• 소성∙가공
• /
• 제18권1호
• /
• pp.59-66
• /
• 2009

In this study, V-notch part has been considered as one of safety components in rectangular cup used for mobile device. This kind of safety component in rectangular cup with the V-notch part, which controls adequately the increased internal pressure in the rectangular cup, plays an important role to prevent the explosion from the excessive internal pressure. The protecting mechanism on the mobile device against the explosion is that a series of fracture on the V-notch part at the critical internal pressure level occurs. Therefore, it is very crucial to estimate accurately the working pressure range of the safety device. Relationship between the working internal pressure and fracture phenomenon at V-Notch part was investigated through numerical analysis using ductile fracture criteria. Integral value, I, of the used ductile fracture criteria was calculated from effective stress and strain, and then the bursting pressure of the V-notch part was extracted. Comparisons between the estimated and experimental results show that this systematic approach to predict bursting pressure using the ductile fracture criteria gives fairly good agreements.

• 한국임상수의학회지
• /
• 제22권2호
• /
• pp.100-107
• /
• 2005

This study was carried out to investigate the physical and chemical properties of teat cup liners. The hardness of the liners was $50\~67$, and their fatigue to failure 38-1,185 cycles. The elongation and tensile strength of these liners were about $134 kgf/cm^2\;and\;473\%$, respectively. The infrared spectrum and the gas chromatogram revealed that the liner A was consisted of NR, SBR, and BR, with a composition ratio of 60:20:20 (part per hundred rubber). The raw rubber materials used for liners B to G, on the other hand, were NBR only. However, the liner H was made of silicon rubber. The thermogravimetric analysis showed that the liners tested in this study contained raw rubber material, carbon black, organic compounds and metallic compounds.

• 복식문화연구
• /
• 제23권1호
• /
• pp.24-31
• /
• 2015

The purpose of this study was to define Korean adolescent girls' brassiere size demand features in order to improve the suitability of junior brassieres for adolescent girls. The subjects for the data collection were Korean teenage girls from age 13 to 17 (n=492). Their body size was collected by conducting anthropometric measurement. The results of this study show that not only the growth of height, but also the growth of the body length is almost finished at the age of 15. The brassiere cup size, which shows the breast growth directly, increased remarkably at age 13 to 14, and once again at age 17. The demand for brassiere band size 70 appeared generally high among all ages. The research also suggests that the band size 60 and over 85 is also needed among the teenage girls. In matters of the brassiere cup size, junior brassieres over B-cup size are also necessary for teenage girls with big breasts to support their heavy breast weight. These results imply that the junior brassiere companies should improve their brassiere size range to fit the teenage girls' breasts properly.

• 복식
• /
• 제66권4호
• /
• pp.146-165
• /
• 2016

The aim of the study is to propose ways to improve the break line fit of women's tailored collar vests by modifying the patternmaking process. The study explored the fit effects of experimental vests with a focus on 3 different breast sizes, A, B, and C cups. Women in the ages between 20 and 24 in South Korea were targeted. In order to carry out the objective, the study implemented separate girth measurements for the front and the back of the tailored collar vests, and also allocated different dart amounts on the lapel through the break line according to the different breast cup sizes. The study adopted a 5-point rating scale to perform evaluation of the different fit effects caused by the varying dart amounts given on the experimental vests' break lines. This evaluation was carried out by apparel pattern experts. The results derived from the study were as follows: first, the implementation of separate girth measurements provided originality to the study, as the application of different measurements for the waist back length and the neck shoulder point-to-breast point-to-waist line led to the front panels of the experimental vests having varying slack amounts. Second, break line dart was applied in three different amounts, 0.5, 1.0, and 1.5cm respectively according to A, B and C breast sizes, and as the dart amount increased, extra ease on the break lines was reduced. The dart was applied on the edge lines of the lapel and it was applied from a point which was 6cm above the breast point to the end of the princess line for all the breast cup sizes.

• 대한본초학회지
• /
• 제39권1호
• /
• pp.39-47
• /
• 2024

Objectives : This study evaluates how various traditional Korean herbal medicines assess MUC5AC expression for esophageal mucosal defense and analyzes the associated mechanisms involved in inflammation. Methods : Forty types of traditional Korean herbal medicines were assessed for in vitro antioxidant activities, and the real-time PCR method was employed to analyze MUC5AC expression under pH 4.5 conditions in human esophageal epithelial cells (HET-1A). Eight types of Korean herbal medicines were evaluated for in vitro antioxidant activities, and Reactive oxygen specise (ROS) expression was analyzed under bile salt (480 𝜇M) and pH 5.5 conditions in human esophageal epithelial cells (HET-1A). Simulation experiments involving bile salts and acidity were conducted for one hour to assess the efficacy of four drugs, and the activities of Mitogen-activated Protein Kinase (MEK), Nuclear Factor Kappa B (NF-𝜅B), and Cyclooxygenase-2 (COX-2) were detected through Western blot analysis. Results : Compared to the Normal group, the Control group exhibited higher ROS generation. Such increased ROS levels were significantly reduced by four extracts: Citrus Unshius Pericarpium (CUP), Cnidium officinale Rhizoma (CR), Ginseng Radix (GR), and Linderae Radix (LR). The protein expression of COX-2 decreased with the treatment of LR, CUP, and CR. Particularly, CUP and CR exhibited superior effects compared to other groups in inhibiting the phosphorylation of NF-𝜅B. Conclusion : Based on the results obtained, we have identified drugs that inhibit oxidative stress and inflammation caused by bile acid in esophageal epithelial cells. Our future plans involve comparing and analyzing the efficacy of these herbal medicines through animal experiments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.149-154
• /
• 2007

The zinc prosphate film treatments used to lubricating treatment of mostly cold forging processes. But there are several problems happened to lubricating treatment process such as happening harmful environment on person, complex lubrication processing occurring in energy and time consumption, eco-destructive and chemical by-product generation, the needs of waste disposal etc. As a result, a water-soluble lubricant was developed to replace the perfect or some of the zinc prosphate film in the world. In order to solve these problems, this study evaluated the performance of the typical water-soluble. In this study, for these requirement inquiry of two part. First, about possibility of replace zinc phosphate lubricant, quantitatively evaluation developed of water-soluble lubricant for cold forging vs zinc phosphate lubricant. Second, About optimization of coating Process use to equipment with practicable automatic coating Process. The performance evaluation of these lubricants was conducted using the double cup extrusion test and spike forging test. With the use of the commercial FE code DEFORM, friction factor calibration curves, i.e. cup height ratio vs. punch stroke and spike height vs. punch stroke, were established for different friction factor values. By matching the cup height ratio and the punch stroke and spike height vs. punch stroke from experiment to that obtained from FE simulations, the friction factor of the lubricants was determined. Survey of comparative analysis use to SEM that sprayed lubricant surface structure of grain shape and characteristic of lubricant performance based on grain shape and deformed lubricant surface expansion. As a result, developed lubricant were found to perform comparable to or better than zinc phosphate. And thought this result, innovatively cope with generated problem of existing lubrication process.

• Journal of Medicine and Life Science
• /
• 제20권1호
• /
• pp.21-31
• /
• 2023

We aimed (a) to investigate the associations between age, body mass index (BMI), and breast size with mammographic density based on the breast imaging reporting and data system (BI-RADS) and volumetric breast density measurement (VBDM) with Volpara, (b) to evaluate the associations of age, BMI, and breast size with fibroglandular tissue volume (FGV), and (c) to demonstrate the association of mammographic density grade with FGV. From April 2012 to May 2012, 1,203 women consecutively underwent mammography, and their breast density was calculated using the density grade and volume determined by Volpara. In total, 427 women were included in this study. The BMI and breast size of the 427 women were determined. The associations between mammographic density and age, BMI, and bra cup size were assessed. In addition, the associations between FGV and age, BMI, bra cup size, and mammographic density were assessed. The mean age of the women was 51 years (range, 27-83). Age was associated with mammographic density based on BI-RADS (P<0.0001), and both age and BMI were associated with mammographic density based on Volpara (P<0.0001). The mean FGV significantly decreased as age increased (P<0.0001) and increased as BMI and bra cup size increased (P<0.0001 and P=0.0007, respectively). Age was associated with mammographic density, according to both the BI-RADS and VBDM; however, BMI was only associated with mammographic density based on the VBDM. Larger FGV was associated with younger age, higher BMI, larger bra cup size, and higher mammographic density

• 대한수학회보
• /
• 제30권2호
• /
• pp.213-221
• /
• 1993

In this paper, we will show that the multiplicative group G in a finite ring R with identity 1 has a (B, N)-pair satisfying the following conditions; (1) G=BNB where B and N are subgroups of G. (2) B.cap.N is a normal subgroup of N and W = N/(B.cap.N), is generated by a set S = { $s_{1}$, $s_{2}$, .., $s_{k}$} where $s_{i}$.mem.N/(B.cap.N), $s_{i}$$^{2}$.iden.1 and $s_{i}$.neq.1. (3) For any s.mem.S and w.mem.W, we have sBw.contnd.BwB.cup.BswB. (4) We have sBs not .subeq. B for any s.mem.S. When G, B, N and S satisfy the above conditions, we say that the quadruple (G, B, N, S) is a Tits system. The group W is called the Weyl gorup of the Tits system.ystem.m.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.407-410
• /
• 2005

The drawability of AZ31B magnesium sheet is estimated according to the variable temperatures (200, 250, 300, 350 and $400^{\circ}C$), forming speed (20, 50, 100 mm/min), thickness (0.8, 1.4 t), blank holding force (1.0, 1.4, 1.7kN). The deep drawing process (DDP) of circular cup is used in forming experiments. The results of deep drawing experiences show that the drawability is well at the range from 250 to $300^{\circ}C$, 50mm/min forming speed and 1.4kN blank holding force. The 0.8t magnesium sheets were deformed better than 1.4t. BHF was controlled in order to improve drawability and protect the change of cup thickness. When BHF was controlled, tearing and thickness change were decreased and LDR. was improved from 2.1 to 3.0.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.145-150
• /
• 1997

A computer-aided process design system for axisymmetric deep drawing products has been developed. An approach to the system is based on the knowledge based system. The hypothesized process outline of the deep drawing operations is generated in the geometrical design module of the system. In this paper, the module has been expanded. The rules of process design sechems for complex cup drawings are formulated from handbooks, experimental results and empirical knowhow of the field experts. The input to the system is final sheet-metal objects geometry and the output from the system is process sequence with intermediate objects geometries and process parameters, such as drawing load, blank holding force, clearance and cup-drawing coefficient.