• 대한방사선기술학회지:방사선기술과학
• /
• 제32권3호
• /
• pp.313-323
• /
• 2009

확산강조영상 (diffusion weighted image, DWI)은 급성 뇌경색, 뇌종양, 뇌백질 질환, 뇌 막질의 확산 정도 등 여러 뇌질환의 진단을 획기적으로 향상시켰으며 그 활용도가 증가하고 있다. 본 연구는 $10{\sim}60$대 환자들의 뇌를 대상으로 두 기법간의 신호강도, 현성확산계수의 평균치를 측정하였다. 그 결과, 확산강조영상에서의 신호강도 평균값은 편도체부 (amygdala)가 가장 높고, 뇌척수액(cerebrospinal fluid)에서 가장 낮았다. 현성확산계수의 평균값은 뇌척수액이 높고, 교뇌 (pons)가 낮게 측정되었다. 확산강조 신호강도와 현성확산계수의 평균값은 $T_2^*$-DW-EPI 기법이 FLAIR-DW-EPI 기법보다 높고, b-value의 변화에 따른 평균값은 두 기법의 b-value에 모두 반비례하였다. 또한 뇌경색환자의 뇌의 시간 경과에 따른 분석결과, 초급성뇌경색 환자의 일반적인 MR 영상에서는 병변부분이 명확하지 않았으나 확산강조영상에서는 고신호강도로 나타났다. 출혈성 뇌경색, 급성 뇌경색 등 여러질환별로 분석한 결과 그 두 기법의 특성에 따라 신호강도의 값이 차이가 클수록 현성확산계수는 낮게 나타났다. 결론적으로 뇌 질환이 자주 발생되는 부위와 뇌 질환의 확산강조 신호강도 및 현성확산계수 값은 b-value의 변환과 영상기법에 따라 각각 다르게 나타났다. 이러한 정량적인 결과를 바탕으로 보다 안정적인 기법과 적절한 b-value 값을 이용하여 검사를 한다면 여러 뇌의 질환 및 병변 등을 발견, 판독하는 것뿐만 아니라 정상부위나 질환에 따른 기법별 신호의 인지를 통한 정확한 질병 진단과 치료에 중요한 의미가 있다고 사료된다.

• 열처리공학회지
• /
• 제5권3호
• /
• pp.149-156
• /
• 1992

Transformation behavior and reversible shape memory effct of Ti-Ni-Cu alloys with various Cu content has been investigated by means of electrical resistivity measurement, differential scanning calorimetry. X-ray diffraction and strain gage sensor. The transformation sequence in Ti-Ni-Cu alloys substituted by Cu for Ni up to 5at.% occurs to $B2{\leftrightarrow}B19^{\prime}$ and it proceeds in two stages by addition of 10 at.%Cu. i.e. $B2{\leftrightarrow}B19{\leftrightarrow}B19^{\prime}$. But the content of Cu increases up to 20at.%, it has been transformed in one stage ; $B2{\leftrightarrow}B19$. The shape change of Ti-40Ni-10Cu alloy which was constrain aged in circular form bended in $B2{\leftrightarrow}B19$ transformation but it spreaded out in $B19{\leftrightarrow}B19^{\prime}$ transformation. The amount of reversible shape change (${\Delta}{\varepsilon}$) of Ti-47Ni-3Cu alloy constrain aged at $400^{\circ}C$ after solution treatment has a maximum value of about $5.6{\times}10^{-3}$, but that of cold rolled and constrain aged specimens exhibits a little value independent of Cu concentrations.

• 산업식품공학
• /
• 제15권1호
• /
• pp.85-89
• /
• 2011

Freeze-dried Ecklonia cava powder was incorporated into cookie dough at 5 levels (0%, 1.5%, 3%, 4.5%, and 6%, w/w) by replacing equivalent amount of wheat flour of the cookie dough. After aging and sheeting, cookies were baked at $185^{\circ}C$ for 14 min in a convection oven. The baked cookies were cooled to room temperature for 30 min and packed in airtight bags prior to all measurements. Lightness $(L^*)$ decreased significantly as the E. cava powder content increased (p<0.05) and a decreasing trend in both redness ($a^*$-value) and yellowness ($b^*$-value) was observed. On the other hand, firmness increased significantly with an increase in E. cava powder content (p<0.05). Increases in E. cava powder concentration up to 6% in the cookie formulation significantly increased the intensities of all sensory attributes such as color, flavor, taste, and firmness (p<0.05). Correlation analysis indicated that the E. cava concentration correlated significantly with most of the properties except for $a^*$-value (p<0.01, 0.05, or 0.001). Properties such as firmness and sensory color and firmness correlated positively while $L^*$- and $b^*$-value correlated negatively with E. cava concentration. Sensory color correlated negatively with $L^*$- and $b^*$-value. Sensory firmness correlated positively with mechanically measured firmness.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권7호
• /
• pp.104-112
• /
• 2019

3D 프린팅용 시멘트 복합체 모르타르의 재료적 특성을 평가하고 굳지 않은 상태에서의 모르타르 간극비를 단일지표로 하여 프린팅이 가능한 성능 범위를 산출하였다. 시험 결과, W/B가 증가하면 모르타르 흐름값은 증가하였으며 밀도와 강도는 감소하였다. SS/B가 증가하면 모르타르 흐름값은 감소하였다. 그러나 강도와 밀도는 특정 SS/B까지 증가하다 감소하였다. Ad/B가 증가할수록 모르타르 흐름값, 밀도, 강도는 감소하였다. 이러한 경향성은 따른 3D 프린팅용 모르타르의 목표 성능 만족하기 위한 배합설계를 어렵게 한다. 한편, 간극비가 증가할수록 모르타르 흐름값은 비례적으로 증가하는 반면 밀도와 강도는 감소하는 경향을 보였으며, 그 상관성은 높게 나타났다. 이는 배합설계에 따른 재료적 특성을 제어하는 단일지표로서 간극비를 활용할 수 있음을 나타낸다. 3D 프린터로 출력 가능한 모르타르 배합범위를 시험한 결과, 간극비가 0.6~0.7일 때 출력이 가능하였다. 이를 검증하기 위해 W/B 35.0 %, SS/B 60.0 %, Ad/B 0.1%를 배합하여 간극비를 0.634로 설계했을 때 출력이 가능하였다. 그러나 3D 프린팅 출력 모르타르의 품질을 향상하기 위해서는 혼화제를 활용하는 추가적인 연구가 필요하다.

• 분석과학
• /
• 제16권6호
• /
• pp.443-449
• /
• 2003

붕산수에 대한 열중성자 (thermal neutron) 조사실험을 하나로를 이용하여 다음과 같은 세가지 조건에서 수행하였다: (A) $^{10}B$ 농도 = $203.0{\mu}g/mL$, 조사시간 = 1 시간; (B) $^{10}B$ 농도 = $381.4{\mu}g/mL$, 조사시간 = 1 시간; (C) $^{10}B$ 농도 = $381.4{\mu}g/mL$, 조사시간 = 0.5 시간. 열중성자 조사 시 발생하는 핵반응 [$^{10}B(n{\cdot}{\alpha})^7Li$]으로부터 생성된 $^7Li$의 양은 불꽃 없는 원자흡수분광분석법 (flameless atomic absorption spectroscopy)으로 측정하였다. (A), (B), (C) 실험에서 측정된 $^7Li$의 농도는 각각 0.18 (이론치 = 0.23), 0.31 (이론치 = 0.44), 0.16 (이론치 = 0.22) ${\mu}g/mL$로 이 값들은 각각 이론치의 78.3, 70.5, 71.6%에 해당한다 중성자 조사 후 붕산수의 pH는 조사 전의 값에 비하여 상당히 낮은 값을 보였다. 이는 물의 방사분해물의 영향으로 붕산수가 해리도가 큰 polyborate 형태로 전이되기 때문으로 판단된다.

• 경영과학
• /
• 제27권3호
• /
• pp.197-211
• /
• 2010

This research applies Blattberg's CE (customer equity) model to B2B business context. Through the model we estimate customer lifetime value of a Korean semiconductor manufacturer. The results show that Blattberg model has limiting applicability to B2B business context. To overcome the limits, several suggestions were made. The main suggestion was predicting maintenance costs for different customers groups and including decision variables regarding marketing costs that would help building a differentiated CE model for the B2B business context.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.11-16
• /
• 2006

It appraises that use an indoor noise standard, a NC value which is a noise appraisal, a dB(A) value, a N value in foreign country because it doesn't yet ready an appraisal standard in domestic. Also, It appraises that the supply and drainage noise which could change water supply pressure, $4kg/cm^2,\;3kg/cm^2,\;2kg/cm^2,\;1.5kg/cm^2,\;1kg/cm^2$, bring about a noise and inquires how does noise level indicates according to each instruments. In case of a water supply pressure standard, $3kg/cm^2$, a C-605is $3{\sim}5dB(A)$ lower than another instruments in directly overhead stories. It appears that all of them is similar to level in directly under level except c-407(2)Analyzed the NC value, c-605is the lowest level, NC-50, of a water supply pressure, $4.0kg/cm^2$, c-407 is the highest level, NC-55.(3) In case of N value, which is one of water supply methods in Japan, it is the lowest level, N-55, of a water supply pressure, $4.0kg/cm^2$ same as NC value and C-407is the highest level, N-60.(4) In case of water supply that is likely to noise level, It appears 6dB(A) level gap each instruments, and C-605 is the lowest level, 63.9dB(A).

• 동아시아식생활학회지
• /
• 제19권6호
• /
• pp.950-957
• /
• 2009

Mustard Leaf Kimchi (MLK) is a traditional fermented Korean vegetable food. This study was conducted to investigate the effects of part vacuum treatment on MLK packed in a glass bottle during fermentation. There have been a few previous studies that examined the chemical and microbial changes during MLK fermentation. However, the major object of this study was to investigate the antioxidative activities of vacuum treated MLK. In this study, the antioxidative activity of vacuum treated mustard leaf Kimchi (VM) and control mustard leaf Kimchi (CM) were examined. VM and CM were fermented at $5^{\circ}C$ for 8 weeks. A model system was designed to evaluate the antioxidative activity of crude chlorophylls and carotenoids (CCC) extracts from Mustard leaf Kimchi. The oxidative reaction of the linoleic acid mixture system at $30^{\circ}C$ in the dark was quantified determining the peroxide value and conjugated dienoic acid content. The effect of the CCC extracts on lipid peroxidation in a rat liver homogenate was examined. Formation of lipid peroxides was estimated by the TBA value, and the CCC extracts were found to inhibit the TBA value. Chlorophyll a and b, and carotenoids, Which are the major components in the CCC extracts of Kimchi were isolated on a DEAE-sepharose CL-6B and Sepharose CL-6B column and TLC. The effects of chlorophyll a and b, caroteins on linoleic acid autoxidation were measured by determining the peroxide value. In addition, their effects on free radical scavenging were investigated by DPPH. In this assay, chlorophyll a showed the greatest antioxidative activity followed by chlorophyll b, and carotenoids. MLK contains a sufficient content of chlorophyll a and b, and carotenoid which have strong antioxidative activities.

• 대한의생명과학회지
• /
• 제26권4호
• /
• pp.336-343
• /
• 2020

The present study was carried out to investigate the possibility that bispidinone derivative makes anticancer drug availability to human cervical carcinoma cell. The B8 has the lowest IC50 value among B8, B9 and B10 which are bispidinone analogue with bromide. According to cytotoxic test through WST-8 assay, B8 shows the most magnificent cytotoxicity effectiveness with 76 μM of IC50 value. In human cervical carcinoma cell treated with B8, it noticeably controlled cellular multiplication by increase of concentration and time. Furthermore, morphological changes like cellular shrink, disruption and nuclear condensation, feature of apoptosis, are observed. Annexin V-FITC/PI double staining assay test proved that B8 can cause apoptosis. Moreover, after treatment with 76 μM of B8, flow cytometry analysis shows that increase of active oxygen species are induced and membrane potential in mitochondria is decreased. Manifestation of Bcl-2 family and caspase cascades protein provides evidence that B8 induces apoptosis through mitochondria and caspase-related pathway. Taken together, we suggested that B8 reduced membrane potential in mitochondria and induce apoptosis through the pathway depended on mitochondria and caspase.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권1호
• /
• pp.1-4
• /
• 2006

The $MgB_2$ tapes with several metal powder addition were fabricated by PIT method with or without heat treatment. The $J_c$ value of $5.600A/cm^2$ and $16.000A/cm^2$ at 4.2 K and 5 T were obtained for the $MgB_2$ tape and 10 vol % of Cu added $MgB_2$ tape without heat treatment respectively. The $J_c$ value of $8.000A/cm^2$ and $35,000A/cm^2$ at 4.2 K and 5 T were obtained for the $MgB_2$ tape and 10 vol. % of Al added $MgB_2$ tape with heat treatment, respectively. The $J_c-B$ curve shows enhancement in $J_c$ under magnetic field. which suggests enhancement in workability and grain connectivity with several metal powder addition.