• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.227-232
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) of moisture contents to 16.7%(w.b), by prototype dryer and the average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to a conventional natural air dryer in which grains were not mixed during drying periods. The dryer performance evaluation index was 738.3kJ/(kg.water), which was more effective than that of grain circulation type hot air dryer(3,500∼5,000 kJ/kg.water)

• 한국재료학회지
• /
• 제21권7호
• /
• pp.410-414
• /
• 2011

This study was carried out to evaluate the microstructures and mechanical properties of a friction stir welded Ni based alloy. Inconel 600 (single phase type) alloy was selected as an experimental material. For this material, friction stir welding (FSW) was performed at a constant tool rotation speed of 400 rpm and a welding speed of 150~200 mm/min by a FSW machine, and argon shielding gas was utilized to prevent surface oxidation of the weld material. At all conditions, sound friction stir welds without any weld defects were obtained. The electron back-scattered diffraction (EBSD) method was used to analyze the grain boundary character distributions (GBCDs) of the welds. As a result, dynamic recrystallization was observed at all conditions. In addition, grain refinement was achieved in the stir zone, gradually accelerating from 19 ${\mu}m$ in average grain size of the base material to 5.5 ${\mu}m$ (150 mm/min) and 4.1 ${\mu}m$ (200 mm/min) in the stir zone with increasing welding speed. Grain refinement also led to enhancement of the mechanical properties: the 200 mm/min friction stir welded zone showed 25% higher microhardness and 15% higher tensile strength relative to the base material.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.181-185
• /
• 2022

In this study, phase-pure titanium dioxide TiO₂ ceramics are sintered using standard high-temperature solid-state reaction technique at different temperatures (1,000, 1,100, 1,200, 1,300, 1,400 ℃). The effect of sintering temperature on the densification and impedance properties of TiO₂ ceramics is investigated. The bulk density and average grain size increase with the increase of sintering temperature. Impedance spectroscopy analysis (complex impedance Z^* and complex modulus M^*), performed in a broad frequency range from 100 Hz to 10 MHz, indicates that the TiO₂ ceramics are dielectrically heterogeneous, consisting of grains and grain boundaries. The complex impedance Z^* -plane indicates the resistance of grains of the TiO₂ ceramics increases with increasing sintering temperature, while that of grain boundaries develops in the opposing direction. The complex modulus M^*-plane shows a grain capacitance that seems to be independent of the sintering temperature, while that of the grain boundaries decreases with increasing sintering temperature. These results suggest that different sintering temperatures have effects on the microstructure, leading to changes in the impedance properties of TiO₂ ceramics.

• 한국수산과학회지
• /
• 제29권5호
• /
• pp.663-676
• /
• 1996

한국 남동해역의 사질퇴적물의 물리적 성질 분포는 수심과 해류의 영향이 큰 것으로 나타났다. 수심 80m를 전후하여 잔류퇴적물인 muddy sand가 분포하고 모래함량은 $60\%$ 이상이며 수직적인 조직 및 물성변화는 별로 크지 않다. 표층퇴적물의 수평분포의 경우 평균입도는 한반도 동남해역과 대마도 중간선에서 가장 조립질로 나타나며 이와 완전히 일치하지는 않지만 전밀도의 경우도 중앙부가 높게 ($1.80g/cm^3$ 이상) 분포한다. 공극율과 함수율의 경우는 전밀도의 분포와 반대로 대한해협의 중심부 부근이 낮고 한반도나 대마도 쪽이 높은데 이는 평균입도 분포에서도 볼 수 있듯이 세립질 퇴적물 성분의 증가와 연관되어 있다. 또한 대마해류의 주 통로를 중심으로 북서-남동 방향으로 증가하는 양상이 뚜렷하게 관찰된다.

• 한국작물학회지
• /
• 제44권1호
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.673-680
• /
• 2000

The effect of excess PbO(0, 1, 2, 4, and 8 mol%) on grain growth and densification of (65)Pb(Mg1/3Nb2/3)O3-(35)PbTiO3 [mol%] ceramics has been investigaetd. With increasing the amount of excess PbO and sintering time, densities of sintered samples decreased gradually. The samples containing less than 1 mol% of PbO showed normal grain growth behavior, however abnormal grain growth was observed to occur in the samples with more than 2 mol% of PbO. In the samples with more than 2 mol% of PbO, the number of abnormal grains decreased and thus the average grain size became smaller with increasing the amount of excess PbO. These results demonstrated that the abnormal grain growth started to occur when a critical amount of excess PbO was added to a (65)Pb(Mg1/3Nb2/3)O3-(35)PbTiO3 sample. Since PMN-PT grains in a liquid matrix were angular, the observed abnormal grain growth was explained to proceed through the two dimensional nucleation process.

• 한국작물학회지
• /
• 제51권4호
• /
• pp.335-339
• /
• 2006

The level of ${\beta}-glucan$ which is a major soluble dietary fiber found in the grain endosperm cell wall was highly variable among 25 barley genotypes grown at four locations including Suwon, Naju, Jinju, and Jeju. Statistically significant genotypic effects were observed for ${\beta}-glucan$ content at each or across growing sites (P<0.001). On average, 'Chalssalbori' showed the lowest percentage ${\beta}-glucan$ (4.04%) among genotypes in the grain, whereas 'Yonezawa Mochi' was highest in percentage ${\beta}-glucan$ (6.46%) compared to other genotypes. The significant difference between genotypes was approximately 1-2% across environments. The effects of location or interaction between locations and genotypes were not significant on the variation of ${\beta}-glucan$ contents. High ${\beta}-glucan$ content seemed to be greatly associated with such grain traits as waxiness and presence of husk except for 'Chalssalbori'. The waxy genotypes had a mean of 5.37% and values ranging from 5.28 to 5.47%, but normal genotypes had a mean of 4.78% and values ranging from 4.69 to 4.88% over environments. Hulless barley genotypes were also higher than hulled barley genotypes for the average ${\beta}-glucan$ content in both individual and over all environments. The difference between the hulled and hulless gene pools was on average of 0.37% with ranges from 0.19% to 0.56% at four environments. ${\beta}-glucan$ content measured from a mapping population of $F_5$-derived 107 lines derived from the cross between 'Yonezawa Mochi' and 'Neulssalbori' was not significantly associated with other agronomic traits except for 1,000-kernel weight at the '01 Suwon environment. Not too much information on the relationship of ${\beta}-glucan$ content to agronomic traits was available.

• 한국지형학회지
• /
• 제25권1호
• /
• pp.1-17
• /
• 2018

The characteristics and burial ages of sand sediments on the Jiduri coast in Daechung-myeon, Ongjin-gun, Incheon were investigated. Daecheong Island is the area where the characteristics of the rocky coast and sand coast are shown. Various studies have been conducted on the Okjukdong sand dune that appears in the north of the island. However, there has been no study on the sandy sedimentary topography of the Jiduri and Moraewul area in the south. The sandy sedimentary terrain of Jiduri is divided into sandy beaches, sand dunes and sand deposits along the slope including climbing dune. Overall, the depth of sandy sediments in Jiduri is not deep. The characteristics of sandy sediments and burial ages were investigated at an elevation of about 23 m above sea level at the back of Jiduli Beach and 46 m above sea level at the ridge line between Jiduri and Moraewol. From the Jiduri coast to the hillside behind, the average grain size decreases and the sorting becomes better as it moves from the intertidal zone to the beach and the foredune. This indicates the selective sand transport by the wind and can be judged by the terrain formed under the current sedimentation environment. The average grain size at the upper part of the section of JD-1 (elevation of about 23m MSL) was $1.6918{\varphi}$ of medium sand. The sorting was $0.4584{\varphi}$, skewness was -1.0491 and kurtosis was -1.2411, respectively. Particularly, the average particle size of the crosssection issomewhat uniform, but the color of the constituent material changes from brown to black. In the case of JD-2 (about 46 m MSL), the mean grain size of the section was $1.7943{\varphi}$, the sorting was 0.4931, the skewness was -1.1163, and the kurtosis was 1.2133. On the other hand, the brown and black layers of JD-1 exhibited a burial age of $0.1{\pm}0.0ka$ and the JD-2 had a burial age of $0.7{\pm}0.0ka$.

• 소성∙가공
• /
• 제29권3호
• /
• pp.127-134
• /
• 2020

It is known that the difference of texture of the polycrystalline Al sheet is not a critical parameter for the formation of aligned nanopore arrays in anodic aluminum oxide (AAO). This will be related to the polycrystalline grain in the Al sheet. The texture of each grain in the polycrystalline Al sheet is different. The mixed textures of grains have the mixing effects on the nanopore structure of the AAO. Thus, the effect of Al texture on the nanopore structure of the AAO was investigated using three types of Al single crystals with (111), (200) and (220) textures in this paper. These three types of AAO layers were fabricated by the two-step anodizing method at 40 V and temperature of 0-5℃ in oxalic acid solution. In the nanopores formed on the AAO, the average area of one nanopore and the average roundness of one nanopore were measured were measured based on the SEM images. In the hexagon obtained by connecting nanopores on the AAO, the average standard deviation of one angle deviated from 120° was measured. In the AAO nanopores with texture of (111), (200) and (220) single crystal samples, the average area of one nanopore of (200) single crystal sample was the widest, followed by (111), (220) single crystals. The average circularity of one nanopore of (200) single crystal sample was the best, followed by (111), (220) single crystals. The average standard deviation of an angle from 120° of (220) single crystal sample was the largest, followed by (111) and (200) single crystals.

• 한국작물학회지
• /
• 제37권3호
• /
• pp.244-249
• /
• 1992

벼 품종간 미립 절대밀도의 변이와 그에 영향하는 미립관련형질들을 구명하기 위하여 통일형 30, Japonica형 72 및 Indica형 133 계 235 품종에 대해 미립의 절대밀도와 모양 및 크기, 경도, 심복백, ADV, amylose 함량, 전분구조를 조사하고 그들 간의 관계를 검토한 결과는 다음과 같다. 1. 백미의 절대밀도는 평균적으로 통일형 1.496g/$cm^3$, Japonica형 1.506g/$cm^3$, Indica형 1.500g/$cm^3$이었고, 출수까지의 생육일수 및 현미의 경도와는 정의 상관을 심복백, 현미의 부피 및 1000립중, 입장과는 부의 상관을 보였다. 2. 편회귀분석 결과 미립의 크기가 절대밀도에 가장 크게 영향하는 것으로 나타났다. 3. 절대밀도의 고, 저에 따른 전분결정구조의 차이는 감별할 수 없었으며, 심복백의 경우 정상배유부분에 비해 전분립자가 둥글고 그 결정조직이 느슨하였다. 4. 미립의 크기가 비슷하고 심복백이 없는 경우 절대밀도의 품종간 차이는 미미한 것으로 나타나서 수량성에는 크게 영향하지 못할 것으로 생각되나, 미질의 측면에서는 검토되어져야 할 것이다.