• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.329-346
• /
• 2000

The marine cargo insurance is mainly the insurance on foreign trade commodities. The sales contract stipulates as to which of the seller or the buyer should arrange the insurance. In other words, if the sales contract is made on the C.I.F. terms, the seller has to arrange the insurance, while, in the case of F.O.B. or C.F.R. terms, the buyer has to arrange it. The F.O.B. or C.F.R. terms means that the seller has to take out an insurance for himself until the cargo being loaded onboard the overseas vessel at the port of shipment in export country. But our country has not reasonable insurance to cover seller's risk, because it hasn't yet implemented the insurance. In respect of a cargo exported from Korea on F.O.B. or C.F.R. terms, the F.O.B. insurance covers comprehensively the inland transit and storage until the cargo being loaded onboard the overseas vessel at the port of shipment in Korea with a certain limitation of a insurance period. The goal of this study is to analyze the development propriety of F.O.B. Insurance. This could be done through analyzing the volume and analyzing the proportion of F.O.B. or C.F.R. terms for export. It is supposed that the potential demands of F.O.B. insurance are sufficient in our country for developing the F.O.B. insurance. At this point of time, the positive development of F.O.B. insurance for export is inevitable from the viewpoint of present situation of trading circles.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.85-90
• /
• 1995

본 연구에서는 투명 전극으로의 응용을 목적으로 PECVD법에 의해 증착된 B이 첨가된 ZnO 박막의 전기 및 광학적 특성을 살펴보았다. B을 첨가하지 않은 ZnO 박막은 비저항이 수 $\Omega$-cm 정도의 값을 가지고 있었으며 시간에 따른 비저항의 변화가 컸으나, 2% B2H6을 5-16sccm의 유량범위에서 첨가한 경우에는 5-9X10-2 $\Omega$-cm의 비저항을 가지고 시간 경과에 따른 비저항의 변화가 아주 작은 ZnO 박막을 얻을 수 있었다. Van der Pauw법에 의한 Hall 계수의 측정 결과에 의하면, B을 첨가하지 않은 ZnO 박막의 전자 농도는 1017/㎤정도였으나 B을 첨가함으로써 최고 1020/㎤까지 증가하였다. 그러나 B이 첨가되기 전에는 박막의 전하 나르게 이동도가 $4extrm{cm}^2$/V.sec 이었으나, B참가에 의해 $0.7\textrm{cm}^2$/V.sec 이하로 감소하였다. B을 첨가한 경우와 첨가하지 않은 경우의 ZnO 박막은 모두 가시광성영역에서 90%이상의 광투과율을 가지고 있었으며, B을 첨가한 경우는 전자농도가 증가함에 따라 광학적 밴드 갭이 3.3eV로부터 3.55eV로 증가하는 거동을 보였다.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.56-61
• /
• 2012

Magnesium alloy sheet which is commercially available in the market presently is AZ31B, a Mg-Al-Zn three elements alloy. AZ31B is used by being classified into AZ31B-H24 and AZ31B-O depending on temper designation. In this study, AZ31B-H24 and AZ31B-O alloy sheets with 1.25mm thickness were butt-welded using CW Nd:YAG laser. And the effect of materials on mechanical properties was investigated by tensile and hardness tests. As a result of this study, regardless of materials, the butt-welded joint did not show a significant difference in tensile strength and hardness values. However, compared with the basemetal, the AZ31B-O showed more outstanding mechanical properties than AZ31B-H24, and that is because H24 material lost the effect of work hardening during welding.

• Journal of the Korean Chemical Society
• /
• v.49 no.4
• /
• pp.377-380
• /
• 2005

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.49-53
• /
• 2000

Sodium borate silicate glass of composition $10Na_2O-39B_2O_3-50SiO_2-CoO$ and $20Na_2O-14B_2O_3-65SiO_2-CoO$ were prepared by melting oxide mixtures in alumina crucible at $1210^{\circ}C$ in an electric furance in air for 2h, and then quenching in air. The dielectric behavior of the quenched glasses are the subject of the present work. Properties such as dielectric constant and resistivity as a function frequency and temperature are reported. From the dielectric spectra, the glass phase transition temperature has been found to decrease at a rate $Na_2O$ 20 mol% and the dielectric constants increase with increasing $Na_2O$ content. The frequency dependent resistivity response of glass exhibits a non-Debye type relaxation.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.55-59
• /
• 1999

One of lead free glass, Bi based solder glass is investigated for electronic packaging application. The melting temperature of glass about $550^{\circ}C$ at Bi based glass (70wt% $B_2O_3$ + l5wt%$B_2O_3$ + 8wt% $SiO_2$ + 2wt% $P_2O_5$ + 4wt% $A1_2O_3$ +lwt% ZnO) and varied with $P_2O_5$ content in this system. Crystallized glasses were obtainded after 1hr heat teratment at $450^{\circ}C$ with 10wt% of $P_2O_5$ addition. Much higher melting temperature was observed at $B_2O_3$ rich composition area.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.94-96
• /
• 2002

The $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%) were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature by XRD and SEM. According to the X-ray diffraction patterns of the $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), the ilmenite $MgTiO_3$ and perovskite $SrTiO_3$ structures were coexisted and secondary phase $MgTi_2O_5$ were appeared. Increasing the sintering temperature. the grain size was increased. In the case of $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), dielectric constant, quality factor and temperature coefficient of resonant frequency were $13.52{\sim}18.13,\;32750{\sim}51736GHz$, $-15.78{\sim}25.64ppm/^{\circ}C$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.323-323
• /
• 2007

Influence of $La_2O_3$ addition to $CaO-B_2O_3$-based glass on the water leaching resistance of the glass was first investigated. The optimized $La_2O_3-CaO-B_2O_3$(LCB) glass was ball milled for varying time, followed by mixing with $Al_2O_3$ crystalline phase to form $Al_2O_3$-LCB glass composites at $875^{\circ}C$ for 1h. Microwave dielectric properties of the composites were investigated as a function of the ball milling time of the LCB glass. Dielectric constant and quality factor of the composites were 6.31 and 13856 GHz, respectively, when the LCB glass was ball milled for 2h prior to mixing with $Al_2O_3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.324-324
• /
• 2007

Influence of $La_2O_3$ addition to $ZnO-B_2O_3$-based glass on the water leaching resistance of the glass was first investigated. The optimized $La_2O_3-ZnO-B_2O_3$ (LZB) glass was ball milled for varying time, followed by mixing with $Al_2O_3$ crystalline phase to form $Al_2O_3$-LZB glass composites at $875^{\circ}C$ for lh. Microwave dielectric properties of the composites were investigated as a function of the ball milling time of the LZB glass. Dielectric constant and quality factor of the composites were 6.01 and 11676 GHz, respectively, when the LZB glass was ball milled for 2h prior to mixing with $Al_2O_3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.326-326
• /
• 2007

Influence of $Nd_2O_3$ addition to $ZnO-B_2O_3$-based glass on the water leaching resistance of the glass was first investigated. The optimized $Nd_2O_3-ZnO-B_2O_3$ (NZB) glass was ball milled for varying time, mixing with followed by $Al_2O_3$ crystalline phase to form $Al_2O_3$-NZB glass composites at $875^{\circ}C$ for 1h. Microwave dielectric properties of the composites were investigated as a function of the ball milling time of the NZB glass. Dielectric constant and quality factor were 5.70 and 9497 GHz, respectively, when the NZB glass was ball milled for 6h prior to mixing with $Al_2O_3$.