• Journal of Preventive Medicine and Public Health
• /
• v.47 no.1
• /
• pp.18-26
• /
• 2014

The purpose of this study was to establish food ingestion factors needed to assess exposure to contaminants through food ingestion. The study reclassified the raw data of the Korean National Health and Nutrition Examination Survey in 2001 into 12 subcategories including grain products, meat products, fish and shellfish, and vegetables for international comparability of exposure evaluation. The criteria for food intake calculation were unified according to the characteristics of food groups, and recommended values for food ingestion factors were calculated through moisture correction and recategorization of cooked, processed, and mixed foods for each group. The average intake rate for grain and grain products was 6.25 g/kg-d per capita and the men's intake rate was approximately 8% higher than that of the women. The average intake rate of meat and meat products was 1.62 g/kg-d per capita and the men's intake rate was 30% higher than that of the women, on average. The average intake rate of fish and shellfish was 1.53 g/kg-d per capita, and the age groups of 1 to 2 and 3 to 6 recorded higher capita intake rates than other age groups, 2.62 g/kg-d and 2.25 g/kg-d, respectively. The average intake rate of vegetables was 6.47 g/kg-d per capita, with the age group of 1 to 2 recording the highest per capita intake rate of 9.79 g/kg-d and that of 13 to 19 recording the lowest mean. The study also offers recommended values for food ingestion factors of other food groups by gender, age, and region. The food ingestion exposure factors will need future updates in consideration of ongoing changes in food consumption behavior.

• Journal of the Korean Ceramic Society
• /
• v.47 no.1
• /
• pp.71-74
• /
• 2010

We have investigated protonic conduction in highly dense (>98%) polycrystalline Y-doepd $BaZrO_3$ (BYZ) ceramic with an average grain size of ~85 nm. It is observed that the protonic conductivity across the grain boundaries in this nano-crystallilne BYZ (n-BYZ) is significantly higher than the microcrystalline counterpart. Such a remarkable enhancement in grain boundary conductivity results in high overall conductivity that may allow this chemically stable protonic conductor to serve as a solid electrolyte for low-temperature solid oxide fuel cell applications.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.405-412
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) to 16.7%(w.b) moisture contents using the prototype dryer. The average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to the conventional natural air dryer where is grains were not circulated during drying periods. The dryer performance evaluation index was 738.3KJ/(kg.water), which was more effective than that of grain circulation t)pe hot air dryer(3,500-5,000 KJ/kg.water).

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.324-329
• /
• 2012

Mg-(9-x)Sn-xAl-1Zn (x=1, 2, 3 and 4 wt.%) alloys were subjected to indirect extrusion, and the microstructure and mechanical properties of the as-extruded Mg-Sn-Al-Zn (TAZ) alloys were investigated. The TAZ 811 alloy exhibited a finer grain structure than the TAZ 541 alloy due to a larger number of Mg2Sn particles, which pinned the grain boundaries and prevented growth of recrystallized grains. The TAZ alloys showed an unusual yield asymmetry behavior. The tension-compression yield asymmetry increased with decreasing average grain size. The TAZ 811 alloy with a small grain size exhibited a larger yield asymmetry than that of the TAZ 541 alloy having a relatively large grain size, which is mainly attributed to the low Al content and large number of second phase particles in the TAZ 811 alloy.

• Proceedings of the KWS Conference
• /
• 2001.10a
• /
• pp.220-222
• /
• 2001

The average grain size, the grain-size distribution, the morphology and the microstructure are fundamental characteristics of a spraying powder. Now that the significance of the grain size for the pattern of properties of the powder has been recognised, greater consideration is also being given to it in standards and regulations. However, unfortunately, the processes according to which the grain size and the grain-size distribution must be determined are specified in the rarest of cases. The contribution therefore dealt with the comparison of different particle-size measuring techniques, such as diffraction spectroscopy, sedimentation, sieving and microscopic measurement. The comparability of the measured results was investigated on twelve plasma spraying powders with different compositions, nominal sizes and morphologies.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.1
• /
• pp.11-17
• /
• 2016

Dredging and land reclamation works has actively carried out for the efficient use of land and secure of agricultural and industrial site. During the reclamation, a portion of landfills are lost from the desired location due to a variety of causes. However, these causes has been rarely studied, and water flow velocity has a great influence on the movement of landfills. For the economical and efficient reclamation, it is important to predict the movement of landfills in water. In this paper, an experimental study was carried out to investigate the deposition distance according to the flow velocity and soil grain size. We have made a large open-channel apparatus that can reproduce a laminar flow, and the deposition test was carried out on the four grain size (0.638, 1.425, 3.375, 7.125 mm) and four flow velocity (0.1, 0.3, 0.5, 0.67 m/s) with high definition video recording. As a results, average deposition distance increased with the flow velocity, and its relationship is shown linearly. For the grain size, the average deposition distance were drastically increased as the grain size becomes smaller.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.701-705
• /
• 2002

High temperature tensile test has been performed at $450^{\circ}C$ at different strain rate with various grain size due to different reduction rate of Al-4wt%Mg-0.4wt%Sc alloy which is known to be one of useful superplastic alloys. The grain size of Al-4wt%Mg-0.4wt%Sc alloy is $67~100\mu\textrm{m}$ which is courser than that of the alloy which is commonly used as the superplastic material. The total elongation of the Al-4wt%Mg-0.4wt%Sc alloy is strongly dependent on the average grain size, and is a linear function of the inverse average grain size for the present alloy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.386-391
• /
• 1988

Five barley crosses and their progenies (F$_2$, F$_3$, and F$_4$) were evaluated the potentiality of hybrid populations to segregate superior yielders in later generation. Four characters used for evaluation were number of spike, number of grain, spike weight and grain weight per plant. Superiority value (Y) of number of spike was best in SB76588${\times}$SB72648 and average of superior plants in F$_4$, was excellent in this cross. Milyang 6${\times}$Suwon 203 showed high Y value and average of F$_4$ superior plants in the number of grain. Spike weight showed the highest Y value and excellent averages of superior plant in Milyang 6${\times}$Suwon 203. Superiority value of grain weight per plant coincided with average of F$_4$ superior plants in 3 crosses and SB76588${\times}$SB72648 was the best among the crosses.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.1
• /
• pp.17-22
• /
• 2004

In the present study, newly developed spark plasma sintering(SPS) technique was introduced to refine the grain size of ${\gamma}$-based TiAl intermetallic compounds. Ti-46Al-1.5Mo and Ti-46Al-1.5Mo-0.2C(at%) prealloyed powders were produced by mechanical milling(MM) in high-energy attritor. The mechanically milled powders were characterized by XRD and SEM for the microstructural evolution as a function of milling time. And then, the MMed powders were sintered by both spark plasma sintering and hot pressing in vacuum (HP). After the sintering process, MM-SPSed specimens were heat-treated in a vacuum furnace (SPS-VHT) and in the SPS equipment(MM-SPS) for microstructural control. It was found from microstrutural observation that the microstructure consisting of equiaxed ${\gamma}$-TiAl with a few hundred nanometer in average size and ${\alpha}_2-Ti_3Al$ particles were formed after both sintering processes. It was also revealed from hardness test and three-point bending test that the effect of grain refinement on the hardness and bending strength is much higher than that of carbon addition. The fully lamellar microstructures, which is less than $80{\mu}m$ in average grain size was obtained by SPS-VHT process, and the fully lamellar microstructure which is less than $100{\mu}m$ in average grain size was obtained by MM-SPS for a relatively shorter heat-treatment time.

• Journal of Radiation Industry
• /
• v.8 no.3
• /
• pp.141-146
• /
• 2014

Nickel (Ni) electroplating was implemented by using a metal Ni powder in order to establish a $^{63}Ni$ plating condition on the PN junction semiconductor needed for production of beta-voltaic battery. PN junction semiconductors with a Ni seed layer of 500 and $1000{\AA}$ were coated with Ni at current density from 10 to $50mA\;cm^{-2}$. The surface roughness and average grain size of Ni deposits were investigated by XRD and SEM techniques. The roughness of Ni deposit was increased as the current density was increased, and decreased as the thickness of Ni seed layer was increased. The results showed that the optimum surface shape was obtained at a current density of $10mA\;cm^{-2}$ in seed layer with thickness of $500{\AA}$, $20mA\;cm^{-2}$ of $1000{\AA}$. Also, pure Ni deposit was well coated on a PN junction semiconductor without any oxide forms. Using the line width of (111) in XRD peak, the average grain size of the Ni thick firm was measured. The results showed that the average grain size was increased as the thickness of seed layer was increased.