• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1028-1033
• /
• 2010

The effects of delta-aminolevulinic acid (DALA) or chito-oligosaccharide (COS) in layer diets on production performance, egg quality and hematological characteristics were investigated in this 8-week trial. Two hundred and seventy 27-week-old (Hy-Line brown) layers were randomly assigned to 5 treatments with 9 replications per treatment. Dietary treatments were i) Control (basal diet); ii) DALA1 (basal diet+DALA 2 mg/kg); iii) DALA2 (basal diet+DALA 4 mg/kg); iv) COS1 (basal diet+COS 100 mg/kg) and v) COS2 (basal diet+COS 200 mg/kg). In this study, no significant difference was observed in feed intake and egg shell quality (eggshell breaking strength and egg shell thickness) among treatments. The inclusion of DALA increased egg production during the first 4 weeks. Egg weight was increased in both DALA (quadratic, p<0.05) and COS (linear, p<0.05) treatments compared with the control treatment. Laying hens fed the DALA treatment had an increased yolk color unit (quadratic, p<0.05) and haugh unit (linear, p<0.05) compared with the control group. Similarly, these characteristics were also affected by COS treatments, with both values being linearly increased (p<0.05) in COS treatments compared with the control treatment. Additionally, birds fed DALA treatments significantly increased (quadratic, p<0.05) the number of RBC, WBC and lymphocytes compared with the control treatment. Dietary DALA supplementation linearly increased (p<0.05) the serum iron concentration at the end of the 8th week. The inclusion of COS increased (linear, p<0.05) the concentration of RBC, WBC and lymphocytes compared with the control treatment. In conclusion, dietary DALA at the lower dosage (2 mg/kg) could exert better effects in laying hens than higher dosage (4 mg/kg). Birds fed DALA supplemented diet had an increased iron availability, egg weight, eggshell quality and immunity. Moreover, the inclusion of COS (200 mg/kg) can increase egg weight, eggshell quality and immunity in laying hens. Therefore, both the utilization of COS and DALA could be considered as a new strategy for optimizing egg quality and health condition of laying hens.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.726-736
• /
• 2017

This study was conducted to analyze whether environmental information could be used for environmental inspection. In addition, environmental information was collected and then an environmental information system applicable to inspection was (developed) using the on-site inspection of pollutant emission facilities and interviews with inspection experts based on the collected information. Moreover, the availability of the information was evaluated based on the (dual-purpose) environmental information system. The information was accumulated in the environmental information system and controlled according to its purpose. The environmental information needed for inspection was divided into four categories: information on emissions, information on emission companies, information on inspection records, and geographic information. The environmental information for each system was evaluated based on these four categories. For most of the systems, it was not possible to find the necessary inspection records. Based on the results, a method was proposed to connect and integrate the perspective of applied and environmental information from previous environmental information systems.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.202-225
• /
• 2017

Non Timber Forest Products (NTFPs) has gained a lot of significance over the years as a means of income generation. Forests are playing a vital role in the supply of these products, however, due to their continuous extraction, the population of many species might have depleted. Very little information is known about community structure and population status of NTFPs. No specific studies have been made to find out the occurrence, availability of species and population status in the forests, supplying the resources. The present study has been carried out in community forests of the naturally occurring NTFPs in the temperate forest of the Ziro valley of Arunachal Pradesh. The main aim is to determine community structure, species composition and population status of NTFPs. Three forest stands viz., Nyilii, Dura and Gyachi were selected which are used by the Apatani tribe for extraction of the NTFPs. For evaluation of species composition and community characteristics, the sampling of the vegetation was done using the quadrat method. A total 137 species representing 68 families and 116 genera were recorded. Herbs represent the maximum diversity with 71 species followed by 35 shrub species and 31 tree species. The families Asteraceae and Rosaceaeae exhibited maximum representation followed by Urticaceae. The species under Fagaceae, Lauraceae, Rosaceae and Rutaceae were found to be important NTFP yielding species. Highest species richness was recorded in Nyilii having 124 species, while lowest in Dura with 102 species. Density of tree, shrub and herb ranged between 376 to $456\;individuals\;ha^{-1}$, 2848 to $3696\;individuals\;ha^{-1}$ and 31.44 to $36.64\;individuals\;m^{-2}$, respectively. The total basal area was found to be highest ($51.64m^2\;ha^{-1}$) in Dura followed by Nyilii ($25.32m^2\;ha^{-1}$) and lowest in Gyachi ($22.82m^2\;ha^{-1}$). In all the three study stands the species diversity indices showed the trend, herbs > shrubs > trees while the evenness index showed the trend as shrubs > herbs > trees. The overall species similarity index was highest (82.35%) between Dura and Gyachi. About 80% of the total recorded species showed clumped distribution while, no regular distribution was shown by any species. The three selected stands harbor about 50 important NTFP yielding species which are being used commonly by the Apatani people in their day to day life. Among the three study sites, overall diversity of NTFP was found highest in the Nyilii stand while the density of population was found better in Dura and Gyachi stands. The population of many species was found to be low due to continue harvesting without any sustainable management by the communities. All the selected forest stands have the potentiality to grow the high value NTFP yielding species and if managed properly, they can support the livelihood and economy of the local communities.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.37-51
• /
• 2012

New generation of tall and complex buildings systems are now introduced that are reflective of the latest development in materials, design, sustainability, construction, and IT technologies. While the complexity in design is being overcome by the availability and advances in structural analysis tools and readily advanced software, the design of these buildings are still reliant on minimum code requirements that yet to be validated in full scale. The involvement of the author in the design and construction planning of Burj Khalifa since its inception until its completion prompted the author to conceptually develop an extensive survey and real-time structural health monitoring program to validate all the fundamental assumptions mad for the design and construction planning of the tower. The Burj Khalifa Project is the tallest structure ever built by man; the tower is 828 meters tall and comprises of 162 floors above grade and 3 basement levels. Early integration of aerodynamic shaping and wind engineering played a major role in the architectural massing and design of this multi-use tower, where mitigating and taming the dynamic wind effects was one of the most important design criteria established at the onset of the project design. Understanding the structural and foundation system behaviors of the tower are the key fundamental drivers for the development and execution of a state-of-the-art survey and structural health monitoring (SHM) programs. Therefore, the focus of this paper is to discuss the execution of the survey and real-time structural health monitoring programs to confirm the structural behavioral response of the tower during construction stage and during its service life; the monitoring programs included 1) monitoring the tower's foundation system, 2) monitoring the foundation settlement, 3) measuring the strains of the tower vertical elements, 4) measuring the wall and column vertical shortening due to elastic, shrinkage and creep effects, 5) measuring the lateral displacement of the tower under its own gravity loads (including asymmetrical effects) resulting from immediate elastic and long term creep effects, 6) measuring the building lateral movements and dynamic characteristic in real time during construction, 7) measuring the building displacements, accelerations, dynamic characteristics, and structural behavior in real time under building permanent conditions, 8) and monitoring the Pinnacle dynamic behavior and fatigue characteristics. This extensive SHM program has resulted in extensive insight into the structural response of the tower, allowed control the construction process, allowed for the evaluation of the structural response in effective and immediate manner and it allowed for immediate correlation between the measured and the predicted behavior. The survey and SHM programs developed for Burj Khalifa will with no doubt pioneer the use of new survey techniques and the execution of new SHM program concepts as part of the fundamental design of building structures. Moreover, this survey and SHM programs will be benchmarked as a model for the development of future generation of SHM programs for all critical and essential facilities, however, but with much improved devices and technologies, which are now being considered by the author for another tall and complex building development, that is presently under construction.

• Journal of Periodontal and Implant Science
• /
• v.33 no.2
• /
• pp.289-299
• /
• 2003

The autogenous free gingival graft is the most predictable procedure currently used to increase the width of　the attached gingiva in periodontics. But the major disadvantage of the procedure is to create the multiple surgical wounds at both a donor site and a recipient site. The other problem is the limited amount of available　graft material in oral cavity. Therefore, recent researches have been focused to develop the biomaterial to substitute the autogenous gingival tissue. The purpose of this study was to evaluate the histologic healing after　grafting of bilayer artificial dermis, compared to the free gingival graft. Four non-smoking subjects (mean age, 32.5 years) in systemically healthy state and good oral hygiene were selected according to their particular needs for correction of mucogingival problems as suggested by Nabers(1966). The recipient sites were prepared through the procedure for the free gingival graft and were grouped according to the graft materials: Experimental group(n=5) - bilayer artifcia1 dermis ($Terudermis^{(R)}$; Terumo Co. Japan) and Control group(n=6) - free gingival graft with autogenous palatal mucosa. Biopsies were harvested at 1,2,3 and 6 weeks postsurgery to evaluate histologically. At the third week in the experimental group and at the second week of in the control group, the grafts has been clinically stabilized on the recipient bed and the graft border has been blended into the surrounding tissue. In the experimental group after 1 week of grafting, the epithelial migration from the adjacent tissue to graft material was seen and after 3 weeks of grafting, the : nflmmation decreased, collagen layer of the artificial dermis was lost and the basement membrane of epithelium was formed. After 6 weeks of grafting, both groups demonstrated orthokeratinized epithelium and increased thickness of epithelial tissue and the rete peg formation, similar to the adjacent tissue, Histologic evaluation revealed a biologic acceptance and incorporation of the collagen layers of the graft tissue to the host tissue, without foreign body reaction. In conclusion, a bilayer artificial dermis is essentially similar to autogeneous free gingival graft in the correction of mucogingival problems, and has the advantages of decreased patient morbidity (no donor site) and availability of abundant amounts of graft material when needed.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.303-310
• /
• 2012

In radiotherapy, accurate patient positioning and set up are important factor that treatment can influence success. In generally, the 3-laser system is used when the patient set up. But today the body surface scanning system(C-Rad system) is trying to use. Compare and evaluate the C-Rad system and the 3-laser system to check availability. Head and neck that are no movement of internal organs and easy to apply fixation device are limited. Alderson Rando anthropomorphic phantom and 10 patients who have lesions of head and neck are targeted. C-RAD system's setup error mean and standard deviation are the X axis($0.55{\pm}0.51mm$), Y axis($-0.2mm{\pm}0.523mm$), Z axis($-0.85{\pm}0.587mm$) in the phantom study, and in the patient study X axis($-0.05{\pm}0.621mm$), Y axis($0.075{\pm}0.755mm$) Z axis($-1.025{\pm}0.617mm$). So C-RAD system is better than 3-laser system mostly, but C-RAD system's error rate is a little worse than 3-laser system in the Z axis. When radiation treatment of head and neck, body surface contour scanning system contribute to correct positioning and minimize the set up error.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

At present wireless internet access service is available through the 3G network, mobile WiMAX and WiFi anytime and anywhere. In this environment where there are various networks, users should be able to select specific networks depending on different situations. And it is necessary to provide mobility support between homogeneous and between heterogenous networks. Given this situation, the many proposals have been presented to link 3G, which has the largest service area among various networks, with mobile WiMAX(IEEE 802.16e), or with WiFi(IEEE 802.11). But, recently, with the increasing volume of wireless internet use and wireless internet data, due to the advents of net-book, e-book and smart phone, the service area of WiFi and mobile WiMAX has rapidly expanded. Especially, the availability of real-time application such as internet phone has led to the relative shrinking of the proportion of 3G mobile communication network giving conventional voice service, and enlargement of those of wireless internet access networks like WiFi and mobile WiMAX. This paper suggests a handover scheme based on PMIPv6, whitch support mobility between WiFi and mobile WiMAX, and minimizes handover delay. In this scheme, the mobile node has a dual stack structure composed of two interfaces-WiFi and mobile WiMAX. Since WiFi dose not support mobility, it is suggested that the mobile node have the capacity to deal with handover signaling between gateway in case of handover between homogeneous networks. This handover scheme, suggested comparing with current handovers between homogeneous networks, has proved, in its analytic evaluation, to be able to reduce handover, transmission, and signaling overhead.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.333-339
• /
• 2015

Purpose: The aim of this study was to evaluate clinical characteristics of subjective accommodative lags determined by fused cross-cylinder (subjective method), and an open-field autorefractor (objective method) under uncorrected and corrected conditions. Methods: Thirty three healthy subjects (26 males and 7 females aged $23.73{\pm}1.35$ years from 22 to 27 years) participated. Four methods were used to determine accommodative lag: (1) a subjective method with the fused cross-cylinder (FCC) under +2.00 D fogging lenses condition, (2) an objective method with the autorefractor under uncorrected condition (3) a corrected method (effective accommodative lag) using equations presented by Gwiazda et al. in objective methods, and (4) a corrected method using equations presented by Mutti et al. in objective methods. Results: The mean accommodative lags were 0.72 D for subjective method, 0.82 D for uncorrected objective method, 0.88 D for corrected method with Gwiazda's equations, and 0.78 D for corrected method with Mutti's equations. There were significant differences between the objective accommodative lags, but no significant differences between the objective and subjective accommodative lags. The effective accommodative lags showed significant correlations between phorias and refractive errors. The effective accommodative lag by Mutti's equations had a high correlation with uncorrected accommodative lags (r=0.99, p<0.001). Conclusions: The objective accommodative lag correlated with phorias and refractive errors. Especially, The effective accommodative lag using Mutti's equations may be considered for clinical availability and qualitative evaluation associated with symptoms.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.73-73
• /
• 2017

To set an optimal harvest time of main 7 whole crop silage rice cultivars, Nokyang(Ny), Mogwoo(Mw), Mogyang(My), Jungmo1029(Jm1029), Jungmo1038(Jm1038), Nokwoo(Nw) and Yeongwoo(Yw), based on feed value, we analyzed their feed values such as percent crude protein(CP), crude fat(CF), crude ash(CA), neutral detergent fiber(NDF), acid detergent fiber(ADF) and lignin. It was evaluated every 10 days from heading to 40 days after heading(DAH). Total digestible nutrient(TDN) and relative feed value(RFV) was also calculated from ADF and NDF. As results, CP was generally in decline as increasing DAH in Ny, My, Jm1029, Jm1038 and Yw and decreased to 20 DAH in Mw, decreased after increasing to 30 days in Nw. The CP content of Ny was relatively the highest ranged from 5.3% to 10.1% and Mw the lowest 4.5% to 5.2%, compared to others. CF content tend to decrease as DAH increase in Ny, My and Nw and decreased after increasing to 30 days Jm1029, increased after decreasing to 20 days Jm1038 but was not shown distinct trend of increase or decrease in Mw. Especially, that of Yw's CF gradually increased as harvest time late but relative content the lowest from 1.46% to 2.29% among 7 cultivars. The CA content of Ny, My, Jm1029 and Jm1038 approximately decreased as DAH increased and that of Mw was similar to others after heading, Nw decreased after 10 days and Yw increased after flowering. In all 7 cultivars, NDF and ADF had a tendency to decrease as days accumulated, in particular, Yw was the lowest on 30 DAH and so the content of Yw's TDN the highest(71.5%), while the lowest(67.2%) in Nw. For lignin, particularly, Mw tend to be in decline as DAH increase and was the lowest ranged from 1.34% to 1.87%. ADF analyses allows for the evaluation of in vivo digestible dry matter(DDM) and energy availability and NDF analyses provides the best indication of dry matter intake(DMI). Ultimately, the two factors can be combined to derive RFV for forage. RFV in general increased as DAH increased in all cultivars and was in order, Yw>My>Ny> Jm1038>Mw>Jm1029>Nw on 30 DAH. Taken together when these results, despite a slight increase of TDN after 30 DAH except Yw, considering forage yield potential, digestibility of grains and gradual decrease of CP and CF, the yellow ripe stage, about 30 DAH, was appropriate to harvest whole crop rice for silage use.

• Toxicological Research
• /
• v.23 no.4
• /
• pp.331-339
• /
• 2007

Titanium or titanium alloy is a widely used implant material according to its certified biocompatibility, sufficient strength and ready availability. The purpose of this study was to evaluate the relative biocompatibility of titanium and titanium alloy specimens (Ti-29Nb-13Ta, TiNb and Ti-6Al-4V, Ti64) using in vivo and in vitro methods. For in vivo experiment, the specimens were implanted in the abdominal subcutaneous region of female mice for 2 and 4 weeks. The reaction of connective tissue to specimens was evaluated histologically. The specimens were encapsulated by fibrous connective tissue consisting of fibroblast, fibrocyte and other cells including neutrophil, macrophage, giant multinucleated cell and unidentified cells. Some newly formed blood vessels were located in the fibrous capsule surrounding the implant. Cell types and the thickness of fibrous capsules were examined quantitatively. Most of cell types located in the fibrous capsule were fibroblasts and fibrocytes. The average thickness of fibrous capsules for the TiNb specimens was much thinner than that of the titanium alloy, Ti64. The thickness of the fibrous capsule around all titanium specimens decreased at 4 weeks compared to 2 weeks post-implantation. The biocompatibility of titanium and titanium alloy specimens were also investigated in in vitro method using alkaline phosphatase from MG-63 cells. Alkaline phosphatase activity of the TiNb specimen showed higher activity than the titanium alloy, Ti64. In conclusion, the TiNb alloy with thin capsule thickness in vivo and high alkaline phosphatase activity in vitro will be of considerable use in biomedical applications.