• Journal of Biosystems Engineering
• /
• v.9 no.1
• /
• pp.22-33
• /
• 1984

Husk separator is an indispensable equipment in rice milling plants. However, any basic research on the designing and operating criteria of the husk separator have rarely been conducted in Korea. According to the survey results reported recently, grain loss occurs in the process of rice husk separation at custom rice milling plants in Korea and the performance of husk separator has also not been identified. With this regard this study was conducted with a typical commercial husk separator to investigate the effect of the operational factors such as feed rate, blower speed and opening ratio on the velocity distribution in the air duct and the performance of the separator. The results are summerized as follows: 1. The average wind velocity in the primary air duct increased linearly with the blower rpm and the size of air inlet port in both cases of double type and single type operations. 2. The coefficient of variation in the horizontal wind velocities in the primary air duct was the minimum when the opening ratio was 0.22 ($0.052m^2$ of air inlet port) in both cases of single type and double type operations regardless of the blower speeds used in this test. The average wind velocity at the upper part of air duct was greater by 2-5 m/s than the velocity at the bottom part in double type operation. In case of single type operation, however, the average velocity in the middle part was greater than the upper or bottom part when the opening ratio was greater than 0.74. 3. The relationship between the overall effectiveness of separation(Ed for double type and Es for single type) and the average wind velocity (Va) in the primary air duct was expressed in the following quadratic functions. $$Ed=-190.84+106.18Va-10.052Va^2$$ ($r^2$ = 0.97782) $$Es=-223.76+106.23Va-9.1935Va^2$$ ($r^2$ = 0.97029) The average wind velocity required to obtain the overall effectiveness of separation more than 80% ranged from 4.04 m/sec to 5.84 m/sec in case of double type operation, and from 4.70 m/sec to 6.20 m/sec in case of single type. 4. An optimum wind velocity can be obtained with an increase in the blower speed or the size of air inlet port as presented in Figure 8. There was a tendency that the faster the blower speed, the narrower the control range of the air inlet port. 5. The feed rates (1850kg/hr and 2100kg/hr) adopted in this experiment did not bring about a significant difference in both the overall effectiveness of separation and the power consumption. 6. The energy consumption increased cubically with the blower speed but linearly with the size of the air inlet port. On the basis of the results described in items 1, 3, and 6, it would be more economic to adjust the size of the air inlet port larger with a relatively low blower speed than to adjust the size smaller with a relatively high speed.

• Journal of Community Nutrition
• /
• v.7 no.3
• /
• pp.121-129
• /
• 2005

Food neophobia, unwillingness to try novel foods, is a personality trait that can influence children's food preferences and consequently their food acceptance and consumption. The purpose of this study was to determine whether children with food neophobia have poor dietary and growth outcomes compared to non-neophobic children. Subjects were 332 primary school children from 6 randomly selected schools in the district of Hulu Selangor, Selangor. Parents and children were interviewed to obtain demographic, socio-economic, food neophobia and dietary intake information. The children were also measured for weights and heights. One-way ANOVA and Chi-square procedures were utilized for statistical data analysis. Children with food neophobia had higher intakes of energy and most nutrients than average and neophilic children. However, only the mean intakes of protein (p < 0.05) , fat (p < 0.05), vitamin A (p < 0.01) and iron (p < 0.01) were significantly higher in neophobic than average or neophilic children. Compared to neophilic and average groups, a higher percentage of neophobic children met 2/3 of the RNIs for energy $(85.2\%)$, protein $(98.4\%)$ and vitamin A $(72.1\%)$. Mean percentage of carbohydrate energy was lowest$(54.8\pm6.6\%)$ while fat energy $(31.8\pm6.2\%)$ was highest among neophobic children. Neophobic group had the lowest percentage of children $(49.2\%)$ with carbohydrate energy > $55\%$ but highest percentage $(50.8\%)$ with fat energy > $30\%$. For the three study groups, the mean number of servings for all food groups, except grain and cereal, did not meet the Food Pyramid recommendations. Neophobic children consumed significantly more numbers of servings from the meat group than average and neophilic groups (p < 0.01). All study groups had relatively low mean dietary diversity scores but neophobic children had the lowest score $(0.67\pm0.73)$ compared to the average $(0.97\pm0.72)$ and neophilic $(1.98\pm0.81)$ groups. Significant difference in mean dietary diversity scores were only observed between neophobic and neophilic children (p<0.05). Higher percentages of neo-phobic children had low weight-for-height and were at-risk of overweight(p < 0.05). Nutrition practitioners need to understand children's food preferences in their efforts to promote healthful diets for children. To improve children's eating behaviors, parents may need the guidance and support from nutritionists and dietitians that are specific to their needs and their child's situation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.1
• /
• pp.104-111
• /
• 1997

Since seeds of Italian ryegrass should be imported every year, it is necessary to investigate the prossible production of seeds in Italian ryegrass field after rice. Seven Italian ryegrass varieties were planted on October 8, 1986 at National Honam Crop Experiment Station at Iksan and clippings were made on April 10 and April 30 in 1987. Headings of K-11 and T.N.T were earlier than those of Tetrone and Bettina. For all varieties tested, heading date was delayed and 1,000 grain weight was decreased linearly as the clipping was made later. Length, width and thickness of a grain were reduced by clipping and later clipping, while tetraploid varieties produced larger grains than diploid varieties. The germination percentage and germination speed at $25^{\circ}C$ were higher than at 15$^{\circ}C$. The final germination percentage was lower at the later clippings and was higher at 15$^{\circ}C$, and earlier varieties showed higher germination percentage. Uniformity of germination was greater at $25^{\circ}C$ and was decreased as the clipping was made later, and the eariler varieties such as K-11 were germinated more uniformly. Average number of days to germination was longer at 15$^{\circ}C$ than at $25^{\circ}C$ and was longer at later clipping. The germination percentage was decreased linearly as the heading was delayed, while it increased linearly as the 1,000 grain weight was increased.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.2
• /
• pp.141-150
• /
• 2008

The response of grain yield(GY) and milled-rice protein content(PC) to crop growth status and nitrogen(N) rates at panicle initiation stage(PIS) is critical information for prescribing topdress N rate at PIS(Npi) for target GY and PC. Three split-split-plot experiments including various N treatments and rice cultivars were conducted in Experimental Farm, Seoul National University, Korea in 2003-2005. Shoot N density(SND, g N in shoot $m^{-2}$) and canopy reflectance were measured before N application at PIS, and GY, PC, and SND were measured at harvest. Data from the first two years(2003-2004) were used for calibrating the predictive models for GY, PC, and SND accumulated from PIS to harvest using SND at PIS and Npi by multiple stepwise regression. After that the calibrated models were used for calculating N requirement at PIS for each of nine plots based on the target PC of 6.8% and the values of SND at PIS that was estimated by canopy reflectance method in the 2005 experiment. The result showed that SND at PIS in combination with Npi were successful to predict GY, PC, and SND from PIS to harvest in the calibration dataset with the coefficients of determination ($R^2$) of 0.87, 0.73, and 0.82 and the relative errors in prediction(REP, %) of 5.5, 4.3, and 21.1%, respectively. In general, the calibrated model equations showed a little lower performance in calculating GY, PC, and SND in the validation dataset(data from 2005) but REP ranging from 3.3% for PC and 13.9% for SND accumulated from PIS to harvest was acceptable. Nitrogen rate prescription treatment(PRT) for the target PC of 6.8% reduced the coefficient of variation in PC from 4.6% in the fixed rate treatment(FRT, 3.6g N $m^{-2}$) to 2.4% in PRT and the average PC of PRT was 6.78%, being very close to the target PC of 6.8%. In addition, PRT increased GY by 42.1 $gm^{-2}$ while Npi increased by 0.63 $gm^{-2}$ compared to the FRT, resulting in high agronomic N-use efficiency of 68.8 kg grain from additional kg N. The high agronomic N-use efficiency might have resulted from the higher response of grain yield to the applied N in the prescribed N rate treatment because N rate was prescribed based on the crop growth and N status of each plot.

• Journal of Animal Science and Technology
• /
• v.62 no.4
• /
• pp.485-494
• /
• 2020

Limiting amino acids (AAs) for milk production in dairy cows fed on a concentrate diet of corn grain and soybean meal was evaluated in this study. Four lactating and multiparous Holstein cows (in third or fourth parities, with an average body weight of 633 ± 49.2 kg), 8 to 9 weeks into their lactation period, were used in a 4 × 4 Latin square design. The experiment comprised four dietary treatments: (1) no intravenous infusion (control); (2) control plus intravenous infusion of an AA mixture of 6 g/d methionine, 19.1 g/d lysine, 13.8 g/d isoleucine, and 15.4 g/d valine (4AA); (3) control plus intravenous infusion of the AA mixture without methionine (no-Met); and (4) control plus intravenous infusion of the AA mixture without lysine (no-Lys). All animals were fed on a controlled diet (1 kg/d alfalfa hay, 10 kg/d silage, 14 kg/d concentrate mixture, ad libitum timothy hay). The AA composition of the diet and blood were determined using an automatic AA analyzer. Milk composition (protein, fat, lactose, urea nitrogen, and somatic cell counts) was determined using a MilkoScan. The results showed that feed intake for milk production did not differ from that of intravenous infusion using a limiting AA mixture. The 4AA treatment numerically had the highest milk yield (32.4 kg/d), although there was no difference when compared with the control (31.2 kg/d), no-Met (31.3 kg/d), and no-Lys (31.7 kg/d) treatments. The concentration of AAs in blood plasma of cows in all treatments, mainly isoleucine and valine, increased significantly compared with that of control. The no-Met treatment increased (p < 0.05) the concentration of lysine in the blood relative to the control and no-Lys treatments, whereas the no-Lys treatment increased (p < 0.05) the concentration of methionine relative to the control and no-Met treatments. In conclusion, milk production increased when feeding 10 g/d methionine to the cows, together with their concentrate diet of corn grain and soybean meal.

• Korean Journal of Weed Science
• /
• v.31 no.2
• /
• pp.160-166
• /
• 2011

The purposes of this study were to analyze the weediness potential associated with 'Vitamin A enforced rice' and to evaluate the relationships between growth characteristics and environmental adaption related to survival ability in the natural environment. 'Vitamin A enforced rice', 'Nagdong', donor variety of 'Vitamin A enforced rice' and three other varieties were used for this study. The 'Vitamin A enforced rice' was experimented according to ratio of ripened grain, shattering of grain, germination traits, germination ratio of low temperature, emergence ratio after wintering, ratio of viviparity, and growth ratio after ratooning ability. 'Vitamin A enforced rice' was not significant between 'Nagdong' and other varieties in seven characters. Germination ratio was similar of Vitamin A enforced rice' and 'Nagdong', but average germination ability of was different at low temperature. Also, shattering of grain and germination ratio of alternating temperature were significant between 'Nagdong' and other varieties. These results suggested that the relationships between growth characteristics and environmental adaption in 'Vitamin A enforced rice' could be applied to the stability of weediness potential and biosafety guide in GM rice.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.3
• /
• pp.27-41
• /
• 2017

This study dealt with the characteristics and the interrelations of hydrogeological parameters such as hydraulic conductivity, dispersivity and effective porosity of unconsolidated sediments for providing the basic data necessary for the planning of the management and preservation of groundwater quality in the Nakdong River Delta of Busan City, Korea. Groundwater quality in this area has been deteriorated due to seawater intrusion, agricultural fertilizer and pesticide, industrial wastewater, and contaminated river water. The physical properties (grain size distribution, sediment type, sorting) and aquifer parameters (hydraulic conductivity, effective porosity, longitudinal dispersivity) were determined from grain size analysis, laboratory permeability test and column tracer test. Among 36 samples, there were 18 Sand (S), 7 Gravelly Sand (gS), 5 Silty Sand (zS), 5 Muddy Sand (mS), and 1 Sandy Silt (sZ). Hydraulic conductivity was determined through a falling head test, and ranged from $9.2{\times}10^{-5}$ to $2.9{\times}10^{-2}cm/sec$ (0.08 to 25.6 m/day). From breakthrough curves, dispersivity was calculated to be 0.35~3.92 cm. Also, effective porosity and average linear velocity were obtained through the column tracer test, and their values were 0.04~0.46 and 1.06E-04~6.49E-02 cm/sec, respectively. Statistical methods were used to understand the interrelations among aquifer parameters of hydraulic conductivity, effective porosity and dispersivity. The relation between dispersivity and hydraulic conductivity or effective porosity considered the sample length, because dispersivity was affected by experimental scale. The relations between dispersivity and hydraulic conductivity or effective porosity were all in inverse proportion for all long and short samples. The reason was because dispersivity was in inverse proportion to the groundwater velocity in case of steady hydrodynamic dispersion coefficient, and groundwater velocity was in proportion to the hydraulic conductivity or effective porosity. This study also elucidated that longitudinal dispersivity was dependent on the scale of column tracer test, and all hydrogeological parameters were low to high values due to the sand quantity of sediments. It is expected that the hydrogeological parameter data of sediments will be very useful for the planning of groundwater management and preservation in the Nakdong River Delta of Busan City, Korea.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.33-38
• /
• 2009

The effect of ${Y_2}{O_3}$ as a sintering additive on thermal conductivity and microstructure of pressureless sintered AIN ceramics was investigated at sintering temperature range from 1,700 to $1,900^{\circ}C$. ${Y_2}{O_3}$ added AIN specimens showed higher densification rate than pure AIN because of the formation of the yttrium aluminates secondary phase by reaction of ${Y_2}{O_3}$ and ${Al_2}{O_3}$ of AIN surface. The thermal conductivity of AIN specimens was promoted by the addition of ${Y_2}{O_3}$ in spite of the formation of secondary phase in AIN gram boundaries and grain boundary triple junction, because ${Y_2}{O_3}$ addition could reduced the oxygen contents in AIN lattice which is primary factor of thermal conductivity. The them1al conductivity of AIN specimens was promoted by increasing sintering time because the increases of average grain size and the elimination of secondary phases from the grain boundary due to the evaporation. Particularly. the thermal conductivity of AIN specimen sintered at $1,900^{\circ}C$ for 5 hours improved over 20 %. $141\;Wm^{-1}K^{-1}$, compared with the specimen sintered at $1,900^{\circ}C$ for 1 hour.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.290-290
• /
• 2017

Rice (Oryza sativa L.) is one of the most consumed staple food crop which is energy source as carbohydrate and also is considered as the important antioxidant sources including various phenolic compounds. According to the increasing demand of healthy life, the concern to antioxidant also is increasing because of its health-promoting effect. Phenolic compounds are one of the plant secondary metabolites class, which shows various benefits to preventing or treating chronic diseases. In this study, we have measured the total phenol content from total 647 rice samples using the Floin-Ciocalteau method, and then were selected 30 rice genetic resources classified with high, middle, and low group on the basis of total phenol content. The average of the total phenol content of each group was high-group ($6892.9{\pm}488.5{\mu}g\;GAE/g$) > middle-group ($1428.1{\pm}76.0{\mu}g\;GAE/g$) > low-group ($97.6{\pm}11.4{\mu}g\;GAE/g$). The selected rice samples were analyzed with LC-MS/MS to find the composition and concentration of individual phenolic in rice grain. High-group and middle-group contained large amounts of protocatechuic acid and (+)-catechin whereas low-group showed limited amount. Among high-group samples, rice samples with black pericarp color (IT 174089, IT 220079, and IT 259958) had high content of peonidin-3-O-glucoside. Further, these black rice samples were special since polydatin, rarely found stilbenoid in rice grain, was detected. Overall, both the sum of phenolic acid and the sum of flavonoid were high-group > middle-group > low-group. Also, each group exhibited different phenolic compositions; high-group consisted of flavonoid more than phenolic acid, middle-group and low-group was comprised of phenolic acid rather than flavonoid, and non-pigmented rice was composed by fully phenolic acid. The total phenol content had positive relationships with the sum of phenolic compound (r = 0.64), the sum of flavonoid (r = 0.74) at the significance level of p < 0.0001. In addition, protocatechuic acid and quercetin showed positive correlation with above phenolic composition parameters; in order, r = 0.98, 0.65 for protocatechuic acid and r = 0.73, 0.78 for quercetin (p < 0.0001). In conclusion, the total phenol content assay showed the possibility of utilization as a phenolic composition indicator in rice grain. Also, this result was suggested study pigment on other material.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.460-473
• /
• 2017

In order to certificate the contamination assessment of heavy metals in surface sediments from the Nakdong river. Surface sediments were collected of 24 sampling sites (main 14st., tributary 10st.) and analyzed for grain size heavy metals contents. Study area mainly composed of sand (avg. 94.1%) and mean grain size was $1.46{\Phi}$ on average. Heavy metals contents (avg. Al: 12.5%, Zn; 74.4, Cr: 45.3, Li: 26.0, Pb: 17.1, Ni: 10.5, Cu: 7.8, Cd: 0.22 mg/kg) were relatively high contents in the composed of fine sediments. In addition, the results of pearson's correlation coefficient showed that most heavy metals and grain size (silt and clay) were highly correlated. The contents of Zn (6st.) and Ni (1st.) evaluated as moderately polluted, Zn (6st.) evaluated as LEL when compared with sediment quality standard of USEPA and Ontario sediment quality guidelines. Most heavy metals contents were I levels that dose not affected the benthos when compared with sediment pollution evaluation standard of NIER. The results of EX, EF, Igeo and CF showed the contents of Zn, Pb and Cd exceed the background contents and distributing of anthropogenic pollution and evaluated as moderately polluted level. And Nm-08 were relatively high level of contamination in the study area. However as results of PLI (less than 1), all sampling sites were evaluated unpolluted level.