• Korean Journal of Agricultural Science
• /
• v.12 no.1
• /
• pp.47-54
• /
• 1985

An investigation was made to find regional differences and seed characteristics of buckwheats collected from 36 areas in Chungnam province in 1984, and the results obtained are summarized as follows; 1. Grain types of the collected buckwheats were classified as winged, semi-winged and common types. All collections were on the average composed of 50.1 % of common grain types, 26.8 % of semi-winged type and 23.1 % of winged types, respectively. However, there was a great regional difference in components of each grain type among collections. 2. The mean 1000 grain weight was 24.9 gr. The regional differences in 1000 grain weight showed that a collection (collection no. 30) from Susan was 17.4 gr and a collection (collection. no. 16) from Suchon was 31.9 gr. There wasn't any significant relationship between grain types component and 1000 grain weight. 3. Germination of seeds was accelerated as temperature goes up from $5^{\circ}C$ to $30^{\circ}C$. However, interesting germination pattern was observed. That is, seeds from Suchon (collection no. 16), Hongsung (collection no. 23), Cheonweon(collection no. 35), and Yesan (collection no. 27) showed abrupt decrease of germination rate at the temperature of $15^{\circ}C$. The seeds collected from Suchon (collection no. 29), Dangjin (collection no. 32) and from Chungyang (collection no. 21) showed decrease of germination rate at $25^{\circ}C$. These seeds showed, however, the increase of germination percentage at temperature higher than $15^{\circ}C$ and $25^{\circ}C$, respectively. The germination rate for the most collections at $5^{\circ}C$ was less than 10%. However, seeds from Asan (collection no. 33) and Daeduk (collection no. 3) showed 20% and 30% of germination rate at $5^{\circ}C$, respectively. 4. Color of seed coat could be classified into two maj or colors, dark and dark brown. Based on the seed coat color and grain types, all the collections could be classified into the following six categories: winged-black, semi-winged-black, common-black, winged-dark brown, semi-winged dark brown and common-dark brown. The different light absorption rate was found within the UV light zone (190-390 nm) depending upon the two different major seed coat color.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.95-99
• /
• 2001

Soybean [Glycine max (L.) Merr.) is known to produce the highest total digestible mutrients (TDN) yield among summer grain legumes in Jeju area but little is known about the effects of cultural practices on forage yield and quality. A determinate soybean cv. Baegunkong was planted on 5 June, 20 June, and 3 July and grown at four plant densities (30, 50, 70 and 90 plants $m^{-2}$ in 1998 in Jeju to evaluate the effects of planting date and plant density on the yield and quality of soybean forage. Days to flowering decreased from 47 to 38 days, average plant height from 61 to 51cm and main stem diameter from 6.31 to 5.00mm as planting was delayed from 5 June to 3 July. Average plant height quadratically increased from 45 to 62cm as plant density increased from 30 to 90 plants $m^{-2}$. Planting date did not affect the average dry matter, crude protein, and TDN yields. The average dry matter and TDN yields displayed a quadratic response to plant density and the optimum plant density for both dry matter and TDN yields was estimated about 60 plants $m^{-2}$. Plant density had no effect on crude protein yield. Planting date did not significantly influence forage quality. The crude protein content was not significantly influenced by plant density. Increasing plant density slightly increased acid detergent fiber content but slightly decreased TDN content.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.5
• /
• pp.238-242
• /
• 2010

In the present work, the influence of oxide on the Cr-Si-N coatings was investigated for the Cr-Si-O-N coatings on AISI 304 and Si wafer deposited by hybrid system, which combines the DC magnetron sputtering technique and arc ion plating (AIP) using Cr and Si target in an $Ar/N_2/O_2$ gaseous mixture. As the O content in the Cr-Si-N coatings increased, the diffraction patterns of the Cr-Si-O-N coatings showed CrN and $Cr_2O_3$ phases. However, as the O content increased to 28.8 at.%, diffraction peak of $Cr_2O_3$ was disappeared in the Cr-Si-O-N coating. The $d_{200}$ value was decreased with increasing of O content. The average grain size increased from about 40 nm to 65 nm as the O content increased. The maximum micro-hardness of the Cr-Si-O-N coating was obtained 4507 Hk at the O content of 24.8 at.%. The average friction coefficient of the Cr-Si-O-N coatings was gradually decreased by increasing the O content and the average friction coefficient decreased from 0.37 to 0.25 by increasing the O content. These results indicated that amorphous phase was increased in the Cr-Si-O-N coatings by increasing of O content.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.558-564
• /
• 1999

A series of experiments were conducted to determine the effects of standard (ST), long-term (LT), and expander (EX) conditioners on nutritional value of phase-three nursery and finishing swine diets. In Exp. 1, 180 pigs (average initial BW of 11.7 kg) were fed com-soybean meal based diets (1.3% lysine) during a 28 d growth assay. Gain/feed was improved (p<0.004) with pelleting and pellet durability index (PDI) increased with degree of conditioning (LT>ST). However, there was no advantage for LT vs ST conditioning in rate or efficiency of gain (p>0.5). In Exp. 2, 180 pigs (average initial BW of 10.4 kg) were fed con-soybean meal based diets (0.9% lysine) during a 28 d growth assay, Pelleted diets tended to support greater ADG (p<0.08) and gain/feed (p<0.002) with no marked advantage from EX vs ST conditioning. In Exp 3, a total of 70 barrows (average initial BW of 54 kg) was used in a growth assay to determine the effects of feeding a com-soybean meal based diet processed with a standard (ST) steam conditioner, a long-term (LT) steam conditioner, and an expander (EX) conditioner. The conditioned diets were fed as mash (M) or pellets (P) to give a $2{\times}3$ factorial plus a meal control. PDI increased with degree of conditioning (EX>LT>ST). There was a trend (p<0.07) for greater ADG in pigs fed diets that had been thermally conditioned. Also, there was a general advantage in gain/feed with pelleting (p<0.04), but this advantage was pronounced only with standard conditioning. Indeed, the greatest gain/feed was observed for pigs fed the expander treatments (p<0.03) and the expander mash was used as efficiently as the expander pellets. There was no difference in backfat thickness among pigs fed the treatments (p>0.3). but the more extreme the processing technique. the greater the incidence and severity of stomach lesions (p<0.04). These results suggest maximum rate and efficiency of growth with pelleting after standard steam conditioning or simply feeding an expanded mash.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.109-111
• /
• 1978

Three kinds of domestic summer grains, barley, naked-barley & wheat were used for the assessment of ash, protein, fat, crude fiber, calcium, iron & thiamine contents in the grain-pearling and flour-milling processes at the 60%, 70%, 80%, 90% yield bases and the following results were obtained. 1) Ash, protein, fat, crude fiber, calcium, iron & thiamine contents of milled grains were proportional to the milling yield in grain-pearling and flour-milling processes. 2) In the case of pearled barley, the average content of ash was 0.83%, protein was 1.31%, fat was 0.40%, crude fiber was 0.75%, calcium was 3.03mg%, iron was 2.40mg% and thiamine was 0.14% lower than the barley flour at the same level of milling yield. 3) In the case of pearled naked-barley, the average content of ash was 0.41%, protein was 1.96%, fat was is 0.33%, crude fiber was 0.84%, calcium was 4.54mg%, iron was 1.19mg% and thiamine was 0.10mg% lower than the naked-barley flour at the same level of milling yield. 4) In the case of pearled wheat, the average content of ash was 0.28%, protein was 2.25%, fat was 0.05%, crude fiber was 0.25%, calcium was 4.31mg%, iron was 0.12mg% and thiamine was 0.15mg% higher than the wheat flour at the same level of milling yield.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.322-328
• /
• 2019

The purpose of this study was to provide basic data for maintenance and repair of the forest road surfaces using the light drop weight test (LDWT), density test, and grain size analysis at four sites in Yeongyang-gun Mt. (2011y, 2014y, 2016y, and 2017y). In terms of the density test results, the opening density in 2011 was the highest at $2.0694g/cm^3$, and the opening density in 2017 was the lowest at $1.7443g/cm^3$. The grain size analysis showed that the proportion of large aggregates was highest at the opening in 2017, and the proportion of large aggregates decreased with the delay of opening date. From the LDWT results, $E_{vd}$ (the dynamic deformation coefficient) of the 2011y forest road was $35.7MN/m^2$, 2014y was $30.5MN/m^2$, 2016y was $28.6MN/m^2$, and 2017y was $23.5MN/m^2$. The $E_{vd}$ value for the oldest forests opened with the 2011y forest road was the highest, the average $E_{vd}$ value of the center portion was $21.45MN/m^2$, the average $E_{vd}$ value of the wheel portion of the banking part was $31.31MN/m^2$, and the average $E_{vd}$ value of the wheel portion of the cut part was $36.71MN/m^2$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.207-214
• /
• 1996

This study was conducted to obtain fundamental information on forage sorghum breeding in forage crop field of Livestock Experiment Station at Suwon from 1986 to 1991. The charcterization of sorghum germplasm was performed through 1986 to 1987, and after parental lines were selected from diverse sorghum germplasm on the basis of flowering date, plant height and several morphological characters for forage sorghum Fl hybrids. The range of variation of 50% flowering date and plant height were greater in order of forage sorghum sudangrass and male sterile line of grain sorghum. The average flowering date was earlier in sudangrass and male sterile line of grain sorghum than forage sorghum lines from the tested sorghum germplasms. And the average plant height was tall in order of forage sorghum, sudangrass and male sterile lines of grain sorghum. There were remarkable morphological variations between sudangrass lines and male sterile lines of grain sorghum such as plant color, leaf midrib color, glume color, seed coat color, head compactness and shape, awns, grain covering and 100 seed weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.1
• /
• pp.83-109
• /
• 1977

Isogenic lines for glabrous leaf (gl), hull color(gh) and glutinous endosperm (wx) were used to clarify the effects of the gl, gh and wx gene on the grain yield and yield components in rice plant. Eight genotypes: glgl ghgh wxwx, glgl ghgh WxWx, glgl GH-wxwx, glgl GH-WxWx, GL-ghgh wxwx, GL-ghgh WxWx, GL-GH-wxwx and GL-GH-WxWx were evalutated in the backcrossed $F_2$ generation. Significant effects were measured for gl genotypes on heading date, gh genotypes on grain fertility, and wxwx genotypes on number of panicles per hill and 1, 000 grain weight. The grain yield of straw hull and non glutinous lines were higher than gold hull and glutinous lines. The interaction of three genes, gl, gh and wx was significant for heading date, but not significant in other characters. The average value of isogenic lines which were combined with two recessive genes and one dominant gene were lower and the C.V. value was higher than the isogenic lines which were combined with two dominant genes and one recessive gene in all characters except plant height and number of grains per plant. The average value of isogenic line combined with three recessive genes was lower and the C.V. was higher than the isogenic line combined three dominant genes in all characters measured.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.336-346
• /
• 2013

Amaranth (Amaranthus sp. L.) is an important group of plants that includes grain, vegetable, and ornamental types. Centers of diversity for Amaranths are Central and South America, India, and South East Asia, with secondary centers of diversity in West and East Africa. The present study was performed to determine the genetic diversity and population structure of 75 amaranth accessions: 65 from South America and 10 from South Asia as controls using 14 SSR markers. Ninety-nine alleles were detected at an average of seven alleles per SSR locus. Model-based structure analysis revealed the presence of two subpopulations and 3 admixtures, which was consistent with clustering based on the genetic distance. The average major allele frequency and polymorphic information content (PIC) were 0.42 and 0.39, respectively. According to the model-based structure analysis based on genetic distance, 75 accessions (96%) were classified into two clusters, and only three accessions (4%) were admixtures. Cluster 1 had a higher allele number and PIC values than Cluster 2. Model-based structure analysis revealed the presence of two subpopulations and three admixtures in the 75 accessions. The results of this study provide effective information for future germplasm conservation and improvement programs in Amaranthus.

• Tunnel and Underground Space
• /
• v.20 no.3
• /
• pp.217-224
• /
• 2010

Three relatively homogeneous granitic rocks were studied to investigate the relationship between their microstructural properties and fracture toughness. Fracture toughness and ultrasonic velocity were varied with the orientation of mineral's long axis and microcrack, obtained from optical microscope. The lowest fracture toughness values are obtained, when the fracture propagates parallel to weakness planes which have the orientation of mineral's long axis and microcrack, in other words, when weakness planes develop perpendicular to the direction of tensile stress agrees with that of rift plane. The fracture toughness values, measured with the short rod method, varied from 1.63 to 2.62 MPa $m^{0.5}$, and their values are related with the average grain size and average microcrack length.