_{22.72}$(F $e_{68.78}$ $Co_{8.5}$)인 시료가 상온에서 8.4KOe의 보자력을 가졌으며 T $b_{x}$(x=23[at%])인 경우가 가장 큰 수직자기이방성을 나타냈다. Polar Kerr 이력곡선은 Tb함량 x=25~26[at%]에서 부호가 반전됨을 알 수 있었다.다.다.다.

  • PDF

한우 거세우의 사회 행동에 공간 허용이 미치는 영향 (Effects of space allowance on the social behavior of Korean native cattle (Bos taurus coreanae) steers)

  • 한지훈;전중환;김동주;장홍희;구자민;김영기;이스캇;김은정;이희천;이효종;연성찬
    • 대한수의학회지
    • /
    • 제45권2호
    • /
    • pp.245-250
    • /
    • 2005
  • This study was carried out to find out how space allowance affect the social behavior of Korean native cattle (Bos taurus coreanae) steers. Twelve Korean native cattle (Bos taurus coreanae) steers were used as subjects, each of which was 30-month-old and observation period was from June to July 2003. Five (T1) and seven (T2) steers were allotted to two pens of $5m{\times}10m$ in a building with slate roof and open sides respectively. They were fed at 09:00 h and 16:00 h, twice a day. The behaviors of steers were recorded from 06:00 h to 17:00 h, using two color CCD cameras (Samsung SDC-411, Korea), one B/W CCD cameras (Samsung SBC-340, Korea), one multiplexer (Samsung SDM-081, Korea) and a time lapse VCR (Samsung SRV-30, Korea). The behaviors of each steer were recorded every 2 min using an instantaneous point sampling method. While the mean percentage of time budget in WA of T1 was lower than that of T2 (p<0.05), the mean percentage of time budget in SF of T1 was higher than that of T2 (p<0.05). When it gets hot, steers in T1 rested from 10:00 h to 14:00 h when it gets cool, showing 40~80% of LD rate while steers in T2 rested from 12:00 h, when it very hot to 17:00 h, showing 20~50% of LD rate, which is relatively low. Steers in T1 were fed from 06:00 h to 08:00 h when it was cool and from 16:00 h to 18:00 h, showing 20~45% of EA rate while steers in T2 were fed from 08:00 h to 14:00 h when it was hot, showing 25~50% of EA rate. In conclusion, it turned out that the number of steers affected their social behavior, and T1 was better environment than T2 in terms of welfare.

치과용 스케일러 금형의 분말사출성형 CAE 해석설계 (CAE Analysis of Powder Injection Molding Process for Dental Scaler Mold)

  • 고영배;박형필;정성택;이병옥;황철진
    • 소성∙가공
    • /
    • 제14권6호
    • /
    • pp.570-576
    • /
    • 2005
  • Powder Injection Molding(PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry With this regards, design technology of dental scaler tip PIM mold, which has complex shape and small core pin (diameter=0.6mm), with the help of computer-aided analysis of powder injection molding process was developed. Computer-aided analysis for dental scaler tip mold was implemented by finite element method with non-Newtonian fluid, modified Cross model viscosity, PvT data of powder/binder mixture. Compter-aided analysis results, such as filling pattern, weldline formation, air vent position prediction were compared with experimental result, and eventually have been shown good agreement. The core pin (diameter=0.6mm) deflection analysis of dental scaler tip PIM mold during PIM filling process was also investigated before mold fabrication.

에코나졸 나이트레이트의 구조 (The Structure of Econazole Nitrate)

  • 서일환;조성일;박권일
    • 한국결정학회지
    • /
    • 제1권1호
    • /
    • pp.14-18
    • /
    • 1990
  • Econazole nitrate, 1-{2-[(4-chlorophenyl)methoxy]-2-(2,4-dichlorophenyl) ethy1}-1H-imidazole mono-nitrate, C18 H16 CI13 N3 O4의 단위세포 상수는 a=19.337(4) A, b=15.191(5) A c=7.601(3)A, β=91.72(2)μ V=2000.0A3 Do=1.49g/ml Dm=1.47g/ml, M=4.31cm-1 F(000)=912.0, 2T=298K,공간군은 P2₁/C이고 단사 정계이며 Z=4이다. λ=(Mo-Ka)=0.7107 A을 사용한 1330개의 Intensity data에 대해 최종 R값은 0.06이다. Econazole nitrate의 각 세 ring은 각각 평면이며 B,A,C ring순서로 층계를 이루고 있다. 반면에 Econazole의 A와 C ring은 거의 같은 평면에 누워 있으나 B ring 은 거의 같은 평면이며 B,A,C ring순서로 층계를 이루고 있다.반면에 Econazole의 A와 C ring은 거의 같은 평면에 누워있으나 B ring과는 약 60˚의 평면각을 이루고 있다. Nitrate의 O(*3)와 Imidaze의 N(2) 사이의 수소결합은 Econazole slt의 안정화에 기여한다.

  • PDF

Exosomes from Murine-derived GL26 Cells Promote Glioblastoma Tumor Growth by Reducing Number and Function of CD8+T Cells

  • Liu, Zhi-Ming;Wang, Yu-Bin;Yuan, Xian-Hou
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제14권1호
    • /
    • pp.309-314
    • /
    • 2013
  • Aim: Brain tumors almost universally have fatal outcomes; new therapeutics are desperately needed and will only come from improved understandins of glioma biology. Methods: Exosomes are endosomally derived 30~100 nm membranous vesicles released from many cell types. Examples from GL26 cells were here purified using density gradient ultracentrifugation and monitored for effects on GL26 tumor growth in C57BL/6j mice (H-2b). Lactate dehydrogenase release assays were used to detect the cytotoxic activity of CD8+T and NK cells. Percentages of immune cells producing intracellular cytokines were analyzed by FACS. Results: In this study, exosomes from murine-derived GL26 cells significantly promoted in vivo tumor growth in GL26-bearing B6 mice. Then we further analyzed the effects of the GL26 cells-derived exosomes on immune cells including CD8+T, CD4+T and NK cells. Inhibition of CD8+T cell cytotoxic activity was demonstrated by CD8+T cell depletion assays in vivo and LDH release assays in vitro. The treatment of mice with exosomes also led to a reduction in the percentages of CD8+T cells in splenocytes as determined by FACS analysis. Key features of CD8+T cell activity were inhibited, including release of IFN-gamma and granzyme B. There were no effects of exosomes on CD4+T cells and NK cells. Conclusion: Based on our data, for the first time we demonstrated that exosomes from murine derived GL26 cells promote the tumor growth by inhibition of CD8+T cells in vivo and thus may be a potential therapeutic target.

공중 통신망의 E.164 번호체계와 루팅 (Analysis on the International Standardization Activites in Japan)

  • 김상현;송호영;홍성백
    • 전자통신동향분석
    • /
    • 제14권4호통권58호
    • /
    • pp.23-41
    • /
    • 1999
  • 활성화된 PSTN/N-ISDN 망과 B-ISDN망에서 공중망의 번호체계로 사용하는 ITU-T E.164에 대하여 각 망에서의 번호체계 및 번호사용방법(Dialing Plan)을 비교, 검토하고, B–ISDN 망의 E.164 번호계획(Addressing/Numbering Plan)/번호사용방법이 PSTN/N-ISDN 망과는 다른 방법으로 적용하여야 하는 이유 및 방법과, 호처리시 착신번호와 함께 루팅에 사용되는 중계망 선택기능을 위한 망 식별번호(Network Identification)가 망의 번호체계와의 연관성을 살펴보기 위하여 본 고에서는 PSTN/N-ISDN 망과 B-ISDN 망의 E.164 번호계획과 번호사용방법, 중계망 선택기능에 대하여 기술하고, 기존 통신망과의 서비스 연동을 위한 E.164 번호체계에서 B-ISDN 망의 식별번호 사용에 대하여 기술하고자 한다.