• Journal of Applied Reliability
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2018

Purpose: Maintaining appropriate operational availability (Ao) is a key element of combat victory, but estimates vary according to estimation methods. The purpose of this study is to improve the accuracy of estimating operational availability by tracing the changes of the weapon system's failure rate, repair rate, and the level of logistic support. Methods: In order to track the change in the operating availability, the MDT (mean down time) is modeled by adding the repair time and the ALDT (administration and logistic delay time) to the service time. Results: Using the field data of the weapon system A operated by the ROKAF, the failure rate follows a non-homogeneous Poisson process that changes with time, and it is modeled considering the changing repair rate and the logistic support time. Conclusion: The accuracy of the analytical results was verified by comparing the actual operating data with the estimated availability. The results of this study can be used to track and evaluate the availability in a realistic situation where the failure rate and maintenance rate continuously change in operating environment.

• Journal of Applied Reliability
• /
• v.8 no.4
• /
• pp.193-204
• /
• 2008

In this paper, we proposed availability evaluation of network in mobile communication network that have hand off structure. Radio mobile communication network is essential hand off action to keep communication that is no discontinuance by transfer of terminal. Part by state and hand off state ago hand off by transfer of terminal and communication network is estimated performance according to the hand off rate and hand off completion rate of system. we applied MS, SM, MM communication structure in radio CORBA for network availability evaluate. System availability in mobile communication network that can repair that propose in this study uses the hand off rate and hand off completion rate of system by transfer of terminal and availability of whole system did evaluate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.4
• /
• pp.358-363
• /
• 2012

The simulation investigation on the availability of LNG plant with scenario of failure events and failure rate has been carried out. This study focuses on the availability, productivity, criticality induced by failure rate of major equipment. The methodologies for simulation such as the equipment classification of LNG plant and failure type and event schematic are established. The availability and mean time to repair have second order function profile in the all cases except general equipment, but these profiles have different inclination. The production and criticality of the specified LNG plant, simulated by Monte-Carlo algorithm, is located in the range of P = 86~92% and PL = 6~13%.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.295-304
• /
• 2016

Purpose: This paper presents an application of Markov Process to reliability and availability analysis. In order to do that of analysis, we set up a specific case of Tablet PC and it's usage scenario. The case has it some spares and maintenance and repair processes. Methods: Different configurations of the tablet PC and as well as their functions are defined. The system configuration and calculated failure rates of components are modeled from Windchill Quality Solution. Two models, without a spare and with spare, are created and compared using Markov Process. The Matlab numerical analysis is used to simulate and show the change of state with time. Availability of the system is computed by determining the time the system stays in different states. Results: The mission availability and steady-state condition availability in accordance with the mission are compared and the availability of the system with spares have improved availability than without spares. Simulated data shows that downtime of the system increased which results in greater availability through the consideration of spares. Conclusion: There's many techniques and methods to do reliability and availability analysis and mostly are time-independent assumptions. But Markov Process, even though its steady-state and ergodic properties, can do time analysis any given time periods.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.775-787
• /
• 2014

Availabilities of subsea Blowout Preventers (BOP) in the Gulf of Mexico Outer Continental Shelf (GoM OCS) is investigated using a Markov method. An updated ${\beta}$ factor model by SINTEF is used for common-cause failures in multiple redundant systems. Coefficient values of failure rates for the Markov model are derived using the ${\beta}$ factor model of the PDS (reliability of computer-based safety systems, Norwegian acronym) method. The blind shear ram preventer system of the subsea BOP components considers a demand rate to reflect reality more. Markov models considering the demand rate for one or two components are introduced. Two data sets are compared at the GoM OCS. The results show that three or four pipe ram preventers give similar availabilities, but redundant blind shear ram preventers or annular preventers enhance the availability of the subsea BOP. Also control systems (PODs) and connectors are contributable components to improve the availability of the subsea BOPs based on sensitivity analysis.

• Communications for Statistical Applications and Methods
• /
• v.10 no.1
• /
• pp.191-202
• /
• 2003

Availability is an important measure of performance of a repairable component. In this paper, the explicit expression for the availability of a repairable component, which is subject to the policy II(Age Replacement Policy) of Barlow and Hunter (1960), is obtained and the existence of the steady state availability is shown. The steady state availabilities of the model are also obtained for the cases when the mean of the minimal repair time is increasing at a geometric rate or linearly increasing, In order to show the importance and the utility of the obtained result, we also consider an illustrative example of the repairable coherent system whose components are repairable, and the obtained results are applied to derive the steady state availability of the whole system. In this situation, we can see that the condition of the existence of the steady state availability for each component is essential. Some remarks on the optimal replacement policy that maximizes the steady state availability are also given.

• International Journal of Reliability and Applications
• /
• v.16 no.1
• /
• pp.1-13
• /
• 2015

In this paper, we investigate reliability and availability of repairable systems with two types of failure. The first one is to one unit and the second one is to M units in parallel structure. Let failure rate and repair rate of [type1, type2] components are assumed to be exponentially distributed. The expressions of availability and reliability characteristics such as the system reliability and the mean time to failure are derived for two systems. We used several cases to analyze graphically the effect of various system parameters on the reliability system and availability system.

• Journal of Information Processing Systems
• /
• v.8 no.2
• /
• pp.263-278
• /
• 2012

The data grid provides geographically distributed resources for large-scale applications. It generates a large set of data. The replication of this data in several sites of the grid is an effective solution for achieving good performance. In this paper we propose an approach of dynamic replication in a hierarchical grid that takes into account crash failures in the system. The replication decision is taken based on two parameters: the availability and popularity of the data. The administrator requires a minimum rate of availability for each piece of data according to its access history in previous periods, but this availability may increase if the demand is high on this data. We also proposed a strategy to keep the desired availability respected even in case of a failure or rarity (no-popularity) of the data. The simulation results show the effectiveness of our replication strategy in terms of response time, the unavailability of requests, and availability.

• Journal of Communications and Networks
• /
• v.11 no.2
• /
• pp.104-114
• /
• 2009

In this paper, a technique is proposed that enables secondary users to evaluate channel availability in cognitive radio networks. Here, secondary users estimate the utilization of channels via predicting the traffic pattern of primary user, and select a proper channel for radio transmission. The proposed technique reduces the channel switching rate of secondary users (the rate of switching from one channel to another) and the interference on primary users, while maintaining a reasonable call blocking rate of secondary users.

• KSBB Journal
• /
• v.13 no.4
• /
• pp.391-398
• /
• 1998

The effect of culture medium copper availability on the specific growth rate(${\mu}$) and carbon conversion efficiency (CCE) was sutided for an obligatory methanotroph Methylosinus trichosporium OB3b under various combinations of carbon and nitrogen sources. Methane or methanol was used as a carbon source, and nitrate or ammonium was used as a nitrogen source. Medium copper availability determined the intracellular location or kind of methane monooxygenase (MMO), cell-membrane (particulate or pMMO) when copper was present and cytoplasm (soluble or sMMO) when copper was deficient. When methane was used as a carbon source, copper-containing medium exhibited higher ${\mu}$ and CCE than copper-free medium regardless of the kind of nitrogen source. When methanol was used as a carbon source, however, the effect of copper disappeared. Ammonium gave the higher ${\mu}$ and CCE than nitrate for both methane and methanol. Those observation suggest that there exist an important difference in energy utilization efficiency for methane assimilation between sMMO and pMMO.