• 한국운동역학회지
• /
• 제13권3호
• /
• pp.199-215
• /
• 2003

The purpose of this study was to attempt new starting motion and supply present starting motion in the 500M short track speed skating according to the center of gravity position. The center of gravity position ratio was divided starting motion into five(type A : front 80%-back 20%, type B front 70%-back 30%, type C : front 50%-back 50%, type D : front 30%-back 70%, type E : front 20%-back 80%). The three dimension motion analysis with DLT(direct linear transformation) method was executed using two video cameras. The following conclusion was that It was appear that reaction and execution time in starting motion was the most short in type B. It was characteristic that step of skaters was shorten and center of gravity position ratio was not effect to change of the step in each event. It was appear that the displacement of type D and type E were longer than that type A and type B during the starting motion. It was appear that skill types of center of gravity position ratio to the front were lower than that to the back and contract a posture. Observing the above, it was conclusion that skill type B of center of gravity position ratio to the tent was more effect than that to the back. But it is important that these skill type was most used to the competition and estimate the result.

• 대한전자공학회논문지TC
• /
• 제43권1호
• /
• pp.133-142
• /
• 2006

본 논문에서는 고정 무선중계 시스템의 주파수 조정을 위한 효율적인 보호비 산출 방법을 제안하고 계산된 결과를 제시한다. 제안된 보호비는 변조방식의 C/N, 잡음 대 간섭의 비(N/I), 다중간섭허용, 다중경로 및 강우감쇠의 페이드 마진, 통합필터 변별도의 함수로 표현된다. 실제 고정 무선중계 주파수에 대해 페이드 마진, 변조방식, 거리 및 간섭을 고려한 보호비를 산출하였으며, 계산 결과에 의하면 BER 10-6 기준으로 6.2GHz, 64-QAM, 거리 60km에 대해 페이드 마진과 동일채널의 보호비는 각각 41.1 dB 와 74.9 dB가 됨을 알 수 있었다. 제안된 방법은 보호비 정정인자를 통해 다양한 변수에 대해 보호비를 체계적 그리고 용이하게 구할 수 있으며, 또한 동일한 개념을 밀리미터파 대역의 무선중계 시스템 주파수 조정을 위한 보호비 산출에도 적용할 수 있는 장점을 지닌다.

• 한국습지학회지
• /
• 제3권1호
• /
• pp.75-89
• /
• 2001

Constructed wetlands were typically cost less to build and operate, and require less energy than standard mechanical treatment technology but they have similar performance to centralized wastewater treatment plants. Therefore, they were constructed especially many in rural areas, where are small villages but not industries. Accordingly, plantless column tests were performed to investigate the possibility on using zeolite as a filter medium of constructed wetland for the wastewater treatment. $COD_{cr}$ removal efficiency was 94.63% at hydraulic load $314L/m^2{\cdot}d$ and filtering hight 100cm filled with a zeolite mixture. This zeolite mixture consisted of 1 : 1 by volume of a zeolite in the diameter range of 0.5 to 1mm to a zeolite in the diameter range of 1 to 3mm. According, hydraulic load $314L/m^2{\cdot}d$ was considered as optimal. Three zeolite mixture were used to determine the optimal mixing ratio by volume of a zeolite(A) in the diameter range of 0.5 to 1mm to a zeolite(B) in the diameter range of 1 to 3mm diameter. 1 : 3, 1 : 1 and only B in A to B by volume were tested at hydraulic load $314L/m^2{\cdot}d$ and filtering hight 100cm. $COD_{cr}$ removal efficiency was more than 89% at mixing ratios of 1 : 3 and 1 : 1 in A to B. Removal efficiency was lower at the column filled with only B. Removal efficiency was better at filter medium filled with mixing ratio 1 : 1 in A to B than with the other mixing ratios. Thus, it was found that the mixture of mixing ratio 1 : 1 in A to B was appropriate for filter medium of constructed wetland. Removal efficiency was higher in down-flow than in up-flow, and $COD_{cr}$ and BOD were removed best in 20cm filter height near feeding area.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권2호
• /
• pp.185-191
• /
• 1998

A total of 240 weaned pigs (BW 5.4 kg) were allotted in a completely randomized block design to find out the optimum lactose : sucrose ratio for the weaned pigs. Treatments were 100:0 (A), 75:25 (B), 50:50 (C), 25:75 (D) and 0:100 (E) in lactose : sucrose ratio. For the first week after weaning, average daily gain (ADG) and feed/gain (F/G) were improved (p < 0.05) for pigs fed A, B and C diets compared to pigs fed diets D and E, but the average daily feed intakes (ADFI) of the pigs were not different. From d 7 to 14, no significant differences was found in ADG and ADFI among the treatments, but pigs fed the diets A, B and C had improved F/G compared with the pigs fed diets D and E (p < 0.05). From d 15 to 21, no significant differences were found in ADG, ADFI and F/G among the treatments. The digestibility of nutrients was not influenced by the lactose : sucrose ratio except nitrogen. Nitrogen digestibility of A diet was significantly higher than D and E diets (p < 0.05) but no significant differences were found among diets A, B and C. Dry matter and phosphorus excretions were not influenced by the treatments. The pigs fed diets A, B and C excreted significantly less nitrogen than the pigs fed diets D and E. In conclusion, the results suggest that sucrose can effectively replace up to 50% lactose in starter diets.

• 멤브레인
• /
• 제10권3호
• /
• pp.155-162
• /
• 2000

공급수가 원판틀형 모듈에 잘 분포될 수 있는 역삼투형 하우징(HY)을 개발하여 설계 제작하였으며 상용화된 Rochem(RC)시스템과 투과성능을 비교하였다. 자체 개발한 HY시스템은 RC시스템에 비하여 투과유속이 약간 떨어지는 반면, NaCl 배제율은 전반적으로 높았다 원판틀형 모듈인 type A, B, C에 대한 투과유속 및 배제율을 NaCl, sucrose 및 butanol 수용액으로 측정하였다. NaCl 및 sucrose의 경우, type C, A, B의 순으로 투과성능이 우수하였으나 butanol의 경우는 type B, C, A 순이었다. Type A에 대한 type C의 butanol 투과유속은 농도가 감소할수록 그리고 28 bar 범위내에서 운전압력이 증가할수록 향상되었다.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1035-1041
• /
• 2012

본 연구는 기업규모, 장부가치/시장가치 비율, 순이익/주가 비율, 현금흐름/주가 비율, 레버리지 등 기본적 변수를 사용하여 주식수익률에 유의적인 변수를 확인하고자 하였다. 이를 위해 본 연구에서는 횡단면 자료와 시계열 자료를 결합한 패널자료(panel data)를 이용하여 패널자료분석방법으로 연구모형을 실증적으로 분석하였다. 일반적으로 패널자료를 사용하면 Hsiao[13]가 지적한 바와 같이 표본의 크기를 확대시켜 자유도를 증가시키고 이론적으로 설명변수간 다중공선성(muti-collinearity) 문제를 완화할 수 있다. 실증분석결과에 의하면 기업규모(SIZ), 장부가치/시장가치 비율(B/M), 순이익/주가 비율(E/P), 현금흐름/주가 비율(C/P) 등이 주식수익률의 횡단면적 차이를 설명할 수 있는 유의적인 변수라 할 수 있다.

• 한국주조공학회지
• /
• 제37권5호
• /
• pp.148-156
• /
• 2017

The effects of minor additives on the casting properties of AC4A aluminum alloys were investigated. Measurements of the cooling curve and microstructure observations were conducted to analyze the effects of Ti-B and Sr minor elements during the solidification process. A fine grain size and an increase in the crystallization temperature for the ${\alpha}-Al$ solution were evident after the addition of 0.1wt% Al-5%Ti-1%B additive. The modification effect of the eutectic $Mg_2Si$ phase with the addition of 0.05% Al-10%Sr additive was prominent. A fine eutectic $Mg_2Si$ phase and a decrease in the growth temperature of the eutectic $Mg_2Si$ phase were evident. Fluidity, shrinkage and solidification-cracking tests were conducted to evaluate the castability of the alloy. The combined addition of Al-5%Ti-1%B and Al-10%Sr additives showed the maximum filling length owing to the effect of the fine ${\alpha}-Al$ grains. The macro-shrinkage ratio increased, while the micro-shrinkage ratio decreased with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives. The macro-shrinkage ratio was nearly identical, while the micro-shrinkage ratio increased with the addition of the Al-10%Sr additive. The tendency of the occurrence of solidification cracking decreased owing to the effect of the fine ${\alpha}-Al$ grains and the modification of the $Mg_2Si$ phase with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives.

• 한국정보통신학회논문지
• /
• 제23권7호
• /
• pp.779-785
• /
• 2019

인체공학적으로 개발된 Bismuth 차폐체를 뇌동맥류 코일 색전술에 적용함으로써 의료방사선 피폭으로부터 두피 및 수정체의 방사선 피폭을 감소시키고자 하였다. 광자극 형광 선량계를 이용하여 후두부, 양쪽 측두부, 양쪽 수정체부, 코 끝부를 개발된 Bismuth 차폐체를 사용 전 (A그룹) 후 (B그룹)로 측정하여 입사 표면 선량을 분석하였다. Bismuth 차폐체를 사용할 경우 화질에 대한 평가를 Signal to noise ratio (SNR)과 Contrast to noise ratio (CNR) 분석을 했다. A 그룹과 B 그룹의 입사 표면 평균 선량을 비교한 결과 A 그룹에 비해 B 그룹에서 평균 26.92% 감소되었다. CNR과 SNR의 분석은 로드맵과 디지털 감산조영 모두 동일하게 측정되었다. Bismuth 차폐체의 사용은 뇌혈관 중재적 시술 후 나타날 수 있는 일시적 탈모 및 기타 확률적 영향에 따른 방사선 장애를 화질의 저하 없이 감소시킬 수 있는 대안이 될 것으로 사료된다.

• 환경영향평가
• /
• 제7권2호
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.357-364
• /
• 2017

본 논문에서는 생물학적 판넬의 모재로써 마그네시아-인산칼륨 복합체의 품질을 제어하기 위하여 마그네시아-인산칼륨 복합체의 혼합비와 물-결합재비(W/B)에 대한 유동 및 압축강도의 영향을 고찰하고자 하였다. MPPC는 W/B 7수준(30, 35, 40, 45, 50, 55 and 60 vol. %) 및 인산칼륨 및 마그네시아 비율(P:M) 4수준(1;0.5, 1;1.0, 1;2.0 and 1;3.0)으로 제조하였으며, 실험결과, MPPC의 유동 및 압축강도는 P:M비 및W/B에 크게 의존하는 것을 확인할 수 있었다. MPPC의 플로우는 P:M이 증가할수록 반응을 위한 배합수의 부족으로 혼합이 되지 않는 것으로 나타났으며, 이러한 원인은 P의 밀도와 M의 밀도가 크기 때문인 것으로 나타났다. 또한 MPPC의 압축강도는 P:M이 증가함에 따라 강도가 감소하는 경향이 나타났으나 W/B에 따라서는 비례적인 변화가 나타나지 않아 모순된 결과가 나타났다. 이러한 결과는 MPPC의 경우 W/B에 따라 최적의 배합비율이 존재함을 확인할 수 있었다. 본 논문의 이러한 결과를 통하여 생물학적 판넬 설계시 재료적 측면에서 모재 재료의 유동성 및 압축강도에 대한품질 제어를 위한 기반자료로써 활용하고자 한다.