• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.88-93
• /
• 1962

The telomerization of vinyl acetate with carbon tetrachloride, chloroform and monochlorobenzene were investigated with respect to the synthesis of those telomers, properties and molecular weights of the formed telomers, and reaction mechanisms. Vinyl acetate reacted with carbon tetrachloride and chloroform to form telomers at 70-90$^{\circ}C$ and 60-70$^{\circ}C$, respectively and it formed polymer with monochlorobenzene. As a chain transfer agent, carbon tetrachloride was more effective than chloroform. In the telomerization of vinyl acetate and carbon tetrachloride: 1) The average molecular weight of the telomer decreased as the mole ratio of carbon tetrachloride to vinyl acetate increased. The optimum conditions for the highest yield of the telomer were as follows: Mole ratio of carbon tetrachloride to vinyl acetate : 2.5 Reaction time : 20 hours. 2) As the reaction proceeded, the refractive index and average molecular weight of the telomer increased rapidly in the first 10 hours but the increase was slow through the next 10 hours, so that, the average recurring number(n) of taxogen in the final product reached an almost definite value, i.e., 3. The telomer formed in the telomerization of vinyl acetate with carbon tetrachloride and chloroform turned to brown color in the air due to decomposition or polymerization. The suggested telomerization mechanism was supported by the hexachloroethane detected in the course of reaction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.6
• /
• pp.734-743
• /
• 1999

The local Nusselt numbers have been measured for a round turbulent jet impinging on the concave surface with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured using liquid crystal and a digital color image processing system. The experiments were made for the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 4 to 10, the dimensionless surface curvature (d/D) 0.056, and the rib type (height ($d_1$) 0.2 cm, pitch (p) from 1.2 to 3.2 cm). It was founded that only when $L/d{\geq}6$, the average Nusselt numbers on the concave surface with rib are higher than those without rib, mainly due to an increase in the turbulent intensity caused by the effect of rib attached to the wall surface. It was realized that the rib attached to the concave surface may no longer enhance the heat transfer rate or even lowers it depending on the rib type and flow conditions. In addition, the results by the steady-state method using the gold-film Intrex were in good agreement with those by the transient shroud method.

• Korean Journal of Agricultural Science
• /
• v.25 no.1
• /
• pp.6-11
• /
• 1998

Bean sprout is one of the traditional vegetable in Korea and produced by sprouting soybean (Glycine max L.) cultivars. This experiments was conducted to investigate the ecological characteristics in collected small grain soybean lines from Chungnam province region. Thirty varieties were used in this study. Seed coat color of collected small soybean lines showed eight different types. Major seed coat color type was yellow as 8 lines of total 35 lines. The stem height, number of nodes and number of branches averaged 58.5 cm, 16.5 nodes and 11.8 branches, respectively. The average number of main stem pods and number of branching pod were appeared 43.1 and 62.7 respectively. One hundred seed weight averaged 9.9g which was lower than 10~12g of sprouting soybean cultivars as breeding goal of Korea. The average of node width showed 13.2cm and long stem open types and short stem close types were classified 1 line and 14 lines. The flower dates of collecting small soybean lines were between 8 Aug. and 13 Aug. and flowering duration was 74~85 days. The date of maturity were between 12 Sep. and 12 Oct., and maturity duration showed great variation among cultivated soybean lines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.687-696
• /
• 2014

This paper presents a semantic object extraction method using user's stroke input, color, and depth information. It is supposed that a semantically meaningful object is surrounded with a few strokes from a user, and has similar depths all over the object. In the proposed method, deciding the region of interest (ROI) is based on the stroke input, and the semantically meaningful object is extracted by using color and depth information. Specifically, the proposed method consists of two steps. The first step is over-segmentation inside the ROI using color and depth information. The second step is semantically meaningful object extraction where over-segmented regions are classified into the object region and the background region according to the depth of each region. In the over-segmentation step, we propose a new marker extraction method where there are two propositions, i.e. an adaptive thresholding scheme to maximize the number of the segmented regions and an adaptive weighting scheme for color and depth components in computation of the morphological gradients that is required in the marker extraction. In the semantically meaningful object extraction, we classify over-segmented regions into the object region and the background region in order of the boundary regions to the inner regions, the average depth of each region being compared to the average depth of all regions classified into the object region. In experimental results, we demonstrate that the proposed method yields reasonable object extraction results.

• Development and Reproduction
• /
• v.21 no.3
• /
• pp.287-295
• /
• 2017

This study was conducted to observe egg and larvae morphological development of carp to obtain basic data for resource conservation and taxonomic research. Brood carp used in the research (total length 67.3-75.5 cm, average $71.0{\pm}3.45cm$) were bred in a circular rearing aquarium ($600{\times}300{\times}100cm$) using a running water system from January to July, 2015. Breeding water temperature was maintained at $23.0-25.0^{\circ}C$(average $24.0^{\circ}C$). Fertilized carp eggs were translucent and globular, and their size was 1.75-1.89 mm (average $1.82{\pm}0.06mm$). Blastoderms formed 10 min after fertilization and reached the two-cell stage 30 min after fertilization. Then, the embryo turned dark and exhibited melanophores, and blood started flowing from the heart across the egg yolk at 42 hrs and 50 min after fertilization. Hatching began 70 hrs and 26 min after fertilization larvae emerged through the egg membrane, starting from the head. The length of prelarvae immediately after hatching was 5.23-5.38 mm (average $5.31{\pm}0.11mm$) the mouth and anus were closed, and the pectoral fin was formed. Postlarvae at 18 days after hatching had a total length of 11.9-13.9 mm (average $12.9{\pm}1.40mm$), separate anal fin and back membranes, and fin ray. Juveniles fish at 35 days after hatching had a total length of 29.9-30.2 mm (average $30.1{\pm}0.13mm$), with the body covered with scales, and the same number of fin rays, color, and shape as their broodstork.

• Korean Journal of Organic Agriculture
• /
• v.11 no.3
• /
• pp.75-90
• /
• 2003

A total of 192 Korean landraces were investigated for the comparison of each other as useful germplasm to organic farming and examined correlation between quantitative traits. Almost Korean landraces were classified into medium-heading variety and average days from seeding to heading was 111.1 days. Plant height and culm length were longer about 20∼40cm than general Japonica cultivar. Average width of leaf blade and average length of panicle were 1.3cm and 22.4cm, respectively, Average number of panicles per plant was 10.0 and almost varieties showed low tilling habit. Average length/width ratio of brown rice was 1.7 and several varieties were long grain type and average 1,000 grain weight was 21.6g. In correlation coefficient among quantitative traits, positive significant correlations were observed between culm length and leaf width, days from seeding to heading, but negative correlations were observed between days from seeding to heading and 1000 grain weight. 27.1% of Korean landraces showed weak and lodging degree in culm strength and 3.6% of total varieties showed purple margin on leaf blade and leaf sheath. In leaf blade angle and flag leaf angle, erect type was 46.9% and 10.9%, respectively. 24.0% of total varieties showed the slow and late degree of leaf senescence. The rate of awned type, waxy type and brown seed coat were 74.5%, 20.3% and 4.2%, respectively. The color of stigma, spikelet, apiculus and awn showed diverse color such as white, brown, red and purple.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.216-220
• /
• 2018

Freesia (Freesia hybrida Hort.) 'Sweet Lemon' was developed for the cut flowers in National Institute of Horticultural Herbal Science, Rural Development Administration, Korea in 2015. This hybrid was crossed and selected from 'Teresa' and 'Yvonne' in 2007. Morphological characteristics of the selected freesia hybrid were investigated for 5 years from 2009 to 2014, and then it was named 'Sweet Lemon' in 2015. 'Sweet Lemon' has double and lemon petals (RHS color chart Y2B). The average flower diameter was 6.8 cm and the average yield is 6.7. The growth of the plant is vigorous and the average plant height is 99.0cm, which is 34.7cm higher than the standard cultivar 'Yvonne'. The average floret number per stalk of 'Sweet Lemon' was 10.7, and stalk length was 7.7 cm. The average days to first flowering of 'Sweet Lemon', 126 days, was approximately 20 days earlier than the control cultivar. It's average vase life and yield is 8.7 days and 5.6 cormlets per plant, respectively. Totally 58 of volatile compounds were identified using gas chromatography-mass spectrometry (GC-MS), the major components were linalool, alpha-terpineol, alpha-selinene, and limonene.

• Journal of Fashion Business
• /
• v.3 no.1
• /
• pp.113-124
• /
• 1999

The purpose of this study is to provide for the basic data useful to designing a scientific and systematic merchandising program for infants' wear brands. For this purpose, designer and MD working for 8 local infants' wear brands were surveyed to analyze the conditions of their designing and merchandising of infants' wears. The results of this study can be summarized as follows; 1. Only 3 brands employed MD for their merchandising departments. The average number of clothing designers employed by the subject brands was 3-5, while that of colorists was 1-2, and that of accessory designers was 2-3. On the other hand, the average number of patternmakers employed was about 1, while that of sewer was 4. 2. Many of the sample infants' wear brands tended to collect and analyze the information for merchandising, while most of them relied less on outside planned data. The information source upon which they relied most was 'local and foreign fashion magazine', followed by 'data surveyed by local and foreign department stores' and 'data surveyed for local fabric markets' in their order. Meanwhile, the main color represented 70-90% of the total colors, while the pastel groups accounted for 30-40% and vivid color groups for 40-50%. On the other hand, knit accounted for about 60% of their materials, while woven and sweater accounted for 30% and 10%, respectively. 3. In overall terms, most of brands felt that their brands were preferred as much as or less than their competitive brands, while consumers felt expensive for infants' wears. Namely, most consumers were dissatisfied with the price levels of infants' wears. On the other hand, consumers were found to favor the pastel color groups a little more, while being aware of each brand's sizes more or less precisely. 4. The medium upon which the infants' wear brands depended most for their advertisement was 'magazine', followed by 'radio' and 'catalogue' in their order. Most of them were analyzing the results of their sale turnover monthly or frequently in order to review their sales performances in comparison with their competitors. Most of brands bothered to program a sale strategy 4 times a year, primarily to dispose the stocks or find a breakthrough for their sales activities.

• International Journal of Contents
• /
• v.10 no.3
• /
• pp.17-25
• /
• 2014

In this paper, we describe an adaptive Markov chain Monte Carlo-based particle filter that effectively addresses real-time multi-face tracking on mobile platforms. Because traditional approaches based on a particle filter require an enormous number of particles, the processing time is high. This is a serious issue, especially on low performance devices such as mobile phones. To resolve this problem, we developed a tracker that includes a more sophisticated likelihood model to reduce the number of particles and maintain the identity of the tracked faces. In our proposed tracker, the number of particles is adjusted during the sampling process using an adaptive sampling scheme. The adaptive sampling scheme is designed based on the average acceptance ratio of sampled particles of each face. Moreover, a likelihood model based on color information is combined with corner features to improve the accuracy of the sample measurement. The proposed tracker applied on various videos confirmed a significant decrease in processing time compared to traditional approaches.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.1
• /
• pp.111-122
• /
• 1995

12 populatiDns of Ch indicum L. and it's variation antogenous in Tforea were selected throughout the country and their morphological characteristics were studied in this paper. The results are as follows. 1) The mean of the plant height is 97.3cm. Ch. indicunl is 76.5cm and Ch. boreale is 116. 6cm in height. The number of nodes is 58 on the average. The color of the stem is generally black-red in the case of Ch. indicum and is green for Ch. boreale. 2) The leaves of Ch. inficum are smaller In size and thicker than chose of Ch. boreale, and it has a stipule. This fact enables us to distinguish one species from the other, however, the Gyukpo-population of Ch. indicum has a large leaf, and Byunsan-population of Ch. boreale has a stipule so that the above fact is not an exact criterion on which to base one classification. 3) The size of the capitulum is 24.9mm for Ch. indicum and 15.6mm in the case of Ch. boreaje so that the difference between species is admitted. It was confirmed hat the size of the capitulum has positive correlation to that of the pedicel and has egative correlation to the number of flowers, so that of inflorescence, Ch. indicumhas corymb, and Ch. boreale has crowed corymb or umbel-type.The number of ligulates is 19 on the average, which no the difference being founnd between species and populations.4) The cluster analysis of morphological characteristics showed that Ch. indicum wasdivided into two groups, which was shown thought to be due to the difference of speciesbetween Ch. indicum and Ch. boreale. However, it could not be shown that their morphological characteristics explain a geographical relationship between populations