• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.201-211
• /
• 2022

At the center of the Noryang waterway, the Gwangyang bay area (including the Yeosu Strait) is located at the west, and the Jinju bay area (including Gangjin bay and Sacheon bay) is located at the east. Freshwater from several rivers is flowing into the study area. In particula,r the event of flood, great quantities freshwater flow from Seomjingang (Seomjin river) into the Gwangyang bay area and from Gahwacheon (discharge from Namgang Dam) into the Jinju bay. The Gwangyang and Jinju bay are connected to the Noryang waterway. In addition, freshwater from Seomjingang and Gahwacheon also affect through the Noryang waterway. In this study, we elucidated the characteristics of the tidal exchange rate and residence time for dry season and flood season on 50 frequency, considering freshwater from 51 rivers, including Seomjingang and Gahwacheon, using a particle tracking method. We conducted additional experiments to determine the effect of freshwater from Seomjingang and Gahwacheon during flooding. In both the dry season and flood season, the result showed that the particles released from the Gwangyang bay moved to the Jinju bay through the Noryang waterway. However, comparatively small amount of particles moved from the Jinju bay to the Gwangyang bay. Each experimental case, the sea exchange rate was 44.40~67.21% in the Gwangyang bay and 50.37~73.10% in the Jinju bay, and the average residence time was 7.07~15.36days in the Gwangyang bay and 6.45~12.75days in the Jinju bay. Consequently the sea exchange rate increased and the residence time decreased during flooding. A calculation of cross-section water flux over 30 days for 7 internal and 5 external areas, indicated that the main essential flow direction of the water flux was the river outflow water from Seomjingang flow through the Yeosu strait to the outer sea and from Gahwacheon flow through Sacheon bay, Jinju bay and the Daebang waterway to the outer sea.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.67-76
• /
• 2022

The furniture industry has a high possibility to create value-added and a high potential to create new occupations due to the characteristics of the industry, which mainly consists of small and medium-sized enterprises (SMEs). However, the used furniture, which has sufficient reuse value, is also crushed and used as solid refuse fuel (SRF) recently. Besides, the number of waste treatment companies continues to decrease, and it occurs congestion of wood waste. As a way to solve the issue, a business model development of remanufacturing used furniture can be suggested as an alternative due to its high circular economic efficiency. Remanufacturing business including furniture industry creates positive effects in various aspects such as economic, environmental and job creation. In other words, remanufacturing is an effective recycling way to reduce input resources and energy in the production process. The results of economic analysis show that the expected annual revenue from the single worker furniture remanufacturing site was 104 million won which is 3.11 times more than the average income of a single-worker household in Korea and its B/C ratio was estimated about 30 which means high business feasibility. Revenue through furniture remanufacturing also showed 320 times higher than that of SRF production from the perspective of weight. In addition, it is shown that the GHGs reduction from the furniture remanufacturing is 2.2 ton CO₂-eq. per year, which is similar to the amount of GHGs absorption effect of 937 pine trees or 622 Korean oak trees annually. Thus the results of this study demonstrate that it is important to adopt an appropriate recycling method considering the economic and environmental effects at the end-of-life stage.

• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.260-270
• /
• 2022

In this study, we tested for pesticide residues in 114 samples representing 20 different types of fruit circulating in Gyeonggido. A total of 341 pesticides were identified via a multi-residue method using GC-NPD, GC-ECD, GC-MSMS, and LC-MSMS. In whole fruit, pesticides were detected in 48 cases, with a concentration range of 0.0025-0.1663 mg/kg. In the peels, pesticides were detected in 85 cases, with a concentration range of 0.0026-4.7185 mg/kg and a higher average concentration than was found in whole fruit. In the pulp, pesticides were detected in 8 cases, with a concentration range of 0.0021-0.0993 mg/kg. In most of the peels, pesticides were detected below MRL. In the kiwi peel, deltamethrin (with an MRL of 0.05 mg/kg) was detected at 0.1020 mg/kg. Since MRLs are applied to whole fruit, these levels are not unsuitable for ingestion. However, washing is recommended before ingestion to promote healthier and safer inclusion of the peel in the diet. Continuous monitoring of the peel and pulp is indicated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.5
• /
• pp.413-423
• /
• 1990

Corn proteins have been known as nutritionally poor, being deficient in the essential amino acids. lysine and tryptophan. Improving the quality of protein in the corn grain would be a great benefit to the farmer. This study was conducted to evaluate the variation of the protein content and the protein constitution of the maize germplasms in the Crop Experiment Station in 1989. The average protein content of 101 germplasms was 11.5% with range from 8.0% to 17.3%. Elite hybrid field corns and table corns possessed 9.1-13.9% protein for the dried whole kernel. Major amino acids were glutamic acid and leucine. Lysine and methionine were limited. Varietal differences were observed in the amino acid composition. Qpm, a modified opaque-2 mutant had 1.4-1.7 times higher lysine content than Suwon 19, a dent corn and Suwon SS-21, a sweet corn. Suwon SS-21 had high threonine content. Maize seed protein gave three fractions. an alchol-soluble fraction (zein), an alkali-soluble fraction (glutelin), and a salt-soluble fraction (globulin) by the Osborne method. The zein fraction accounted respectively for 50.7% and 41.7% of the total protein is Suwon 19 and Suwon SS-21. The nonzein fractions increased in percentage of total protein in Qpm kernels. The amino acid composition of zein fraction from three types maize endoperms of dent, sweet and opaque-2 was essentially identical. Zein contained the high contents of glutamic acid and leucine but low content of lysine. The glutelin fractions of three types maize endosperms were mainly similar in overall amino acid composition. The lysine content of glutelin was higher than that of zein. The amino acid composition of globulin fraction was some different from those of zein and glutelin In Qpm it had higher levels of histidine and lysine than both of zein and glutelin. The increased lysine content in Qpm was resulted from changing the proportions of proteins which contained different levels of lysine.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.1-25
• /
• 2023

ESG management is becoming a necessity of the times, but there are about 600 ESG evaluation indicators worldwide, causing confusion in the market as different ESG ratings were assigned to individual companies according to evaluation agencies. In addition, since the method of applying ESG was not disclosed, there were not many ways for companies that wanted to introduce ESG management to get help. Accordingly, the Ministry of Trade, Industry and Energy announced the K-ESG guideline jointly with the ministries. In previous studies, there were few studies on the comparison of evaluation grades by ESG evaluation company or the application of evaluation diagnostic items. Therefore, in this study, the ease of application and improvement of the K-ESG guideline was attempted by applying the K-ESG guideline to companies that already have ESG ratings. The position of the K-ESG guideline is also confirmed by comparing the scores calculated through the K-ESG guideline for companies that have ESG ratings from global ESG evaluation agencies and domestic ESG evaluation agencies. As a result of the analysis, first, the K-ESG guideline provide clear and detailed standards for individual companies to set their own ESG goals and set the direction of ESG practice. Second, the K-ESG guideline is suitable for domestic and global ESG evaluation standards as it has 61 diagnostic items and 12 additional diagnostic items covering the evaluation indicators of global representative ESG evaluation agencies and KCGS in Korea. Third, the ESG rating of the K-ESG guideline was higher than that of a global ESG rating company and lower than or similar to that of a domestic ESG rating company. Fourth, the ease of application of the K-ESG guideline is judged to be high. Fifth, the point to be improved in the K-ESG guideline is that the government needs to compile industry average statistics on diagnostic items in the K-ESG environment area and publish them on the government's ESG-only site. In addition, the applied weights of E, S, and G by industry should be determined and disclosed. This study will help ESG evaluation agencies, corporate management, and ESG managers interested in ESG management in establishing ESG management strategies and contributing to providing improvements to be referenced when revising the K-ESG guideline in the future.

• Journal of Nutrition and Health
• /
• v.56 no.4
• /
• pp.439-453
• /
• 2023

Purpose: Concerns about accelerated aging are regularly being discussed. This study analyzed the dietary status and nutritional intake of college students who are about to enter their 30s and 40s. We further suggest ways to eat healthily. Methods: Totally, 67 students attending Daegu Catholic University were provided with a three-day meal record and analyzed. Results: The average demographics of the subjects were as follows: age 23.2 ± 2.0 years, height 165.1 ± 9.0 cm, weight 65.4 ± 13.6 kg, and BMI 23.5 ± 3.9 kg/m². Overall, 76.3% of the subjects skipped breakfast. The food intake evaluation according to the food group intake pattern and the recommended number of servings determined that 38.3% of the subjects did not consume fruits and dairy products (GMVFDS = 111001), and both men and women lacked all food groups. Analysis of the nutrient intake state revealed lesser nutrient intake than the estimated energy need. Evaluation of the %RDA found that consumption of phosphorus was above the recommended amount, whereas all other nutrients were below the recommended amount. Men had a higher intake rate of phosphorus (p < 0.01), iron (p < 0.001), and sodium (p < 0.05) than women, whereas the intake rate of dietary fiber was higher in women (p < 0.05). Evaluation of the food intake by 22 food categories revealed that intake of regular grains was more in men than in women (p < 0.05) whereas women consumed significantly more mixed grains (p< 0.01). In protein foods, men consumed more meat (p < 0.01), while women consumed more eggs (p < 0.05) and beans (p < 0.05). Evaluating the fruit intake, juices were more frequently consumed by men than by women (p < 0.05). No differences were obtained in food intake and nutrient intake status according to obesity. Conclusion: Based on these results, there is an urgent requirement for attention and support for university cafeterias in order to induce changes in the eating habits of college students. Among other initiatives, this can be achieved by providing diet improvement programs and menus that consider food preferences.

• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.273-288
• /
• 2023

Although many studies have been conducted on techniques and effects that can be applied to forest meditation in domestic forest healing meditation research, there has been little research on the space where forest meditation takes place. Nevertheless, a meditation space is not just a place concept but a forest environment element responsible for the healing function of a forest, i.e., a place containing healing factors, and can be an essential clue to the healing mechanism. Therefore, to determine whether a healing forest meditation space is suitable for meditation, this study selected the attribute items of the meditation space using the Delphi expert survey and then surveyed the user satisfaction of the healing forest meditation space using the IPA (Importance Performance Analysis) technique. The survey was conducted from August to November 2022, targeting 315 adults who used the forest meditation space at the National Center for Forest Therapy, the Saneum Healing Forest, and the Jathyanggi Pureunsup Arboretum in Gyeonggi Province. The result of the IPA analysis showed the average satisfaction with the forest meditation space was relatively high at 4.33 points on a 5-point Likert scale (4.33 points for the National Center for Forest Therapy, 4.34 points for the Saneum Healing Forest, and 4.37 points for the Jathyanggi Pureunsup Arboretum), indicating that the three healing forest meditation spaces were suitable for forest meditation. Satisfaction with the "Sounds of nature" was high in all three forests. On the other hand, all three forests showed a relatively low satisfaction with "Quietness," indicating it to be a priority problem to be addressed. Also, an open-ended questionnaire survey showed that the mediation space's natural elements, such as natural sounds, scenery, air, forest spaces, and scents, had a higher positive impact on meditation satisfaction than artificial elements, such as facilities. Therefore, it is essential to secure sound resources such as the sound of water and birds around the meditation space, and it is also necessary to consider ways to create a meditation forest in an independent area to avoid encounters with visitors and allow only participants in the forest healing meditation program to enter to increase satisfaction with forest meditation.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.116-121
• /
• 2023

In this paper, we develop a deep learning structure for a complex microbial incubator that applies deep learning prediction result information. The proposed complex microbial incubator consists of pre-processing of complex microbial data, conversion of complex microbial data structure, design of deep learning network, learning of the designed deep learning network, and GUI development applied to the prototype. In the complex microbial data preprocessing, one-hot encoding is performed on the amount of molasses, nutrients, plant extract, salt, etc. required for microbial culture, and the maximum-minimum normalization method for the pH concentration measured as a result of the culture and the number of microbial cells to preprocess the data. In the complex microbial data structure conversion, the preprocessed data is converted into a graph structure by connecting the water temperature and the number of microbial cells, and then expressed as an adjacency matrix and attribute information to be used as input data for a deep learning network. In deep learning network design, complex microbial data is learned by designing a graph convolutional network specialized for graph structures. The designed deep learning network uses a cosine loss function to proceed with learning in the direction of minimizing the error that occurs during learning. GUI development applied to the prototype shows the target pH concentration (3.8 or less) and the number of cells (10⁸ or more) of complex microorganisms in an order suitable for culturing according to the water temperature selected by the user. In order to evaluate the performance of the proposed microbial incubator, the results of experiments conducted by authorized testing institutes showed that the average pH was 3.7 and the number of cells of complex microorganisms was 1.7 × 10⁸. Therefore, the effectiveness of the deep learning structure for the complex microbial incubator applying the deep learning prediction result information proposed in this paper was proven.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.676-683
• /
• 2022

Due to the effects of rapid changes in the living environment since 2000 and the recent unforeseen pandemic, people are refraining from domestic and international traveling and movement, and outdoor activities for health and the public value of forest trails, called Dullegil Trail in Korea, have become more important. This study estimated the environmental value of the tentatively named "East-West Trail," which connects the forest trails crossing Chungcheong and Gyeongsang Provinces using CVM (Contingent Valuation Method). It surveyed visitors to the East-West Trail, and 725 questionnaires were used for analysis. The average characteristics of respondents were those who exercised 2-3 times per week, visited a forest trail not far from their residence with friends or family, and showed a tendency to spend 50 thousand Korean won or more per visit. Visitors to the Dullegil Trail felt that there was a shortage of information boards on the forest trail, and they preferred a shelter in appropriate locations. We used a double-bounded dichotomous choice (BDDC) logit model proposed by Hanemann to measure the conservation value of the East-West Trail. It was estimated that the environmental value that a visitor to the East-West Trail could obtain was 30,087 won per trip. The estimated environmental value of the East-West Trail can be converted to about 94 billion won total visitors annually based on the population belonging to the direct-use zone near the East-West Trail. As there has been no study on the environmental value of forest trails using CVM, the results of this study will be able to suggest the feasibility of the government policies on forest trails.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.137-159
• /
• 2017

This study divides manufacturing in 18 countries including Korea, China, Japan and OECD countries into 11 areas and estimates and compares the technological efficiency of each industry. The traditional view of productivity is to increase production capacity through technological innovation or process innovation, but it is also influenced by the technological efficiency of production process. A Stochastic Frontier Production Model (SFM) is a representative method for estimating the technical efficiency of such production. First, as a result of estimating the production function by setting the output variable as total output or value-added, in both cases, the output increased significantly in all manufacturing sectors as inputs of labor, capital, and intermediate increased. On the other hand, R&D investment has a large impact on output in chemical, electronics, and machinery industries. Next, as a result of estimating the technological efficiency through the production function, when the total output is set as the output variable, the overall average of each sector is 0.8 or more, showing mostly high efficiency. However, when value-added was set, Japan had the highest level in most manufacturing sectors, while other countries were lower than the efficiency of the total output. Comparing the three countries of Korea, China and Japan, Japan showed the highest efficiency in most manufacturing sectors, and Korea was about half or one third of Japan and China was lower than Korea. However, in the food and electronics sectors, China is higher than Korea, indicating that China's production efficiency has greatly improved. As such, Korea is not able to narrow its gap with Japan relatively faster than China's rapid growth. Therefore, various policy supports are needed to promote technology development. In addition, in order to improve manufacturing productivity, it is necessary to shift to an economic structure that can raise technological efficiency as well as technology development.