• 한국패류학회지
• /
• 제26권1호
• /
• pp.33-43
• /
• 2010

The ultrastructure of germ cells during spermatogenesis and some characteristics of sperm morphology in male Mytilus coruscus, which was collected on the coastal waters of Gyeokpo in western Korea, were investigated by transmission electron microscope observations. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves in that it contains a short midpiece with five mitochondria surrounding the centrioles. The morphologies of the sperm nucleus type and the acrosome shape of this species have an oval and modified cone shape, respectively. In particular, the axial rod is observed between the nucleus and acrosome of the sperm. The spermatozoon is approximately $45-50{\mu}m$ in length including a sperm nucleus (about $1.46{\mu}m$ in length), an acrosome (about $3.94{\mu}m$ in length) and tail flagellum (approximately $40-45{\mu}m$). The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure. Some special charateristics of sperm morphology of this species in the genus Mytilus are (1) acrosomal morphology, (2) the number of mitochondria in the midpiece of the sperm, and (3) the existence of a satellite. The axial rod appears in the acrosome and sperm nucleus as one of the characteristics seen in several species of the subclass Pteriomorphia, unlikely the subclass Heterodonta containing axial filament instead of the axial rod. The number of mitochondria in the midpiece of the sperm of this species in the family Mytilidae are five, as one of common characteristics appeared in most species in the family Mytilidae. Most of Mytilus species contain a satellite body which is attached to the proximal centriole in the middle piece of the sperm, as one of common characteristics of sperm morphology in the family Mytilidae.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.71-73
• /
• 2003

A CFD analysis has been made for fully developed turbulent flows in a triangular bare rod bundle with pitch to diameter ratio (P/D) of 1.123. The nonlinear turbulence models predicted the turbulence­driven secondary flow in the triangular subchannel. The nonlinear quadratic $\kappa-\omega$ models by Speziale and Myong-Kasagi predicted turbulence structure in the rod bundle fairly well. The nonlinear quadratic and cubic $\kappa-\omega$ models by Shih et al. and Craft et al. showed somewhat weaker anisotropic turbulence. The differential Reynolds stress model appeared to overpredict the turbulence anisotropy in the rod bundle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.177-183
• /
• 1997

The fuel rod for PWR is supported by the spring of the sapcer grid to maintain its axial location and lateral space between fuel rods to get proper functions during the residence in the reactor. The long exposure duration makes the spring to be relax and loss the spring force that results in a fuel rod rattling which may cause fuel rod failure. Here considering the spring behaviour as a function of burnup the reaction forces of the springs are calculated by the finite element program developed herein to evaluate the integrity of the fuel rod from fretting. The results are compared with previous data and ANSYS for the validation of the program and procedures.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.215-222
• /
• 2010

Long and slender body, like a fuel rod, oscillating in axial flow can be unstabilized even by the small cross flow which can be activated by the flow mixer or turbulent generator. It is important to include these effects of flow disturbance in dynamic stability analysis of nuclear fuel rod. This work shows how eigen frequency of a multi-span fuel rod can be changed by the swirl flow, which is discretely generated by a flow mixer. By solving a state-space form of the eigenvalue equation for a multi-span fuel rod system, the critical velocity at which a fuel rod becomes unstable was calculated. Based on the simulation results, we evaluated how stability of a multi-spanned nuclear fuel rod with mixing vanes can be affected by the coolant flow in an operating reactor core.

• 대한화장품학회지
• /
• 제10권1호
• /
• pp.13-23
• /
• 1984

The fluorescence intensity rations (F2.F1) of excimer (F2) to monomer (F1) of pyrene were measured as a function of the concentration of sodium dodecyl sulfate (SDS). It was found that there were not gross changes in size and shape of sphere-shape micelles in the first micelle concentration, while at concentrations above the second critical micelle concentration (CMC) the micelles grew in size with increasing concentration. Fluorescence intensities of 8-anilinonaphthalene 1-sulfonate (ANS) were also monitored as a micellar probe with varying concentrations of SDS. Results suggested that a phase transition from sphere-shaped micelles to hemicapped rod-like micelles occurred at the second CMC (17). A general formula for the axial ratio of ellip-soil-shaped micelle in the first micelle concentration was suggested. According to this general formula, the axial ratio of SDS, sodium lauryl ether sulfate and sodium laurate were 1:1, 5:2, and 5:3, respectively. The electrolyte-induced phase transition from spherical to hemicapped rod-like micelles occurred and the size of hemicapped rod-like micelles grew with increasing electrolyte concentrations. The maximum concentrations of solubilzed benzene in sphere-shaped micelles and hemicapped rod-like micelles were measured by differential spectrohpotometry. The hemicapped rod-like micelles in the presence of electrolytes grew in size with increasing amount of benzene solubilized.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.141-147
• /
• 2017

Mechanical shim is an advanced technology for reactor power and axial offset control with control rod assemblies. To address the adverse accuracy impact on the ex-core power range neutron flux measurements-based axial offset control resulting from the variable positions of control rod assemblies, the lead-lag-compensated in-core self-powered vanadium detector signals are utilized. The prompt ${\gamma}$ current of self-powered detector is ignored normally due to its weakness compared with the delayed ${\beta}$ current, although it promptly reflects the flux change of the core. Based on the features of the prompt ${\gamma}$ current, a method for configuration of the lead-lag dynamic compensator is proposed. The simulations indicate that the method can improve dynamic response significantly with negligible adverse effects on the steady response. The robustness of the design implies that the method is of great value for engineering applications.

• Advances in nano research
• /
• 제15권5호
• /
• pp.411-422
• /
• 2023

In the present study, the axial vibration of the nanorods is investigated in the framework of the doublet mechanics theory. The equations of motion and boundary conditions of nanorods are derived by applying the Hamilton principle. A finite element method is developed to obtain the vibration frequencies of nanorods for different boundary conditions. A two-noded higher order rod finite element is used to solve the vibration problem. The natural frequencies of nanorods obtained with the present finite element analysis are validated by comparing the results of classical doublet mechanics and nonlocal strain gradient theories. The effects of rod length, mode number and boundary conditions on the axial vibration frequencies of nanorods are examined in detail. Mode shapes of the nanorods are presented for the different boundary conditions. It is shown that the doublet mechanics model can be used for the dynamic analysis of nanotubes, and the presented finite element formulation can be used for mechanical problems of rods with unavailable analytical solutions. These new results can also be used as references for the future studies.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.37-46
• /
• 2004

Coil spring of automobile suspension system is very important to safety and dynamics of passenger car and requires a highly advanced quality control during manufacturing processes. Surface cracks on the coil spring rod produced by mechanical machining and heat treatment may cause a severe accident and large cost to the manufacturer. In order to detect surface cracks of the rod, guided wave technique is applied for a fast total volumetric inspection. Pochhammer equation is studied to investigate the dispersion characteristics of the guided wave in the spring rod and optimal wave modes sensitive to the surface crack are selected experimentally to design the experimental arrangement for the generation of guided wave. Rod samples with different size of artificial axial EDM notch on the surface ranging from 50${\mu}{\textrm}{m}$ to 1 mm are examined by guided wave and inspection results discussed.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.116-116
• /
• 2002

• 소음진동
• /
• 제5권1호
• /
• pp.117-122
• /
• 1995

The transfer matrix method is proposed to compensate the attachment effect of a piezo-electric impedance head. To validate the proposed method, an experiment is carried out for axial vibration of a uniform rod for which an analytical solution is known. The impedance head is attached to the test rod by a stud and is connected to the exciter. The frequency response function is mesured by applying random excitation from the electro-magnetic exciter. The frequency response function compensated by the method proposed in this research shows good agreement with the analytical solution.