• 제목/요약/키워드: Average travel distance

검색결과 66건 처리시간 0.023초

가스렌지와 창문위치에 따른 주방 배기성능 예측 (Prediction of the ventilation performance in a kitchen with various locations of gas range and window)

  • 김경환;이재헌;박명식;이대우
    • 설비공학논문집
    • /
    • 제12권1호
    • /
    • pp.75-82
    • /
    • 2000
  • This paper presents the predicted results by CFD technique of air flow and contaminant distribution in a full-scale kitchen opened to a living room, ventilated by a exhaust hood. To analyze the characteristics of the indoor environment, the concept of contaminant index was defined. In this study, the locations of the gas range and the window were chosen as the parameters to investigate the indoor environment. The values of the contaminant index for several layout of the gas range and the window were calculated and compared. When the gas range is installed along the wall with specified window location, its position in relation to the wall has unnoticed effect on contaminant infer. Once the location of the gas range is fixed, the indoor air quality may deteriorate by the proximity of the window to the gas range. This is due to the shorter distance that external fresh air must travel within the kitchen before it reaches the exhaust fan.

  • PDF

기종점통행량(O/D) 기반의 고속도로 통행실적 산정 방법론 연구 (Methodology for Estimating Highway Traffic Performance Based on Origin/Destination Traffic Volume)

  • 이호원;홍정열;최윤혁
    • 한국ITS학회 논문지
    • /
    • 제23권2호
    • /
    • pp.119-131
    • /
    • 2024
  • 고속도로의 효율적 운영과 지속가능한 이동환경 제공을 위해 정확한 통행실적의 파악은 필수적이다. 그러나 인프라 및 기술적 제약, 추정을 통한 기존 연구방법의 한계, 통합 빅데이터 활용의 제약 등의 이유로 즉각적이고 정확한 고속도로 통행실적 산정에 어려움이 있다. 이에 본 연구는 자동요금징수시스템, 단거리전용통신 등으로부터 수집된 실시간 빅데이터를 활용하여 개별 차량의 고속도로 기종점통행량(Origin-Destination: OD) 및 주행거리를 분석하고 이를 기반으로 고속도로 통행실적을 산정하는 방법론의 틀을 제시하였다. 특히 데이터상 하나의 통행임에도 불구하고 분할된 통행으로 나타나는 데이터상 오류를 통행궤적 및 주행특성 진단을 통해 올바르게 연결함으로써 보다 신뢰성 있는 고속도로 통행 OD를 구축하고자 하였다. 연구 결과 개별 차량의 분할된 OD 통행이 20분 내 연속되는 경우 통행연결이 필요하며 통행연결, 주행거리 산정, 누락교통량 비율 보정, 비연계 구간 연계 과정을 거쳐 전국 고속도로의 일평균 통행실적은 248,624천대·km/일로 도출되었다. 이는 도로업무편람에서 제시하는 248,166천대·km/일과 비교 시 약 458천대·km/일이 높았다. 본 연구의 결과는 기존의 조사과정에서 누락된 통행실적의 보완가능성을 보여준다.

Inter-Facility Transport on Extracorporeal Life Support: Clinical Outcomes and Comparative Analysis with In-house Patients

  • Hong, Tae Hee;Lee, Heemoon;Jung, Jae Jun;Cho, Yang Hyun;Sung, Kiick;Yang, Ji-Hyuk;Lee, Young-Tak;Cho, Su Hyun
    • Journal of Chest Surgery
    • /
    • 제50권5호
    • /
    • pp.363-370
    • /
    • 2017
  • Background: Extracorporeal life support (ECLS) is widely used in refractory heart or lung failure, and the demand for inter-facility transportation on ECLS is expanding. However, little is known about post-transportation outcomes, the clinical safety of such transportation, or the characteristics of the transported patients. Methods: This was a retrospective review of a 3-year, single-institution experience with inter-facility ECLS transport, as well as a comparative analysis of clinical outcomes with those of in-house patients. We also analyzed the risk factors for hospital mortality in the entire ECLS population using univariate and multivariate analyses to investigate the effects of transport. Results: All 44 patients were safely transported without adverse events. The average travel distance was 178.7 km, with an average travel time of 74.0 minutes. Early survival of the transported group seemed to be better than that of the in-house group, but the difference was not statistically significant (70.5% vs. 56.6%, p=0.096). The incidence of complications was similar between the 2 groups, except for critical limb ischemia, which was significantly more common in the transported group than in the in-house group (25.0% vs. 8.1%, p=0.017). After adjusting for confounders, being part of the transported group was not a predictor of early death (adjusted odds ratio, 0.689; p=0.397). Conclusion: Transportation of patients on ECLS is relatively safe, and the clinical outcomes of transported patients are comparable to those of in-house ECLS patients. Although matched studies are required, our study demonstrates that transporting patients on ECLS did not increase their risk of hospital mortality after adjustment for other factors.

일개 병원에 내원하는 관절염 환자의 가정간호 요구 (Needs of Home Care Services for the Arthritic Patients of One Hospital)

  • 이은옥;유경희
    • 근관절건강학회지
    • /
    • 제1권1호
    • /
    • pp.88-96
    • /
    • 1994
  • Treatment for the arthritic is mostly on the out-patient basis. The present rheumatologists practicing in Korea do not cover the total number of the patients. Also patients with arthritis need medical treatment for long period of time. Therefore, the number of patients waiting for the treatment is huge in number. This vicious cycle need to be broken in some way. Purpose of this study is to identify the need for home care of the arthritic patients. Nineteen hundred and sixty two subjects were interviewed in one hospital for one month. The following findings were observed : 1. The rates for demanding home care were from 60% to 100% depending on the areas. 2. Reasons for no need of home care were mainly credibility and short distance from the hospital. 3. Time spent for one way transportation was more than 3.3 hours except from Seoul and Kyungki area. The longer they spend time for transportation, the more they want home care services. 4. The number of patients who asked other persons to travel for prescription was 446(22.73%) and average number was 3.26 per year in those 446 cases. 5. Average expenses for transportation and other cost for each time of hospital visit were 21,073won ranged from 8,373 won to 132,571 won. The more spend money for visiting the hospital, the more they want home care services. In order to reduce the physical and economical burden of the arthritic patients living in remote areas, hospital-based home care services are justified on the bases of patients' demand and legislative support.

  • PDF

버스전용차로를 분리시설로 활용한 Express Lane 구축에 관한 연구: 경부고속도로 판교-한남 구간을 중심으로 (A Study on Construction of Express Lane Applied by Bus Only Lane as Seperation Facility: Focused on Pangyo-Hannam Section of Gyeongbu Expressway)

  • 김민경;김주현;신언교
    • 대한교통학회지
    • /
    • 제31권4호
    • /
    • pp.32-46
    • /
    • 2013
  • 고속도로의 도시부 구간에서는 IC간 구간의 길이가 짧아 단거리 통행 차량의 많은 이용으로 지 정체 현상의 원인이 되고 있다. 그리고 중앙버스전용차로가 시행되고 있는 고속도로는 버스가 버스전용차로에 진출입을 하면서 일반차로 차량 흐름에 방해를 주며 차량 간의 상충으로 위험한 상황을 초래하기도 한다. 이에 본 연구의 목적은 고속도로의 도시부 구간에서 효율적으로 운영하기 위한 새로운 차로운영 방안으로 버스전용차로를 활용한 Express Lane을 제안하고, 경부고속도로의 판교-한남구간을 대상으로 구축한 Express Lane에 대한 효과를 분석하는 것이다. 본 연구에서는 VISSIM 5.4를 활용하여 시나리오 설정에 따른 효과 분석을 실시하였다. 효과를 평가하기 위한 지표로 평균지체시간, 통행속도, 총 통행시간 등을 사용하였다. 분석 결과, 대상구간에서는 Express Lane의 수를 1개 설치할 경우에 가장 좋은 효과를 나타나고, 전체교통량 중 장거리 교통량이 25%를 차지할 때 가장 이상적인 교통상황이 구현되는 것으로 판단된다. 따라서 버스전용차로를 활용한 Express Lane 구축은 도로의 소통을 원활하게 할 뿐만 아니라 안전적, 비용적 측면에서도 긍정적인 효과를 나타내므로 의미있는 연구라고 판단된다.

비보호좌회전 확대에 따른 주기감소가 도심연동체계에 미치는 영향 연구 (A Study of Traffic Signal Progression on a CBD for Reducing Traffic Signal Cycle as Expansion of Permissive Left-Turn)

  • 정진형;권용석;최기준
    • 한국정보전자통신기술학회논문지
    • /
    • 제9권6호
    • /
    • pp.559-565
    • /
    • 2016
  • 본 교차로에 각 방향별 이동류의 상충해소를 위한 목적으로 도입된 교통신호제어는 차량증가에 따라 여러 교차로를 연계하여 정지와 지체시간을 최소화하는 간선도로 제어 목적으로 바뀌었고 이를 위해 교통신호운영 효율화를 위한 다양한 방법이 제시되고 있다. 본 연구는 도심 가로축 연동체계를 교통운영체계 선진화 방안에서 제시하고 있는 비보호좌회전확대로 운영되는 선직진 후좌회전 체계와 기존 실시간 대응제어 신호운영체계를 비교 분석하였으며, 비교 분석을 위해 4개시 5개 지역을 선정 평균 교차로 간격, 연동 가로축 거리 등을 구분하였다. 그 결과 교통운영체계 선진화 방안 신호운영체계의 교통처리용량은 실시간 대응제어 신호운영체계의 교통처리용량 보다 주기 160초 때 차로 당 286대, 140초 경우 308대, 120초 경우 264대가 증가하여 1차로 도로확장을 한 만큼의 효과가 있는 것으로 나타났다. 또한 가로축 연동에 대해서도 가로축 길이 2.0~3.0km, 2.0km미만에서 분석 주기(160초, 140초, 120초) 모두에서 연동밴드 폭이나 정지횟수에서 효과가 있는 것으로 나타났다.

An Fuzzy-based Risk Reasoning Driving Strategy on VANET

  • 이병관;정이나;정은희
    • 인터넷정보학회논문지
    • /
    • 제16권6호
    • /
    • pp.57-67
    • /
    • 2015
  • This paper proposes an Fuzzy-based Risk Reasoning Driving Strategy on VANET. Its first reasoning phase consists of a WC_risk reasoning that reasons the risk by using limited road factors such as current weather, density, accident, and construction, a DR_risk reasoning that reasons the risk by combining the driving resistance with the weight value suitable for the environment of highways and national roads, a DS_risk reasoning that judges the collision risk by using the travel direction, speed. and distance of vehicles and pedestrians, and a Total_risk reasoning that computes a final risk by using the three above-mentioned reasoning. Its second speed reduction proposal phase decides the reduction ratio according to the result of Total_risk and the reduction ratio by comparing the regulation speed of road to current vehicle's speed. Its third risk notification phase works in case current driving speed exceeds regulation speed or in case the Total_risk is higher than AV(Average Value). The Risk Notification Phase informs rear vehicles or pedestrians around of a risk according to drivers's response. If drivers use a brake according to the proposed speed reduction, the precedent vehicles transfers Risk Notification Messages to rear vehicles. If they don't use a brake, a current driving vehicle transfers a Risk Message to pedestrians. Therefore, this paper not only prevents collision accident beforehand by reasoning the risk happening to pedestrians and vehicles but also decreases the loss of various resources by reducing traffic jam.

토양수분과 경도가 동력경운기의 견인성능에 미치는 영향 (Effects of the Soil Moisture and Hardness on the Drawing Performance of a Two-Wheel Tractor.)

  • 박호석;차균도
    • Journal of Biosystems Engineering
    • /
    • 제2권1호
    • /
    • pp.25-32
    • /
    • 1977
  • This experiment was conducted in order to find out the drawing performance of a two-wheel tractor under different levels of the soil moisture and hardness, so as to obtain some basic data for improving their drawing performance. With fairly homogeneous soil, 5 levels of soil moisture contents (8, 13, 17, 20 and 23%) and 3 levels of soil hardness (0 , 2 and 4kg/$cm^2$) were selected for this experiment.The summerized results are as follows ;1. The draft force, on the hard soil (hardness ; 4kg/$cm^2$), had a distinct tendency to decrease with the increasing soil moisture. On the medium soil (hardness ; 2 kg/$cm^2$), and the soft soil (hardness ; 0kg$cm^2$), the draft force showed the highest when the moisture contents were within the range of 16-19%.But the maximum draft force, on the soft soil, was higher than that on the medium soil by 10 %. 2. The driving axle torque increased with increasing soil by 10 %. 3.The values of horizontal distance between the soil reaction point and axle shaft were within the range of 0~10cm , and it had the tendency to increase with the increasing soil moisture. Also, it s value was the largest on the hard soil and the smallest on the soft soil. 4.The tractive efficiency decreased with the increasing soil moisture. On the hard soil, the average value of tractive efficiency was higher than that on the medium soil by 19.0% and that on the soft soil was lower than that on the medium soil. 5.The traction ratio were within the range of 30 ~45%, and their changing tendency with respect to the soil moisture was similar to that in the case of the draft force. 6. The travel resistance ratio tended to increased with increasing soil moisture, and the highest value was found on the soft soil, and the lowest on the hard soil.

  • PDF

연료 소비량에 기반한 소형 경유차 대기오염물질 배출계수의 운전조건별 대표성 평가 (Evaluations for Representativeness of Light-Duty Diesel Vehicles' Fuel-based Emission Factors on Vehicle Operating Conditions)

  • 이태우;권상일;손지환;김지영;전상진;김정수;최광호
    • 한국대기환경학회지
    • /
    • 제29권6호
    • /
    • pp.745-756
    • /
    • 2013
  • The purpose of this study is to evaluate representativeness of fuel-based emission factors. Twelve light-duty diesel vehicles which meet Euro-3 to 5 legislative emission limits were selected for emission tests. Second-by-second modal emission rates of vehicles were measured on a standard laboratory chassis dynamometer system. An off-cycle driving cycle was developed as a representative Korean real-world on-road driving cycle. Fuel-based emission factors were developed for short trip segments that involved in the selected driving cycle. Each segment was defined to have unit travel distance, which is 1 km, and characterized by its average speed and Relative Positive Acceleration (RPA). Fuel-based $NO_x$ emission factors demonstrate relatively good representativeness in terms of vehicle operation conditions. $NO_x$ emission factors are estimated to be within ${\pm}20%$ of area-wide emission factor under more than 40% of total driving situations. This result implies that the fuel-based $NO_x$ emission factor could be practically implemented into the on-road emission management strategies, such as a remote sensing device (RSD). High emitting vehicles as well as high emitting operating conditions heavily affect on the mean values and distributions of CO and THC emission factors. Few high emitting conditions are pulling up the mean value and biasing the distributions, which weaken representativeness of fuel-based CO and THC emission factors.

최소 비용할당 기반 온라인 지게차 운영 알고리즘 (An Online Forklift Dispatching Algorithm Based on Minimal Cost Assignment Approach)

  • 권보배;손정열;하병현
    • 한국시뮬레이션학회논문지
    • /
    • 제27권2호
    • /
    • pp.71-81
    • /
    • 2018
  • 조선소의 지게차는 작업 특성상 무거운 물건을 상/하차하거나 이송하는 작업이 빈번하다. 작업은 동적이며 시간대별로 생성 비율이 다르다. 특히 오전과 오후 업무시간 직후에 작업 발생 비율이 높은 경향을 보인다. 이러한 상/하차 작업과 이송작업의 무게는 매번 다르며, 활용되는 지게차 역시 작업 가능한 허용무게의 제약이 있다. 본 연구에서는 지게차의 원활한 운영을 위해 최소 비용할당을 사용한 최근린 배차 규칙 알고리즘을 제안한다. 제시된 알고리즘은 다양한 종류의 지게차와 다수의 작업을 동시에 고려하여 배차를 결정하며, 지게차 종류에 따른 작업 불가능을 고려하기 위해 가상 지게차와 가상 작업을 생성하는 방법을 제안한다. 그리고 차량의 상태를 고려하여 체계적으로 지게차를 선택하는 방법도 함께 제시한다. 성능지표는 평균 공차이동거리와 평균 작업대기시간으로 한다. 성능비교를 위해 조선소의 지게차 운영방식을 모델링한 우선순위 규칙을 비교 대상으로 한다. 시뮬레이션을 통해 제시한 알고리즘의 우수성을 확인한다.