• Communications for Statistical Applications and Methods
• /
• 제6권2호
• /
• pp.413-422
• /
• 1999

Multivariate EWMA control charts to simultaneously monitor correlation coefficients of correlated quality characteristics under multivariate normal process are proposed. Performances of the proposed charts are measured in terms of average run length(ARL). Numerical results show that smalle values for smoothing constant with accumulate-combine approach are preferred for detecting smalle shifts.

• International Journal of Quality Innovation
• /
• 제4권2호
• /
• pp.65-72
• /
• 2003

This paper mainly studies to build control charts under different alarm rule. For different alarm rule, the control limit parameters of a control chart should be changed, then some kinds of control schemes under different alarm rule were compared and the methods of calculating ARL for different control schemes were given.

• 품질경영학회지
• /
• 제40권2호
• /
• pp.176-185
• /
• 2012

After a work of Derman and Ross(1997) that considered simple main runs rules and derived ARL (Average Run Length) using Markov chain modeling, $\bar{X}$ control chart based on diverse alternative main and supplementary runs rules that is the most popular control chart for monitoring the mean of a process are proposed. This paper reviews and discusses the-state-of-art researches for these runs rules and classifies according to several properties of runs rules. ARL derivation for a proposed runs rule is also illustrated.

• Communications for Statistical Applications and Methods
• /
• 제23권6호
• /
• pp.497-515
• /
• 2016

Modern processes often monitor more than one quality characteristic that are referred to as multivariate statistical process control (MSPC) procedures. The MSPC is the most rapidly developing sector of statistical process control and increases interest in the simultaneous inspection of several related quality characteristics. Most multivariate detection procedures based on a multi-normality assumptions are independent, but there are many processes that assume non-normality and correlation. Many multivariate control charts have a lack of related joint distribution. Copulas are tool to construct multivariate modelling and formalizing the dependence structure between random variables and applied in several fields. From copula literature review, there are a few copula to apply in MSPC that have multivariate control charts, and represent a successful tool to identify an out-of-control process. This paper presents various types of copulas modelling for the multivariate control chart. The performance measures of the control chart are the average run length (ARL) and the average number of observations to signal (ANOS). Furthermore, a Monte Carlo simulation is shown when the observations were from an exponential distribution.

• Journal of the Korean Data and Information Science Society
• /
• 제26권6호
• /
• pp.1593-1600
• /
• 2015

A control chart is very useful in monitoring various production process. There are many situations in which the simultaneous control of two or more related quality variables is necessary. We construct bivariate Shewhart control charts based on the trace of the product of the estimated variance-covariance matrix and the inverse of the in-control matrix and investigate the properties of bivariate Shewart control charts with VSI procedure for monitoring covariance matrix in term of ATS (Average time to signal) and ANSW (Average number of switch) and probability of switch, ASI (Average sampling interval). Numerical results show that ATS is smaller than ARL. From examining the properties of switching in changing covariances and variances in ${\Sigma}$, ANSW values show that it does not switch frequently and does not matter to use VSI procedure.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.87-98
• /
• 2005

This research investigates economic-statistical characteristics of variable sampling size and interval (VSSI)$\bar{X}$charts under two assignable causes. A Markov chain approach is employed in order to calculate average run length (ARL) and average time to signal (ATS). Six transient states are derived by carefully defining the state. A steady state cost rate function is constructed based on Lorenzen and Vance(1986) model. The cost rate function is optimized with respect to six design parameters for designing the VSSI $\bar{X}$ charts. Computational experiments show that the VSSI $\bar{X}$ chart is superior to the Shewhart $\bar{X}$ chart in the economic-statistical sense, even under two assignable causes. A comparative study shows that the cost rate may increase up to almost 30% by overlooking the second cause. Critical input parameters are also derived from a sensitivity study and a few guideline graphs are provided for determining the design parameters.

• 품질경영학회지
• /
• 제22권1호
• /
• pp.54-65
• /
• 1994

Multivariate exponentially weighted moving average (EWMA) control charts for monitoring the variance-covariance matrix are investigated. Two basic approaches, "combine-accumulate" approach and "accumulate-combine" approach, for using past sample information in the developement of multivariate EWMA control charts are considered. Multivariate EWMA control charts for monitoring the variance-covariance matrix are compared on the basis of their average run length (ARL) performances. The numerical results show that multivariate EWMA control charts based on the accumulate-combine approach are more efficient than corresponding multivariate EWMA control charts based on the combine-accumulate approach.

• Journal of the Korean Data and Information Science Society
• /
• 제24권4호
• /
• pp.919-929
• /
• 2013

We compared two basic methods, combine-accumulate method and accumulate-combine method, using the past quality information in multivariate quality control procedure for monitoring mean vector of multivariate normal process. When small or moderate shifts have occurred, accumulate-combine method yields smaller average run length (ARL) and average time to signal (ATS) than combine-accumulate method. On the other hand, we have found from our numerical results that combine-accumulate method has better performances in terms of switching behavior than accumulate-combine method. In industry, a quality engineer could select one of the two method under the comprehensive consideration about the required time to signal, switching behavior, and other physical factors in the production process.

• 품질경영학회지
• /
• 제26권1호
• /
• pp.108-125
• /
• 1998

The EWMA(Exponentially Weighted Moving Average) has recently received a great deal of attention in the quality control literature as a process monitoring tool on the shop floor of manufacturing industires, since it is easy to plot, to interpret, and its control limits are easy to obtain. Most a, pp.ications of the EWMA for process monitoring have concentrated on the problem of detecting shifts of a process mean and a process standard deviation with ARL(Average Run Length) properties. But there may be the necessity of controlling linearity on product quality such as the correlation coefficient to the process operator. Control managers may want to protect the increase of a process correlation coefficient value, such as 0, between two variables of interest. However, there are few studies concerned on this part. Therefore, we propose EWMA models for a process correlation coefficient using two transformed statistics, T-statistic and (Fisher's) Z-statistic. We also present some results of simulation by SAS/IML and compare two models.

• 응용통계연구
• /
• 제29권5호
• /
• pp.823-833
• /
• 2016

제품의 수명은 품질을 나타내는 중요한 특성치이다. 이상적으로는 모든 표본의 수명자료를 측정하는 것이 가장 바람직하나, 이를 측정하는데 많은 시간과 비용이 소요되는 경우 중도절단된 자료로 표본을 구성하는 경우가 많이 발생한다. 이 논문에서는 제1형의 우측중도절단된 수명자료가 와이블 분포를 따를 경우 척도모수의 감소를 탐지하는 이항 누적합 관리도 절차를 제안하였다. 모의실험에서 평균런길이를 이용하여 제안된 관리도 절차의 효율을 이전에 연구된 누적합 관리도 절차와 비교하였는데, 그 결과 중도절단율이 높을 경우와 표본의 크기가 적은 경우 제안된 이항 누적합 관리도가 더 효율적임을 알 수 있었다.