• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.292-298
• /
• 2022

Femtocell networks can be a potential method for increasing the capacity of LTE networks, especially in indoor areas. However, unplanned deployment of femtocells results in co-tier interference and cross-tier interference problems. The interference reduces the advantages of implementing femtocell networks to a certain extent. The notion of Fractional Frequency Reuse (FFR) is proposed in order to reduce the impact of interference on the system's performance. In this paper, a dynamic approach for efficiently partitioning the spectrum is suggested. The goal is to enhance the capacity of femtocells, which will improve the performance of the system. The suggested strategy allocates less resources to the macrocell portion of the network, which has a greater number of femtocells deployed to maximize the utilization of available resources for femtocell users. The spectrum division would be dynamic. The proposed strategy is evaluated through a simulation using MATLAB tool. In conclusion, the results showed that the proposed scheme has the potential to boost the system's capacity.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.601-609
• /
• 2013

One of the most serious factors constraining the next generation cellular mobile consumer communication systems will be the severe co-channel interference experienced at the cell edge. Such a capacity-degrading impairment combined with the limited available spectrum resource makes it essential to develop more spectrally efficient solutions to enhance the system performance and enrich the mobile user's application services. This paper proposes a unique hybrid method of frequency hopping (FH) and subcarrier-reuse-partitioning that can maximize the system capacity by efficiently utilizing the available spectrum while at the same time reduce the co-channel interference effect. The main feature of the proposed method is that it applies an optimal combination of different frequency reuse factors (FRF) and FH-subcarrier allocation patterns into the partitioned cell regions. From the simulation results, it is shown that the proposed method can achieve the optimum number of subcarrier subsets according to the frequency-reuse distance and results in better performance than the fixed FRF methods, for a given partitioning arrangement. The results are presented in the context of both blocking probability and BER performances. It will also be shown how the proposed scheme is well suited to FH-OFDMA based cellular systems aiming at low co-channel interference performance and optimized number of subcarriers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.1075-1082
• /
• 1997

In this paper, we propose a channel assignment scheme for reducing call blocking rate in a base station(BS) of DS-CDMA cellular systems. The proposed scheme can e applied to the case where the capacity of reverse radio link is enough, but not are the available traffic channels performing the digital modulation and demodulation functions between a mobile station and the base station. The proposed scheme takes advantage of the feature of soft handoff in which a mobile station keeps its communication link even if one of the two communication links is released. The scheme estimates the mean and variance of the received power level measured at the base station before assigning a traffic channel for a new call request. The BS makes decision based on the estimated balues whether the new call request will be accepted or not. If it is decided that the capacity of reverse radio link is enough, but all traffic channels are not available, then the BS increases the soft handoff parameter T_DROP to release the traffic channels of mobile stations loactedin soft handoff area. The BS assigns the released traffic channel to anew call or a handoff call. The performance of the proposed channel assignment scheme is evaluated by computer simulation. The results show that the call blocking rate for new calls and handoff calls is reduced.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1759-1768
• /
• 2018

The energy density, power density and ohm resistance of battery change significantly as results of battery aging, which lead to decrease in the accuracy of the equivalent model. A parameter identification method of the equivale6nt circuit model with 3 R-C branches based on the test database of battery life cycle is proposed in this paper. This database is built on the basis of experiments such as updating of available capacity, charging and discharging tests at different rates and relaxation characteristics tests. It can realize regular update and calibration of key parameters like SOH, so as to ensure the reliability of parameters identified. Taking SOH, SOC and T as independent variables, lookup table method is adopted to set initial value for the parameter matrix. Meanwhile, in order to ensure the validity of the model, the least square method based on variable forgetting factor is adopted for optimizing to complete the identification of equivalent model parameters. By comparing the simulation data with measured data for charging and discharging experiments of Li-ion battery, the effectiveness of the full life cycle database and the model are verified.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.456-462
• /
• 2011

This paper investigates the outage behavior of peak interference power limited cognitive radio (CR) networks with multiple transmit antennas. In CR-multi-input single-output (MISO) channel, the total transmit power is distributed over the transmitantennas. First, we use the orthogonal space-time codes (STC) to achieve the transmit diversity at CR-receiver (rx) and investigate the effect of the power distribution on the interference power received at the primary-receiver (P-rx). Then, we investigate the transmit antenna selection (TAS) scheme in which the CR system selects the best transmit antenna and allocates all the power to the selected best antenna. Two transmit antenna selection strategies are proposed depending on if feedback channel is available or not. We derive the closed form expressions of outage probability and outage capacity of all schemes with arbitrary number of transmit-antennas. We show that the proposed schemes significantly improve the outage capacity over the single antenna systems in Rayleigh fading environment. We also show that TAS based scheme outperforms the STC based scheme when peak interference power constraint is imposed on the P-rx only if a feedback channel from CR-rx to CR-transmitter is available.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.547-554
• /
• 2010

This study intends to analyze how long the landfill site will be available by estimating maximum volume of landfill. Preestimated volume was calculated using digital maps and scheme drawings. The latest reclamation volume was measured using the state-of-the-art airborne LiDAR technology. Based on these data. landfill volume of now, carries in volume of past a few years and subsidence rate were calculated. As a result of study, the remaining capacity of this landfill site was estimated that it would be available till 2045.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.113-113
• /
• 2019

하천 오염 부하의 양적 증가를 해결하기 위해 환경부는 유역 내 목표 수질을 설정하고 목표 수질한도 내에서 오염물질 배출 총량을 할당하는 수질오염총량제를 도입하였다. 수질오염총량제 시행에 있어 시계열로 발생하는 유출특성을 반영하기 위해 장기유출모형의 적용이 가능한 Hydrologic Simulation Program-Fortran(HSPF)을 수질관리 및 평가 모델로 사용하고 있다. 그러나 HSPF 모델은 실제 다양한 특성을 가진 토양층을 Upper zone과 Lower zone 내에 통합적인 매개변수를 이용하여 유량을 모의하는 문제점이 있다. 이는 토양 내부에서의 유출에 대한 정확한 모의가 이루어지지 않는 결과를 초래할 수 있다. 따라서 본 연구에서는 국내 토양층에 따른 Available Water Capacity(AWC)에 대한 자료를 구축하고 기존보다 세분화된 토양 관련 매개변수 범위를 제시하였다. 본 연구에서 제시한 토양 관련 매개변수 범위를 반영할 경우 수질오염총량제 시행에 있어 HSPF 모델 모의 시 유역 내의 토양도를 고려하여 보다 정확한 중간유출과 기저유출분석이 가능할 것이라 사료된다.

• Structural Engineering and Mechanics
• /
• v.81 no.4
• /
• pp.395-409
• /
• 2022

The presence of infill generally neglected in design despite the fact that infill contribution significantly increase the lateral stiffness and strength of the reinforced concrete frame structure. Several experimental studies and computational models have been proposed to capture the rational response of infill-frame interaction at global level. However, limited studies are available on explicit finite element modelling to study the local behavior due to high computation and convergence issues in numerical modelling. In the current study, the computational modelling of RC frames is done with various configurations of infill masonry in terms of types of blocks, lateral loading and reinforcement detailing employed with material nonlinearities, interface contact issues and bond-slip phenomenon particularly near the beam-column joints. To this end, extensive computational modelling of five variant characteristics test specimens extracted from the detailed experimental program available in literature and process through nonlinear static analysis in FEM code, ATENA generally used to capture the nonlinear response of reinforced concrete structures. Results are presented in terms of damage patterns and capacity curves by employing the finest possible detail provided in the experimental program. Comparative analysis shows that good correlation amongst the experimental and numerical simulated results both in terms of capacity and crack patterns.

• Coupled systems mechanics
• /
• v.12 no.2
• /
• pp.167-181
• /
• 2023

The determination of the blast protection level and the corresponding minimum load-bearing capacity for a laminated glass (LG) window is of crucial importance for safety and security design purposes. In this paper, the focus is given to the window response under near-field blast loading, i.e., where relatively small explosives would be activated close to the target, representative of attack scenarios using small commercial drones. In general, the assessment of the load-bearing capacity of a window is based on complex and expensive experiments, which can be conducted for a small number of configurations. On the other hand, nowadays, validated numerical simulations tools based on the Finite Element Method (FEM) are available to partially substitute the physical tests for the assessment of the performance of various LG systems, especially for the far-field blast loading. However, very little literature is available on the LG window performance under near-field blast loads, which differs from far-field situations in two points: i) the duration of the load is very short, since the blast wavelength tends to increase with the distance and ii) the load distribution is not uniform over the window surface, as opposed to the almost plane wave configuration for far-field configurations. Therefore, the current study focuses on the performance assessment and structural behaviour of LG windows under near-field blasts. Typical behavioural trends are investigated, by taking into account possible relevant damage mechanisms in the LG window components, while size effects for target LG windows are also addressed under a multitude of blast loading configurations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.4
• /
• pp.230-235
• /
• 1993

This study was carried out to investigate the supplying capacity of various forms(Water soluble, exchangeable, and available) of potassium in soils of different site quality by using surface soils from the Japanese cedar(Cryptomeria japonica) forests in Cheju island. Major results can be summerized as follows. Using continuous leaching methods with 0.01N-HCl, accumulated amounts of available potassium from surface soils of site upper and site low were about 0.6me/100g and 0.4me/100g, respectively. The release ratio of available potassium in the first $1{\ell}$ leaching of 0.01N-HCl to the total available potassium leached with $6{\ell}$ of 0.01N-HCl was over 80% for both sites, and this suggester that surface soil of both sites had the weak potassium adsorptivity as the typical volcanic ash soil. The ratio of the exchangeable potassium to the water soluble potassium was 1 : 1 for both sites. The ratio of the exchangeable potassium to the available potassium was 1 : 1 for the site low but the smaller ratio value for the site upper, indicating that the potassium supplying power of the site upper was greater than that of the site low. Available potassium was highly correlated with exchangeable Ca($0.83^{**}$) and Mg($0.84^{**}$).