• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.80-85
• /
• 2010

The surfaces of WC-Co and SCM415 were etched to form a micro size protrusion for oil based ultra low friction applications using an ion bombardment process in a filtered vacuum arc plasma. WC-Co species showed that a self-patterned surface was available by the ion bombarding process due to the difference of sputtering yield of WC and Co. And the increasing rate of roughness was 0.6 nm/min at -600 V substrate bias voltage. The increasing rate of roughness of SCM415 species was 1.5 nm/min at -800 V, but the selfpatterning effect as shown in WC-Co was not appeared. When the SCM415 species pretreated by electrical discharge machining is etched, the increasing rate of roughness increased from 1.5 nm/min to 40 nm/min at -800 V substrate bias voltage and the uniform surface treatment was available.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.67-75
• /
• 2007

This study intends to the adequacy inspection of the room temperature variation rate that is available in the building heat performance evaluation index, so we performed the sensitivity analysis about the room temperature variation rate and the energy consumption in the room. For these purpose, we supposed the models which are composed of the various window area, insulation thickness and ventilation rate. Then we analyzed the simulation using the ESP-r and Seoul weather data. In this research, the pattern of the increasing & decreasing rate of annual load according to the change of the various design factors is similar to the pattern of increasing & decreasing rate of not the K-values but the room temperature variation rate. Also we derive the optimum value of the various design factors and the room temperature variation rate in this analysis model. Further study is to be required the development of convenient tool to use in the real design.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.14-21
• /
• 1998

In providing with low speed multimedia services, a call blocking rate is greatly varied according to the transmission rate, and thereofr, the call blocking rate is remarkably increased for a service having a high transmission rate compared to a service having a low transmission rate. This paper presents three methods of solving this problem; Packing Scheme in which available channels distributed to each frequency channel are concentrated on one frequency channel and a call having a high transmission rate is assigned to the frequency channel; Queuing Scheme in which queuing is assigned to calls under service is temporarily reduced and a call having a high transmission rate is allowed. The result of performance analysis for 13 Kbps and 128 Kbps service through computer simulation showed that the call blocking rate for 128 Kbpx service was reduced by tens of percent accoring to loads.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.261-267
• /
• 1999

Pot experiments were conducted to evaluate the phosphorus (P) availability with cropping in soils where P were highly accumulated. Bray 1-P contents of the used three soils were 584, 695 and $1043P\;mg\;kg^{-1}$, respectively. Corn ${\rightarrow}$ Chinese cabbage ${\rightarrow}$ Chinese cabbage ${\rightarrow}$ corn were sequentially grown from 1996 to 1998. P fertilizer was applied at three levels of 0 (P0), recommended application rate (P1), and double of recommended application rate (P2). At the end of each crop growth, available P content was determined by methods of Bray 1-P, Olsen-P and Lancaster-P. The growth of crops were not significantly affected by the rates of P applications. The relative yields of PO treatment were more than 88% of P1 treatment. The recoveries of added phosphorus were relatively low due to the high content of available phosphorus in soils. Although available phosphorus contents decreased through cropping, the concentration of soil available phosphorus was maintained high level even after the final cropping. In the case of P0 treatment in the three soils, the residual concentration was in the range of $410{\sim}610mg\;kg^{-1}$ for Bray 1-P, $284{\sim}410mg\;kg^{-1}$ for Olsen-P and $368{\sim}524mg\;kg^{-1}$ for Lancaster-P. The amount of soil available phosphorus decreased during the experiments was linearly regressed with high significance to the amount of P taken up by crops. The regressions of soil 1 as follow, Bray 1-P : y=149.7x=102.7, Lancaster-P : y=209.2x-140.2, Olsen-P: y=60.8x=19.9. The decrease rate of available phosphorus in the P0 treatment with cropping was described by an equation of first-order chemical reaction. The equation of soil1 was as follow: Bray 1-P: In(C)= -0.12N + 6.96 r=-0.991, Lancaster-P: In(C)= -0.14N = 6.88 r= -0.938, Olsen-P: In(C)= -0.07N = 6.37 r= -0.959. The rate constants seemed to be affected by ply, sand and silt content, and exchangeable $Ca^{2+}$ concentration. The times of cropping needed to reduce the content of available P to half of the initial or to the index level could be predicted by using that equation.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.963-975
• /
• 2017

Improvement of soft clay deposit by preloading with vertical drains is one of the most popular techniques followed worldwide. These drains accelerate the rate of consolidation by shortening the drainage path. Although the analytical and numerical solutions available are mostly based on equal strain hypothesis, the adoption of free strain analysis is more realistic because of the flexible nature of the imposed surcharge loading, especially for the embankment loading used for transport infrastructure. In this paper, a numerical model has been developed based on free strain hypothesis for understanding the behaviour of soft ground improvement by vertical drain with preloading. The unit cell analogy is used and the effect of smear has been incorporated. The model has been validated by comparing with available field test results and thereafter, a hypothetical case study is done using the available field data for soft clay deposit existing in the eastern part of Australia and important conclusions are drawn therefrom.

• Progress in Medical Physics
• /
• v.31 no.2
• /
• pp.9-19
• /
• 2020

Purpose: This study aims to develop a multi-purpose electron beam irradiation device for preclinical research and material testing using the research electron linear accelerator installed at the Dongnam Institute of Radiological and Medical Sciences. Methods: The fabricated irradiation device comprises a dual scattering foil and collimator. The correct scattering foil thickness, in terms of the energy loss and beam profile uniformity, was determined using Monte Carlo calculations. The ion-chamber and radiochromic films were used to determine the reference dose-rate (Gy/s) and beam profiles as functions of the source to surface distance (SSD) and pulse frequency. Results: The dose-rates for the electron beams were evaluated for the range from 59.16 Gy/s to 5.22 cGy/s at SSDs of 40-120 cm, by controlling the pulse frequency. Furthermore, uniform dose distributions in the electron fields were achieved up to approximately 10 cm in diameter. An empirical formula for the systematic dose-rate calculation for the irradiation system was established using the measured data. Conclusions: A wide dose-rate range electron beam irradiation device was successfully developed in this study. The pre-clinical studies relating to FLASH radiotherapy to the conventional level were made available. Additionally, material studies were made available using a quantified irradiation system. Future studies are required to improve the energy, dose-rate, and field uniformity of the irradiation system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.1
• /
• pp.86-92
• /
• 2012

To promote the practical use of livestock manure compost (LC) for paddy rice cultivation, the fertilization efficiency of nutrients in LCs was investigated compared to that of chemical fertilizer. This experiment was conducted at rice field in Hwaseong, Korea, with 6 treatments by each of 3 kinds of tested LCs, cattle manure compost (CaC), swine manure compost (SwC) and chicken manure compost (ChC). The treatments consisted of 3 application levels of LCs and 3 chemical fertilizer treatments having the same application levels with LCs. $NH_4$-N content in soil became higher according to the increase in the urea application rate, while it became lower in LC plots than in urea plots, and statistically had no significant difference among LC plots. There was a close relationship between phosphate fertilization rate and the increment of soil available phosphate content after experiment resulting y = 0.1788x - 6.169 ($R^2=0.9425$) when applied fused superphosphate fertilizer, and y = 0.0662x - 2.689 ($R^2=0.9315$) when applied LC at the equivalent rates to phosphate input (x: phosphate application rate, kg $ha^{-1}$, y: increment in soil available phosphate content, mg $kg^{-1}$). And from these two equations, the correlation on the phosphate application rate between fused superphosphate fertilizer and LC could be obtained as y = 2.7056x - 52.492 (x: $P_2O_5$ application rate of fused superphosphate, kg $ha^{-1}$, y: $P_2O_5$ application rate of LC, kg $ha^{-1}$). Plant height, number of tillers, nutrients uptake by rice, and rice yield showed higher levels in N 100% and N 150% application plots of chemical fertilizers, while every LC plots exhibited lower values and no significant difference among them. Relative nitrogen fertilization efficiencies of LCs compared to urea was 12.3% for CaC, 8.8 for SwC and 24.6 for ChC, respectively.

• Journal of Digital Contents Society
• /
• v.9 no.3
• /
• pp.433-439
• /
• 2008

A moving picture in online game is one of major ways to advertise online games, which gives a lot of help in playing game. In this case, a moving picture is compressed to variable bit rate for efficient storage use and network resource efficiency. Adaptable bandwidth allocation technique builds a transmission plan of a game moving picture. And, then some frames are discarded when transmission rate by the transmission plan is larger than available transmission rate, until transmission rate satisfies available transmission rate. Thus, performance evaluation factors in adaptable bandwidth allocation technique may be dependent on discarding order of a frame which transmission rate is much influenced. In this paper, in order to show the performance, a CBA algorithm, an MCBA algorithm, an MVBA algorithm, [6] and [7] algorithm were applied to a transmission plan in the adaptable band width allocation technique using various frame discard methods and performance evaluation factors were compared in among smoothing algorithms.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2605-2614
• /
• 1997

Recently, we are concerned with effective service according as the demand increase for high speed data service. We can use high speed transfer and multiple traffic service on the ATM networks, so we concentrate on preventive-control method rather than reactive-control one. But it is possible to have low QoS and traffic congestion due to unpredictable traffic and burst traffic. Specially, ATM Forum has discussed to standardization of traffic management of ABR(Available Bit Rate) service. Because ABR traffic controls the flow of traffic using the feedback information and the current status information of cell, it allocates bandwidth systematically and dynamically to the user. In this paper, we propose a new Rate-based flow control scheme which adapted double threshold buffer idea. The double threshold buffer controls the traffic control by establishing two threshold in buffer.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.2
• /
• pp.155-168
• /
• 1984

Field test were conducted to select the best method for soil phosphorus test and to obtain the critical levels of each method for P fertilizer recommendations based on tobacco production. Truog method was recognized to be the mort suitable one for soil P test. N. Carolina, Bray No.1 and Olsen methods were followed in order. Bray No. 2 and Lancaster methods showed the least satisfaction. The critical levels of available P by lancaster, Bray No. 1, N. Carolina,01sen, and Truog methods were 55ppm, 32ppm, 21ppm, 19ppm, and 22ppm, respectively. Below the critical level a large yield response can be expected with 10kg $P_2O_5$/10a, above critical level little or no response is expected. In soils the more the initial available p, the more available P was carried over, while the more the total amount of silt and clay, the less the residual P was found. The increase in residual P by 10kg of $P_2O_5$ was greater than that of 5kg/10a. The chemical composition and the price of the cured leaf were not affected by the $P_2O_5$ application, indicating that the increase in the rate of $P_2O_5$ application would not exert on the quality of tobacco.