• Journal of Biosystems Engineering
• /
• 제15권2호
• /
• pp.123-133
• /
• 1990

Thermal performance of a solar heating plastic greenhouse designed for a hydroponic system was studied. The system was constructed with the air-water heat exchanger and thermal storage tank that were combined with hydroponic water beds. Experiments were carried out to investigate the daily average heat stored and released in thermal storage tank, average solar energy collection efficiency, average coefficient of performance, average oil reduction factor of thermal storage system, and the heat transfer coefficient during the nighttime in plastic greenhouse. The results obtained in the present study are summarized as follows. 1. Daily average heat stored in thermal storage tank and released from the thermal storage tank was 1,259 and $797KJ/m^2$ day, respectively. 2. The average solar energy collection efficiency of thermal storage tank was 0.125 during the experiment period. And the average coefficient of performance of thermal storage system in plastic greenhouse was 3.6. 3. The average oil reduction factor of thermal storage system and the heat transfer coefficient during the nighttime in plastic greenhouse were found to be 0.52 and $4.3W/m^2\;hr\;^{\circ}C$, respectively.

• 한국물환경학회지
• /
• 제37권4호
• /
• pp.286-295
• /
• 2021

The removal efficiency of road-deposited sediment (SDR) by road sweeping was analyzed by performing particle size analysis before and after road sweeping at four highways during May to December 2019. The SDR accounted for the largest proportion in the range of 250 to 850 ㎛ and the degree of its proportion had an effect on the particle size distribution curve. The particle size distribution of the collected sediments showed a similar distribution at all sites. Below 75 ㎛, the removal efficiency of SDR showed a constant value around 40%, but above 75 ㎛, it increased as the particle size increased. The removal efficiency was 82-90% (average 86%) for gravel, 66-93% (average 79%) for coarse sand, 35-92% (average 64%) for fine sand, 29-69% (average 44%) for very fine sand, 19-58% (average 40%) for silt loading, 10-59% (average 40%) for TSP, 13-57% (average 40%) for PM10, and 15-61% (average 38%) for PM2.5. SDR removal efficiency showed an average of 69% for the four highways. It was found that if the amount of SDR was less than 100 g/m², it was affected by the road surface condition and had a large regional deviation. As such, the amount of SDR and the removal efficiency increased. The fine particles, which have relatively low removal efficiency, contained a large amount of pollutants, which is an important factor in water and air pollution. Therefore, various measures to improve the removal efficiency of fine particles in SDR by road sweeping are needed.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.21-28
• /
• 2017

Improving efficiency of the telecommunication is crucial to the development and growth of Korean economy. Recently, it has become important with the huge development of information technology and its greater potential for extensive impact on the rest of the economy. Hence, it is useful to determine the factors that help enhance efficiency in telecommunication and consider them in improving the evaluation model. This study applies DEA (data envelopment analysis) to evaluate the relative efficiency of 51 branches of a Korean telecommunication company. Using the super-efficiency approach, we tested outliers which may affect the results and ranked the efficient branches. A method of deriving key variables applied to business operation is proposed to identify the key performance indicators for evaluation that takes environmental (non-discretionary) factors into account. We used the extended CCR model proposed by Banker and Morey to investigate the influence of non-discretionary factor. The information provided by the model (slacks, weights) and the sensitivity analysis shows that the most important indicator that affects the branch performance is operating cost. The results of sensitivity analysis show that average efficient score decreases from 0.972 (base case) to 0.863 for CASE2-COST. The average score of the data proves the priority of operating cost over other indicators. The effect of environmental (non-discretionary) variable was found to be significant. The population effect was positive and improved overall efficiency by 0.91% on average. Non-discretionary factor plays a meaningful role explaining the performance of branches. The performance optimization report can help a manager of an inefficient branch to develop branch strategies. Managers can identify the top-performing units, study best practices and adopt the strategy to the organization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.112-115
• /
• 2002

Previous AC/DC PFC Boost Converter perceives feed forward signal of input and feedback signal of output for average current-mode control. Previous Boost Converter, the quantity of input current will be decreased by the decrease of output current in light load, and also power factor comes to be decreased. Also the efficiency of converter will be decreased by the decrease of power factor. The proposed converter presents the good PFC(Power Factor Correction), low line current hormonic distortions and tight output voltage regulations using non-dissipative snubber. The proposed converter also has a high efficiency by non-dissipative snubber circuit. To show the superiority of this converter is verified through the experiment with a 640W, 100kHz prototype converter.

• Communications for Statistical Applications and Methods
• /
• 제8권3호
• /
• pp.661-666
• /
• 2001

In this paper we consider the properties of group divisible designs and triangular designs which belong to linked block designs. These designs have minimum number of experiments among the same average efficiency factor Optimal complete diallel cross designs are constructed by these designs. A list is prepared of all linked block designs in the class of group divisible designs and triangular designs enumerated by Clatworthy(1773).

• 태양에너지
• /
• 제7권1호
• /
• pp.3-13
• /
• 1987

A batch type passive solar water systems, which perform the dual function of absorbing the solar energy and storing the heated water, have been designed and fabricated for the purpose of side-by-side testing at KIER. The test models included an A, B and C type batch systems which were classified according to the design of box and arrangement of tanks. The year-round performance tests show that B type batch system taken the step-wise tank arrangement indicates 55.7% yearly-average collection efficiency factor and 61% yearly-average maximum collection efficiency factor. Computer-aided-experimental results show that the sufficient hot water can be obtained in the early morning if the glazing is supplemented by a reflector/insulation cover. The thermal performance equation has been developed for the prediction of hourly variation of the water temperature in tank.

• 한국전자통신학회논문지
• /
• 제12권5호
• /
• pp.845-850
• /
• 2017

본 논문에서 차량용 양방향 LDC의 효율 개선을 위한 4개의 각기 다른 다양한 방안이 모색되었다. 예를 들어 채널저항의 감소요인을 분석하여 시스템에 최적의 MOSFET을 사용하고, 트랜스포머에서의 효율감소 요인을 찾아 개선하였다. 그 결과 기 개발되었던 85% 가량의 LDC 평균효율을 94.7% 까지 개선시킬 수 있었다.

• International journal of advanced smart convergence
• /
• 제11권2호
• /
• pp.171-184
• /
• 2022

The purpose of this paper is output oriented, in order to maximize the output level of sustainable development efficiency of foreign trade in western China with limited input. This paper adopts the relevant input-output indicators of sustainable foreign trade development of 11 provinces and cities in western China from 2016 to 2020, and uses DEA model to measure their technical efficiency, pure technical efficiency and scale efficiency. Malmquist index was used to calculate the total factor productivity change index of each province in western China from 2016 to 2020. We found that, on the whole, the average values of technical efficiency, pure technical efficiency and scale efficiency of provinces and cities in western China from 2016 to 2020 are greater than 0.8, indicating that the western region has high technical efficiency, relatively high management and institutional level and high existing scale level. Scale efficiency is lower than pure technical efficiency on the whole, indicating that the current sustainable development efficiency of foreign trade in western China is mainly limited by its scale level. The technological progress index is higher than the technological efficiency change index, indicating that the total factor productivity of the sustainable development of foreign trade in western China is mainly driven by technological progress and more influenced by external factors. We think the conclusion of this study can provide important reference information for the sustainable development of foreign trade of provinces and cities in western China.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권2호
• /
• pp.70-78
• /
• 2011

본 논문은 변형률 계측데이터를 사용하는 신뢰성 및 정확성을 증진된 BWIM(Bridge Weigh-In-Motion) 알고리즘을 개발하고, 이를 교량에 대한 다양한 실험을 통해 검증하고자 하는 것이다. 본 논문에서는 밀도추정함수와 평균보정계수를 이용한 BWIM 알고리즘을 제시한다. 밀도추정함수는 다축하중을 추정할 때 신뢰할 수 있게 적용할 수 있음을 입증하였으며, 평균보정계수는 이론 계산된 모멘트와 계측된 변형률에서 계산한 모멘트 사이의 전반적인 오차를 최소화하기 위해 적용된다. 개발된 알고리즘은 수치예제, 실내모형실험 그리고 다주형 합성교량에 대한 현장실험을 통해 성공적으로 검증하였다.