• Bulletin of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.363-367
• /
• 1992

The crystal structure of (1,3,6,9,11,14-hexaazatricycol[12.2.1.$1^{6,9}$]octadecane)copper(Ⅱ) perchlorate, Cu($C_{12}H_{26}N_6$)$(ClO_4)_2$, has been determined by the X-ray diffraction methods. The crystal data are as follows: Mr=516.9, triclinic, ${\alpha}=8.572\;(2)$, b=8.499 (3), c=15.204 (3) ${\AA}$, ${\alpha}=80.42\;(5),\;{\beta}=73.57\;(3),\;{\gamma}=69.82\;(4)^{\circ},\;V=994.2\;{\AA}^3,\;D_C=1.726\;gcm^{-3}$, space group $P{\tilde{1}},\;Z=2,\;{\mu}=21.27\;cm^{-1}&, F(000)=534 and T=297 K. The structure was solved by direct methods and refined by full-matrix least-squares methods to and R value of 0.081 for 1608 observed reflections measured with graphite-mono-chromated Mo Ka radiation on a diffractometer. There are two independent complexes in the unit cell. The two copper ions lie at the special positions (1/2, 0, 0) and (0, 1/2, 1/2)and each complex possesses crystallographic center of symmetry. Each Cu ion is coordinated to four nitrogen donors if the hexaazamacrotricyclic ligand and weakly interacts with two oxygen atoms of the perchlorate ions to form a tetragonally distorted octahedral coordination geometry. The Cu_N (sec), Cu_N(tert) and Cu_O coordination distances are 1.985 (14), 2.055 (14) and 2.757 (13) ${\AA}$ for the complex A and 1.996 (10), 2.040 (11) and 2.660 (13) ${\AA}$ for the complex B, respectively. The macrocycles in the two independent cations assume a similar conformation with the average r.m.s. deviation of 0.073 ${\AA}$. Two 1,3-diazacyclopentane ring moieties of the hexaazamacrotricyclic ligand are placed oppositely and almost perpendicularly to the square coordination plane of the ruffled 14-membered macrocycle. The secondary N atoms are hydrogen-bonded to the perchlorate O atoms with distances of 3.017 (23) and 3.025 (19) ${\AA}$ for the complexes A and B, respectively.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.1
• /
• pp.10-14
• /
• 2008

Differently from BSCCO tapes which are fabricated by powder-in-tube method, the coated conductors are made by the evaporation of YBCO on metal substrate. Due to this structural merit, although the coated conductors are generally used for large current transportation, they are expected to be favorable to the purpose of the fault current limitation as well. In this study, using YBCO coated conductor having copper stabilizer formed by plating technique(produced by Superpower Co.), we investigated the over-current characteristics of the coated conductor. The coated conductors had 85 A $I_c$ and 90 K $T_c$. The resistance of the conductor was 0.93 $m{\Omega}/cm$ at 300 K and 0.17 $m{\Omega}/cm$ at the temperature right above $T_c$. To the coated conductors, we applied the voltages of the range from 150 $V_{rms}$ to 230 $V_{rms}$ and measured the V-I curves using four probe method. From the results, we could analyze the electric behavior of the coated conductor in flux flow state. As the current exceed $I_c$, the currents were distributed into the superconductor and metal stabilizer. The amounts of the currents shared through both current paths were calculated under the assumption that the ,Joule heating was perfectly eliminated by $LN_2$ surrounding the conductor. Finally, the condition for the stable current flowing state which does not affect the conductor was established from the analysis on the over-current characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.641-645
• /
• 1995

This study was conducted to develop a method for production of nuclear transplant bovine embryos using in vitro-matured (IVM) oocytes and to examine the effect of different conditions of electrofusion on fusion rate and developmental capacity of donor nucleus transplanted to enucleated oocytes. Eight- to sixteen-cell embryos derived from oocytes matured and fertilized in vitro used as donor blastomeres and IVM oocytes were used as recipient oocytes. Oocytes were enucleated immediately after 23-24 h IVM and then reconstituted with a donor blastomere in two different micromanipulation media. Fusion rate and subsequent development of the reconstituted oocytes was compared under the different electric stimuli and recipient oocyte ages. Success rate of enucleation was significantly higher in TCM-199 medium containing FCS than in DPBS. The high fusion rate(75-94%) and development (6.4-14.8%) to morulae and blastocyst (M + B) were obtained from 0.6-0.75 kV/cm DC voltage, although total cleavage was not different among the electric pulses. Most optimal condition of electric stimulation for fusion and development was 1 DC voltage of 0.75 kV/cm, in which 80.5% of oocytes were fused, 80.0% and 31.7% of which was cleaved and developed to M + B, respectively. No M + B was obtained from 1.2 kV/cm DC voltage regardless of pulse frequency. Recipint oocyte age at electrofusion greatly affected the cleavage and subsequent development to M + B, showing high rate at 40-41 h oocyte maturation. These results suggest that a suitable condition of electrofusion for donor nuclei derived from IVF may be 1-2 DC pulses of 0.7 kV/cm for $70{\mu}sec$ and that processing of a transplanted nucleus in IVM oocytes may be affected by maturation age of recipient oocytes.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.756-762
• /
• 2011

This study was conducted to investigate the effects of moisture content on microbiological stability and texture characteristic of dry-cured ham. The moisture content of dry-cured hams was adjusted to 35% (C) or 45% (T) and then vacuumpackaged after slicing to a 1 inch thickness. All packaged dry-cured hams were stored at $10^{\circ}C$ for 3 mon, and physicochemical analyses and a sensory evaluation were conducted to verify the quality of dry-cured hams during four different storage periods. Moisture content was significantly higher in T (44.89%) compared to that in C (35.03%). However, crude fat content was higher in C (14.08%) than that in T (11.11%). The pH, salinity, and shear force were higher in C than those in T, and dry-cured hams derived from C seemed to provide low lipid oxidation stability during storage. In contrast, T showed high CIE $L^*$, CIE $a^*$ and CIE $b^*$, and aw values when compared to dry-cured hams from C. Total plate counts and Lactobacillus tended to increase with the increase in storage period, and both were lower in T than those in C after 1 mon of storage. Our results indicate that 45% moisture content improved dry-cured ham quality as compared to that of dry-cured hams containing 35% moisture.

• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.215-221
• /
• 2013

The objective of this study was to evaluate the changes in the physicochemical and microbiological characteristics of pork loin meat through microwave treatment. The microwave treatment was divided into two groups: continuing microwave treatment (CW) and holding microwave treatment (HW). The microwave treatment resulted in a whiter color (L value) and affected the a, b value. The initial pH was 5.51~5.74, but it increased to 6.32~6.51 when the pork loin samples were stored for three days. During storage for 14 days, the pH changes were not significantly different (p>0.05). The thiobarbituric-acid values of all the pork loin samples increased along with the storage period, and decreased with increasing microwave dose. The volatile basic nitrogen (VBN) content of the control was higher than those of the other samples, and the VBN content decreased along with the microwave dose. The total plate counts of the pork loin samples decreased with increasing microwave dose. The study results indicated that T2 (100 W, HW) is most effective for the safety of pork loin meat without decreasing the meat's physicochemical and microbiological characteristics.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.416-420
• /
• 1995

An attempt has been made to investigate the mechanism of magnetic alignment in the magnets produced by upset forging the $Pr_{20}Fe_{74}B_{4}Cu_{2}$ cast bulk alloy. Upset forging of the cast alloy was carried out for 20 sec to an 80 % thickness reduction (strain rate : $4{$\times}10^{-2}s^{-1}$) in an open die configuration at varying temperatures in the range $600^{\circ}-900^{\circ}C$. It has been found that the upset forging process at temperatures above $800^{\circ}C$ can achieve a magnetic alignment to a great extent from copper-containing Pr-Fe- B-type cast ingot. The growth manner of the ferromagnetic $Pr_{2}Fe_{14}B$ matrix grain in Pr-Fe-B-type alloys was studied by examining the morphology change of the matrix grain in sintered body, and it was found that the matrix grains grew in anisotropic manner such that the grain grew more rapidly along the a- or b-axis than along the c-axis. This anisotropic grain growth led to the plate-like shape of the matrix grain. The magnetic alignment during the upset forging was attributed to grain boundary gliding of the plate-like grains, and the geometry of the grains in the cast ingot and the presence of a large amount of the praseodymium-rich grain boundary phase were thought to play a key role in the achievement of magnetic alignment.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.201-206
• /
• 2012

Horse manure general composition and contaminants, heavy metals content analysis was investigated as follows. The moisture content of horse feces was 76.1% and 96% for horse urine. The average T-N, T-P, T-K concentrations of the racing horse were 0.18%, 0.10%, 0.22% respectively and 2.88%, 0.0015%, 0.84% for urine. And the average BODs, COD, SS concentrations were 26,906 $mg/{\ell}$, 36,642 $mg/{\ell}$, 89,375 $mg/{\ell}$ respectively and 14,298 $mg/{\ell}$, 7,484 $mg/{\ell}$, 6,987 $mg/{\ell}$ for urine. In addition, the Cr, Cu, Ni, Cd, Pb, Zn concentrations of feces were 2.65 mg/kg, 7.05 mg/kg, 1.24 mg/kg, 0.07 mg/kg, 0.01 mg/kg, 45.11 mg/kg respectively and 1.52 mg/kg, 1.62 mg/kg, 0.00 mg/kg, 0.03 mg/kg, 0.03 mg/kg, 4.49 mg/kg for urine on the fresh matter basis. The end of the survey was that the quality of the compost can be used as a raw material, and manure is necessary to constantly driven forward horse manure composting research.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.349-354
• /
• 2004

Predictive growth model of Vibrio parahaemolyticus in modified surimi-based imitation crab broth was investigated. Growth curves of V. parahaemolyticus were obtained by measuring cell concentration in culture broth under different conditions ($Initial\;cell\;level,\;1{\times}10^{2},\;1{\times}10^{3},\;and\;1{\times}10^{4}\;colony\;forming\;unit\;(CFU)/mL$; temperature, 15, 25 37, and $40^{\circ}C$; pH 6, 7, and 8) and applying them to Gompertz model. Microbial growth indicators, maximum specific growth rate (k), lag time (LT), and generation time (GT), were calculated from Gompertz model. Maximum specific growth rate (k) of V. parahaemolyticus increased with increasing temperature, reaching maximum rate at $37^{\circ}C$. LT and GT were also the shortest at $37^{\circ}C$. pH and initial cell number did not influence k, LT, and GT values significantly (p>0.05). Polynomial model, $k=a{\cdot}\exp(-0.5{\cdot}((T-T_{max}/b)^{2}+((pH-pH_{max)/c^{2}))$, and square root model, ${\sqrt{k}\;0.06(T-9.55)[1-\exp(0.07(T-49.98))]$, were developed to express combination effects of temperature and pH under each initial cell number using Gauss-Newton Algorism of Sigma plot 7.0 (SPSS Inc.). Relative coefficients between experimental k and k Predicted by polynomial model were 0.966, 0.979, and 0.965, respectively, at initial cell numbers of $1{\times}10^{2},\;1{\times}10^{3},\;and\;1{\times}10^{4}CFU/mL$, while that between experimental k and k Predicted by square root model was 0.977. Results revealed growth of V. parahaemolyticus was mainly affected by temperature, and square root model showing effect of temperature was more credible than polynomial model for prediction of V. parahaemolyticus growth.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.2
• /
• pp.135-143
• /
• 2021

We report, for the first time, the afternoon (i.e., from noon to sunset time) observations of the northern mid-latitude E-region field-aligned irregularities (FAIs) made by the very high frequency (VHF) coherent backscatter radar operated continuously since 29 December 2009 at Daejeon (36.18°N, 127.14°E, 26.7°N dip latitude) in South Korea. We present the statistical characteristics of the mid-latitude afternoon E-region FAIs based on the continuous radar observations. Echo signal-to-noise ratio (SNR) of the afternoon E-region FAIs is found to be as high as 35 dB, mostly occurring around 100-135 km altitudes. Most spectral widths of the afternoon echoes are close to zero, indicating that the irregularities during the afternoon time are not related to turbulent plasma motions. The occurrence of afternoon E-regional FAI is observed with significant seasonal variation, with a maximum in summer and a minimum in winter. Furthermore, to investigate the afternoon E-region FAIs-Sporadic E (E_s) relationship, the FAIs have also been compared with E_s parameters based on observations made from an ionosonde located at Icheon (37.14°N, 127.54°E, 27.7°N dip latitude), which is 100 km north of Daejeon. The virtual height of E_s (h'E_s) is mainly in the height range of 105 km to 110 km, which is 5 km to 10 km greater than the bottom of the FAI. There is no relationship between the FAI SNR and the highest frequencies (f_tE_s) (or blanket frequencies (f_bE_s)). SNR of FAIs, however, is found to be related well with (f_tE_s-f_bE_s).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.458-462
• /
• 2005

This paper deal with the optimal lamination condition of cylindrical shell applied new composite URN300 for a study of composite empirical formula. Finite element analyses for isotropic materials considered element numbers and boundary conditions are compared with existing empirical formulas to apply FE analysis for composite. And composite tensile test is done to know the composite material applied FE analysis for composite. The results of FE analyses for isotropic materials have indicated that Optimal element number and boundary condition were 1600 and both simple support. These conditions were applied in composite FE analyses. Ply orientations and lamination patterns in FE analyses for composite were considered. Ply orientations are $0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;75^{\circ},\;and\;90^{\circ}$. Lamination patterns are $[\pm\theta/0/90]_{14s]$ and $[\pm\theta_{14}/0_{14}/90_{14}]_s$ in FE analysis. Lamination pattern $[\pm\theta_{14}/0_{14}/90_{14}]_s$ is the equivalent model of $[\pm\theta/0/90]_{14s}$. At the result of this study, the FE analyses for composite have indicated that the optimized ply orientation $75^{\circ}$ is and real model must use in FE analysis for accurate results.