• 대한기계학회논문집B
• /
• 제38권8호
• /
• pp.671-676
• /
• 2014

볼텍스 컵은 실린콘 웨이프 제조공정과 같이 민갑한 물체을 이송시키는 방법으로 제안되었다. 볼테스 컵의 상부에 위치한 노즐을 통해 공기를 공급하면 내부 실린더에서 큰 선회유동이 생성된다. 공기는 볼텍스 컵과 바닥면 사이의 틈새로 빠져나가면서 흡입압력을 생성시키고 물체를 들어 올릴 수 있게 된다. 본 논문에서는 볼텍스 컵에 관한 3차원 유동 해석을 통해 실험 결과와 해석 결과를 비교하여 해석의 신뢰성을 확인하였다. 그리고 볼텍스 컵의 길이 변화와 형상 변화를 주어 해석을 통해 흡입 압력 생성에 영향을 미치는 정도를 분석하였고, 볼텍스 컵 형상의 최적 조건을 제시하였다.

• 한국의류학회지
• /
• 제32권1호
• /
• pp.123-133
• /
• 2008

The purpose of this study is to analyze dissatisfaction and size appropriateness of the women with big breast for design the high functional big size brassiere. The data were collected from 179 women(between the ages of 20 and 39) residing in Gwang-ju using a questionnaire to purchase, wearing comfort, dissatisfaction of the size, wire and the pad of the big size brassiere. The data were analyzed with Chi-square test, t-test and ANOVA using statistical program SPSS 12.0. The results of this research are as follows; 1) Seven-two-point-two percent of the women with big breast more than C cup size polled said they had difficulty in looking for the suitable size of the brassiere and they usually weared the smaller size than the their own size. As a result, they felt inconvenience for the discord with the nipples and lack of the shape revision. 2) According to the result of the correlation analysis, breast size and Rohrer's index showed low correlation. 3) After dividing all respondents for this research into categories of the group of more than C cup and less than B cup the differences in responses were compared. The dissatisfaction with brassier were 'discord of cup size', 'pain due to the wire' and 'unnatural breast shape' in the group of more than C cup, compared to 'discord of cup size' and 'deformation of the wire and pad' in the group of less than B cup.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1193-1202
• /
• 1996

This study investigates and analyzes the amount and shape of the front waist dart of the bodice and investigates the dart division method by bust size. Measurements at 5 arm positions were taken from 15 subjects. Clothing tests were given to 6 of the subjects. The conclusions were as follows: 1) Front Body surface changes were occurred around armpit and they were caused by the wrinkles of the armpit 2) The curved dart line was more appropriate for use with C cup, the large bust body, than the linear line. The changes of the dart amount at arm movements had different types by bust size. 3) Patterns for A & C cup body were adequate to divide the dart amount by 3 darts such as under the B.P., under the anterior armpit and side line, or to aggregate to 1 dart under the B.P. For the B cup body, however, the suitable pattern to use was the total dart amount divided by 1~2 darts and decreasing the waist line at the side line should be avoided.

• Journal of applied mathematics & informatics
• /
• 제27권5_6호
• /
• pp.1157-1163
• /
• 2009

Let G be a graph with vertex set V(G) and let f be a nonnegative integer-valued function defined on V(G). A spanning subgraph F of G is called a fractional f-factor if $d^h_G$(x)=f(x) for all x $\in$ for all x $\in$ V (G), where $d^h_G$ (x) = ${\Sigma}_{e{\in}E_x}$ h(e) is the fractional degree of x $\in$ V(F) with $E_x$ = {e : e = xy $\in$ E|G|}. In this paper it is proved that if ${\delta}(G){\geq}{\frac{b^2(k-1)}{a}},\;n>\frac{(a+b)(k(a+b)-2)}{a}$ and $|N_G(x_1){\cup}N_G(x_2){\cup}{\cdots}{\cup}N_G(x_k)|{\geq}\frac{bn}{a+b}$ for any independent subset ${x_1,x_2,...,x_k}$ of V(G), then G has a fractional f-factor. Where k $\geq$ 2 be a positive integer not larger than the independence number of G, a and b are integers such that 1 $\leq$ a $\leq$ f(x) $\leq$ b for every x $\in$ V(G). Furthermore, we show that the result is best possible in some sense.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.118-121
• /
• 2005

The square cup drawing of magnesium alloy AZ31 $(aluminum\;3\%,\;Zinc\;1\%)$ sheets was studied by experimental approach in various temperatures (200, 250, 300, 350, $400^{\circ}C$) when blank holding force (BHF) was controlled in real-time. And so on, the drawability was measured with the different die and punch coating. The square cup drawing test was performed by three different coated punches (CrN, TiCN, Non-coated). BHF was set about 2.0 KN, forming speed was 50 mm/min, blank thickness were 0.5, 1.0mm and the cup size was 40 mm by 60 mm after forming. The experimental data of square cup drawing test show that the tools coating and temperature were effect on the drawbility.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.333-336
• /
• 2008

There are many different kinds of forming processes to make a tubular product such as hydroforming and tube drawing. However, we should consider a better forming process in view point of energy consumption and $CO_2$ emission to save our earth. In this paper we have conducted FEM simulations to the various forming processes for sheet and tubular products to compare their energy consumptions. One example is tubular product and the other for drawn cup. From the comparisons of total energy for hydrofroming and tube sinking processes, hydroforming is consumed more energy than tube drawing. Also the cup drawing from sheet metal and tube sinking for the cup with flange indicate that the tube sinking is better than cup drawing of sheet metal in energy consumption.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.109-110
• /
• 2010

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.325-331
• /
• 2010

3-컵 풍속계는 자동기상측정, 환경 모니터링, 풍력 발전에 필요한 풍속을 측정하기 위해 널리 사용되고 있다. 일반적으로 3-컵 풍속계의 회전부를 지지하는 베어링은 오염물질, 진동 또는 돌풍 등의 여러 요인에 의해 마모되기 쉽고, 이로 인해 풍속에 대한 출력 특성이 장기적으로 변한다. 따라서 3-컵 풍속계를 주기적으로 교정하여 풍속에 대한 출력 특성을 유지 및 관리해야 한다. 본 연구에서는 3-컵 풍속계가 설치된 현장에서 풍속계를 교정 할 목적으로 제트 유동을 이용한 현장용 교정 장치를 제작하였다. 현장용 교정 장치가 3-컵 풍속계를 교정할 수 있는지 확인하기 위해, 현장용 교정 장치의 제트 유동 특성을 측정하였다. 현장용 교정 장치를 가지고 5 종류의 3-컵 풍속계들을 교정하였고, 풍동에서 3-컵 풍속계를 교정한 결과와 비교하였다.

• 복식문화연구
• /
• 제20권4호
• /
• pp.549-559
• /
• 2012

The purpose of this study was to analyze the comfort of sports bras by style and bra cup size. The comfort of wear was measured with compression level. The displacement of breast points (BP) after wearing a sports bra was measured. Study subjects evaluated the comfort level of the compression type and encapsulation type sports bras after walking and running. The results showed that all types of experimental sports bras provided more coverage than everyday bras. The compression type bra placed more pressure on the breast, chest, and under-bust than the encapsulation type bra. The BP distance decreased for all types. The C cup subjects' breasts were raised after wearing the sports bras. The B cup subjects had less comfort with the compression style bra than C cup subjects. The racer back style bra with high neckline and small band girth placed more pressure than others. They were difficult to don and doff and the least comfortable. These results imply that the racer back compression style sports bra was uncomfortable for women with large breast, while the encapsulation style bra with the compressing panel at upper chest was the most comfortable. The bras that shortened BP distance placed more pressure on the breast. But the bra that raised and shorted the distance of BP provided better comfort for large-breasted subjects.

• 소성∙가공
• /
• 제20권1호
• /
• pp.36-41
• /
• 2011

Meso-scale or micro-scale forming of sheet metal parts has been recently considered as one of the important forming technologies with growing demand on meso/micro products for electric or medical devices. Experimental investigation on the cylindrical meso-cup drawing with hemispherical punch is carried out to examine the limit drawing ratio and thickness distribution of drawn cups. The working parameters chosen in this study are blank diameter, die-corner radius and blankholding force. It is found from the experiments that the limit drawing ratio of 2.4 can be achieved in the case of hemispherical cup drawing and uniform thickness distribution in wider region can be obtained compared with the results of conventional cup drawing.