• Title/Summary/Keyword: B/t ratio

Search Result 991, Processing Time 0.032 seconds

Effects of Combined Application of Micronutrients on these Total and Relative Contents, Uptake Amounts, and Mutual Ratios in Orchardgrass and White Clover (Orchardgrass 및 White clover의 단파 및 혼파 재배에서 미량요소(Fe, Mn, Cu, Zn, Mo, B)의 조합시비가 목초의 총 함량, 상대 함량, 탈취량 및 상호비율 변화에 미치는 영향)

  • Jung, Yeun-Kyu
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.24 no.2
    • /
    • pp.93-104
    • /
    • 2004
  • This pot experiment was conducted to investigate the effects of combined micronutrient application($T_1$; control, $T_2$; Fe, $T_3$; Fe+Mn, $T_4$; Fe+Mn+Cu, $T_5$ ; Fe+Mn+Cu+Zn, $T_6$ ; Fe+Mn+Cu+Zn+Mo, T$_{7}$; Fe+Mn+Cu+Zn + Mo + B) on forage performance of pure and mixed cultures of orchardgrass and white clover. The fifth part was concerned with the changes in the total and relative contents, uptake amounts, and mutual ratios. of micronutrients in forages. The results obtained are summarized as follows: 1. The relative contents(total contents of 6 micronutrients = 100%) of Fe and Mn were considerably influenced by the antagonism between Fe and Mn, and also were influenced by the differences in Mn-absorption between orchardgrass and white clover. Compared with pure culture, orchardgrass showed high relative contents of Mn, and low relative contents of Fe and B in mixed culture. White clover, however, tended to be exactly opposed to the above trends. In relative contents, the T$_6$ 6/ resulted generally in decrease of Fe. However the $T_7$ resulted in increase of Mn and B. In addition, the $T_7$ resulted in decrease of Cu and Zn in orchardgrass, and Mo in white clover. 2. In general, there were differences in the tendency between the yield changes and the uptake amounts of micronutrients. General differences have been showed in the uptake amounts and mutual ratios of micronutrients based on the forage species, pure/mixed culture, additional fertilization, and antagonism. The uptake amounts of total micronutrients were generally increased by the treatments with increased combination. In uptake amounts, the $T_7$ resulted in the increase of Mn and B, and decrease of Mo. 3. The mutual ratios of Fe/Mn, Fe/Cu, and Mn/Cu were considerably influenced by the antagonism between Fe and Mn. At the $T_7$ , very low ratio of Fe/Mo affected by the T6 tended to be somewhat improved because of the decrease of Mo content. The poor growth of forages at the $T_6$ was improved by the $T_7$ . This fact was likely to be caused by the adequate B/Mo ratio.

Performance Evaluation of a DVB-T2 Receiver with Iterative Demapping and Decoding in MISO Transmission Mode (MISO 전송 모드에서 Iterative Demapping and Decoding을 사용하는 DVB-T2 수신기의 성능분석)

  • Paik, Jong-Ho;Seo, Jeong-Wook;Kang, Ming-Goo;Jeon, Eun-Sung;Kim, Dong-Ku
    • Journal of Internet Computing and Services
    • /
    • v.12 no.3
    • /
    • pp.111-117
    • /
    • 2011
  • In this paper, the BER(Bit Error Rate) performance of a DVB-T2(Second Generation Digital Terrestrial Television Broadcasting System) in MISO(Multiple Input Single Output) transmission mode is evaluated by the computer simulation. In the DVB-T2 receiver, an IDD(Iterative Demapping and Decoder) technique is employed that exchanges extrinsic information between the demapper and the LDPC decoder. Simulation results show that the IDD-based DVB-T2 receiver in MISO transmission mode provides 2dB gain at BER of $10^{-4}$ but suffer from the frequency offsets between transmit antennas.

Experimental Study on the Effect of Houttuyniae Herbal Acupuncture on the Growth of Melanoma 816 in Mice (어성초(漁腥草) 약침(藥鍼)이 B16흑색종(黑色腫) 암(癌)모델에 대한 항종양효과(抗腫瘍效果) 및 면역반응(免疫反應)에 미치는 영향(影響))

  • Bae, Won-Young;Go, Hyung-Gyun;Kim, Chang-Hwan
    • Journal of Acupuncture Research
    • /
    • v.18 no.1
    • /
    • pp.186-201
    • /
    • 2001
  • Purpose ; In order to study the effect of Houttuyniae herbal acupuncture on growth of melanoma B 16 and immunity in mice, the Control group with normal saline acupunchure after subcutaneous inoculation of B16BL6 cells, the Sample I with Houttuyniae herbal acupuncture manufactured by distilled water extraction method after subcutaneous inoculation of B16BL6 cells and the Sample II with Houttuyniae herbal acupuncture manufactured by alcohol extraction method after subcutaneous inoculation of B16BL6 cells were divided. Methods ; To evauluate the effect of Houttuynias herbal acupuncture on growth of melanoma B16 in mice, the weight of mouse melanoma, body weight, spleen index( $\sqrt(Weight of spleen/Body weight){\times}100$), lymphocytes numbers in mouse peripheral blood and spleen tissue, the percentage of CD4+ T cells, CD8+ and the ratio of CD4+/CD8+ in mouse peripheral blood and spleen tissue are measured. Results ; In study of the weight of mouse melanoma, Houttuyniae herbal acupuncture groups(Sample I, Sample II) showed statistically significant inhibitory effect. And in study of effect of reduction of change in body weight of mouse, Sample I showed statistically significant inhibitory effect, too. In study of reduction of spleen index, lymphocytes numbers in mouse spleen tissue, and the percentage of CD4+ and the ratio of CD4+/CD8+ T cells in mouse peripheral blood, Houttuyniae herbal acupuncture groups(Sample I, Sample II ) showed with statistically significant inhibitory effect. Also, Sample I showed inhibitory effect of reduction of the percentage of CD8+ T cells in mouse peripheral blood and spleen tissue and Sample II showed inhibitory effect of reduction of the percentage of CD4+ and the ratio of CD4+/CD8+ T cells in mouse spleen tissue with statistical significance. Conclusions ; The inhibitory effect of reduction of lymphocytes numbers in mouse peripheral blood and IL-2 productivity, Houttuyniae herbal acupuncture groups(Sample I, Sample II) didn't show significant effect.

  • PDF

Chip Breaking Characteristics of S, PbS, and BiS Free Machining Steels (S, PbS 및 Bi S 쾌삭강의 칩절단 특성)

  • Lee, Young-Moon;Bae, Dae-Won;Jang, Jun-Ho
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.4 no.2
    • /
    • pp.3-9
    • /
    • 2005
  • In this study, the chip breaking characteristics of S, PbS and BiS free machining steels have been assessed. PbS free machining steel shows the lowest value of chip thickness ($t_c$) under the same cutting conditions. SM10C steel has the largest value of the chip cross-section area ratio ($R_{CA}$). As the feed rate becomes larger the chip breaking cycle time ($T_B$) decreases and the chip breaking index ($C_B$) increases. The properly controlled-C type chip has been obtained with the value of $C_B$ between 0.05 and 0.2. Free machining steel, PbS produces the properly controlled-C type chip in a wider feed rate range than other steels.

  • PDF

LYMPHOCYTES POPULATION IN RELATION TO CLINICAL SYMPTOMS IN IRREVERSIBLE PULPITIS (비가역성 치수염의 임상증상에 따른 임파구 분포에 관한 연구)

  • Lee, Woo-Cheol;Lim, Sung-Sam
    • Restorative Dentistry and Endodontics
    • /
    • v.20 no.1
    • /
    • pp.235-249
    • /
    • 1995
  • This study was designed to identify the lymphocytes present and to examine the relation between lymphocytes population and clinical symptoms of the pulps clinically diagnosed as normal and irreversible pulpitis. We recorded the history and severity of the pain and performed several clinical tests, before extirpation of vital, irreversibly inflamed pulps in routine endodontic treatment. Then the teeth were divided into two groups. Five teeth, categorized in acute symptom group, had severe spontaneous pain, particularly at night and were extremely sensitive to cold and heat. The other 15 teeth with history of mild to moderate pain and with or without cold or heat responses were categorized as chronic symptom group. Inflamed pulps were also classified into 8 minor groups by presence or absence of signs or symptoms related to the involved teeth, including the presence of pain on percussion, pain on heat and cold stimuli and the periodontal pocket depth. All extirpated pulps were immediately immersed in ultra low-temperature freezer($-74^{\circ}C$), and they were sectioned $6{\mu}m$ in thickness. Specimens were stained using three-stage indirect immunoperoxidase techniques(DAKO, LSAB kit) and monoclonal antibodies for detecting the presence of T lymphocytes(T), B lymphocytes(B) and helper(T4) and suppressor(T8) lymphocytes. Following results were obtained; 1. All the examined normal and inflamed pull) tissues had positive staining for T lymphocytes and T helper and T suppressor cells. But B cells were observed only in inflamed pulp. 2. Statistically more T and B cells were observed in acute symptom group as compared with chronic symptom group(p<0.05). 3. Cell ratio of BIT in acute symptom group were significantly higher than that of chronic symptom group(p<0.05). 4. Only B cells were significantly increased in the percussion positive group than the number of B cells in percussion negative group(p<0.05). 5. No differences were observed in the number of different cell types among other minor groups.

  • PDF

UA Study on the Polarization Selective Antenna for UHF RFID System (UHF RFID 시스템을 위한 Polarization selective 안테나 연구)

  • Lee, Sa-Won;Song, Woo-Yong
    • Journal of the Korea Society of Computer and Information
    • /
    • v.15 no.7
    • /
    • pp.67-74
    • /
    • 2010
  • TIn this paper, it is designed the polarization selective antenna for UHF RFID system. The proposed antenna is consist of microstrip patch antenna with dual feeding and two SPDT switches and a SP4T switch and 3dB hybrid coupler. Through control of voltage of switches, the proposed reader antenna can select horizontally linear polarization, vertically linear polarization, left-hand circular polarization (LHCP) and right hand circular polarization (RHCP). The proposed reader antenna satisfied 2:1 VSWR at 902MHz~928MHz. and it has under 3dB AR(axial ratio). Peak gain of antenna is 7.71dBi, 7.55dBi with linear polarization and 7.31dBic, 7.81dBic with circular polarization at x-y plane. Also Axial ratio of antenna is 2.01~2.83dB and 2.02~2.60dB respectively. It is satisfied 3dB axial ratio.

A Study of Fatigue Damage Model using Neural Networks in 2024-T3 Aluminium Alloy (신경회로망을 이용한 Al 2024-T3 합금의 피로손상모델에 관한 연구)

  • 홍순혁;조석수;주원식
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.10 no.4
    • /
    • pp.14-21
    • /
    • 2001
  • To estimate crack growth rate and cycle ratio uniquely, many investigators have developed various kinds of mechanical parameters and theories. But, thes have produced local solution space through single parameter. Neural Networks can perform patten classification using several input and output parameters. Fatigue damage model by neural networks was used to recognize the relation between da/dN/N/N(sub)f, and half-value breadth ratio B/Bo, fractal dimension D(sub)f, and fracture mechanical parameters in 2024-T3 aluminium alloy. Learned neural networks has ability to predict both crack growth rate da/dN and cycly ratio /N/N(sub)f within engineering estimated mean error(5%).

  • PDF

A photoelastic study of the stress distribution on canine retraction by segmented TMA T-loop spring (Segmented TMA T-loop spring에 의한 견치 후방이동시의 응력분포에 관한 광탄성법적 분석)

  • Yoon, Young-Jooh;Kim, Kwang-Won;Yu, Pil-Sik
    • The korean journal of orthodontics
    • /
    • v.31 no.2 s.85
    • /
    • pp.199-207
    • /
    • 2001
  • The segmented TMA T-loop spring, used for reciprocal space closure and described by Burstone, was used to achievebodily movement of canine. Photoelastic analysis is a technique for the transformation of internal stress into visible light patterns. The two-dimensional photoelastic stress analysis was performed, and stress distribution was recorded by photography. The purpose of this study was to visualize photoelastically the distribution of forces transmitted to the alveolus and surrounding structures using new segmented TMA T-loop spring for canine retraction. The results were as follows: 1. Decreased activation produced decreased stress of upper 1st. premolar extraction site and increased intrusive stress of upper 1st. molar, regardless of T-loop position. 2. At 5mm activation, More posterior positioning of T-loop Produced an increased stress in upper 1st. premolar extraction site. 3. At 3mm activation, More posterior positioning of T-loop produced an increased stress in upper 1st. premolar extraction site and mesial lower half of upper 1st. molar mesio-buccal root. 4. At 1mm activation, More anterior positioning of T-loop produced an increased stress in upper mesial and blew apex area of upper canine root. 5. 0.25 B/L ratio and 3mm activation produced bodily movement of canine. To summarize, desired tooth movement and anchorage requirement is possible by altering the activation and mesio-distal position of the T-loop spring.

  • PDF

Growth Responses at Different Growth Stage of Pinus densiflora Seedlings to Enhanced Uv-B Radiation (자외선-B 증가에 따른 소나무 유묘의 생장 단계별 생장 반응)

  • 김종진
    • Journal of Korea Foresty Energy
    • /
    • v.19 no.1
    • /
    • pp.1-6
    • /
    • 2000
  • This study was carried out to investigate the growth responses of Pinus densiflora seedlings to enhanced UV-B environment for 16 weeks in the field condition. The seedlings were treated with one of three levels of UV-B dosages - ambient UV-B, ambient + 3.2, and ambient + 5.2 KJ m$^{-2}$day$^{-1}$ and the irradiation was performed at the stage before the germination, the fully expanded cotyledon, and the primary needles grown more than 0.8cm in length of the seedlings, respectively. Enhanced UV-B irradiation reduced the height and the root collar diameter growth, and dry mass production of the seedling, and T/R ratio was increased by the UV-B treatment. Difference in seedling growth was observed by difference in time of the UV-B treatment. Among the seedlings which were treated with ambient - 3.2 KJ m$^{-2}$day$^{-1}$, height and root collar diameter growth was relatively high in the seedling received the UV-B treatment at the stage before the germination. The lowest dry mass production was observed in the seedlings received the UV-B at stage of cotyledon both in two levels of enhanced UV-B treatment. Chlorophyll concentration was reduced by enhanced UV-B irradiation, and chlorophyll a/b ratio was increased by the UV-B treatment.

  • PDF

The segregation mode of plant height in the crosses of rice varieties 1. Indica X Indica crosses (수도 품종간 교잡에 있어서의 초장의 유전 분리 1. Indica x Indica 조합)

  • Heu, Mun-Hue;Beachell, H.M.;Chang, T.T.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.5 no.1
    • /
    • pp.37-43
    • /
    • 1969
  • A genetrc study was made on plant height of indica rices with a few segregating F2 populations involving three semi-dwarf varieties such as T(N)I, CP231-SLO17, and B569A12. These populations were grown in breeding nursery at the International Rice Research Institute (IRRI) during several seasons. 20 to 25 day old seedlings grown at upland seedbed were transplanted to the paddy in a single plant hill spacing 30 cm ${\times}$ 25cm. Measurements of plant height were made from the juncture between culm and roots to the tip of the longest panicle of a plant pulled out from the paddy when they are matured. The results are summarized as follows: 1. Tall indica varieties originated from the south-east Asian countries could be classified into two groups depending upon their allelism whether they showed monogenic segregating ratio of 3:1 or not when they were crossed to T(N)1. 2. Most of U.S. varieties, especially semi-dwarf breedirg materials such as CP231 ${\times}$ SIO17 and B569A12, did not show monogenic segregating mode of 3:1 ratio when they were crossed to T(N)1 or to other varieties bearing the same genetic allele of T(N)1 such as Peta and Sigadis.

  • PDF