• 제목/요약/키워드: Auxiliary input device

검색결과 19건 처리시간 0.036초

자이로센서를 이용한 손 동작 인식형 보조 입력장치 구현 (Implementation of the Hand-motion Recognition based Auxiliary Input Device using Gyro Sensor)

  • 박기홍;이현직;김윤호
    • 한국항행학회논문지
    • /
    • 제13권4호
    • /
    • pp.503-508
    • /
    • 2009
  • 본 논문에서는 특정인(장애인, 재활치료자, 고령자 등)들이 수월하게 컴퓨터를 사용 할 수 있도록 하기 위한 손동작 인식형 보조 입력장치를 설계하였다. 입력장치는 3차원 공간에서 손 동작 인식을 위해 자이로 센서를 사용하였고, 통신 대역은 무선 RF 2.4GHz 대역에서 신호를 송 수신 하도록 하였다. 제작된 보드는 자이로 모듈, RF 통신 모듈, MCU, USB 단자 등으로 구성되었다. 동작인식 실험결과, 마우스 기반의 커서 이동 및 프로그램 제어 등이 설계 규격대로 수행됨을 확인 하였다.

  • PDF

Wide Band Gap 소자를 적용한 철도차량용 보조전원장치에 관한 연구 (A Study on the Auxiliary Power Supply for the Railway Vehicle by Using Wide Band Gap Device)

  • 최연우;이병희
    • 전력전자학회논문지
    • /
    • 제23권3호
    • /
    • pp.168-173
    • /
    • 2018
  • In this paper, an auxiliary power supply (APS) for railroad cars is proposed. The APS can reduce the number of devices required to supply power through structural modification and operates at a high switching frequency by application of a SiC device. The voltage stress on the device in the proposed circuit can be reduced to less than half of the input voltage of the system; thus, a device with low breakdown voltage can be designed. By adapting a SiC device instead of an IGBT device, the proposed circuit can reduce switching and conduction losses and operate at a high switching frequency, thereby reducing output voltage and inductor current ripples in the proposed circuit. The theoretical analysis results of the proposed APS are verified with a 40 kW computer-based simulation and a 2 kW experiment.

고전력밀도 단일전력단 교류/직류 컨버터 (An Integrated Single Stage AC/DC Converter)

  • 품쏘피악;강철하;김은수;이영수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 추계학술대회 논문집
    • /
    • pp.88-90
    • /
    • 2012
  • A study on an integrated single stage AC/DC converter is presented in this paper. The input current can be controlled by the auxiliary winding($L_{aux}$), auxiliary primary winding($N_3$), and the boost inductor($L_B$) which are designed to operate in discontinuous conduction mode(DCM) to reduced the total harmonic distortion(THD) of input current. The auxiliary primary winding($N_3$) is critically selected in order to compress the input capacitor voltage($V_{in}$) as well as to reduce the current stress of the switch(Q). Low total harmonic distortion(THD), low input voltage($V_{in}$) in universal input voltage($V_{AC}$), low current stress at the switching device and high efficiency are the main consideration keys in this design to achieve high performance system with low cost of single stage AC/DC converter. A 30W single stage AC/DC prototype converter is under study.

  • PDF

철도차량용 보조전원장치의 전향제어를 이용한 Flicker 제어 (The Flicker Control by Feed-forward for Stabilization of CVCF Inverter)

  • 박채운;신형진;조국춘;원충연
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1999년도 추계학술대회 논문집
    • /
    • pp.267-272
    • /
    • 1999
  • The auxiliary power supply system fur passenger service of railway car has been developed from MA(Motor-Alternator) to CVCF Inverter (Static Inverter). Generally, a customer wants to apply tile new control method and device for auxiliary power supply of railcar However, if the auxiliary power supply is supplied to extended existing line, the maintenance cost of the old system is less expensive than new developed system, so, the customer specifies that the auxiliary power supply has compatibility with existing one completely. At that time, the hardware is nearly same as existing system except small changes of accessories for better performance. This paper describes the flicker control using feed-forward method of auxiliary power supply system for new 50 electric railcars, which are delivered to Korean National Railroad (KNR) Kwa-chon Line. The existing power supply system has damping resistor box to stabilize the DC input (1.5 ㎸). At this time, for better system efficiency the new system has not include resistor box but new control method including feed-forward control is applied. This control algorithm realizes the better stabilization of input power compared to the result of the existing system, which includes resistor box

  • PDF

새로운 ZVZCS PWM Boost 컨버터 (A Novel ZVZCS PWM Boost Converter)

  • 김태우;진기호;강안종;김학성
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.327-331
    • /
    • 2003
  • This paper proposes a novel ZVZCS-PWM Boost Converter. It enables the main switch to be turned on and off with both zero voltage and zero current and the auxiliary switch to be turned on and off with ZCS, the rectify diode to be turned on and off with ZVS. Moreover, this converter is suitable for not on]y minority carrier device but also majority carrier device. The auxiliary resonant circuit of the proposed boost converter is placed out the main power path, therefore, there are no voltage/current stresses on the main switch and diode. The operation of the proposed boost converter is explained and analyzed theoretical and experimentally, from a prototype operating at 100kHz, with an input voltage rated at 50V.

  • PDF

정현파 입력 역률개선을 위한 단상 강압형 AC-DC 컨버터 (Sinusoidal Input Power factor Improved for Single-Phase Buck AC-DC Type Converter)

  • 정상화;권순걸;이현우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.338-340
    • /
    • 2001
  • Power factor improved for single-phase buck-converter is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

  • PDF

개선된 보조전원장치에 의한 고조파 저감대책 (Harmonic Reduction Scheme By the Advanced Auxiliary Voltage Supply)

  • 윤두오;윤경국;김성환
    • 해양환경안전학회지
    • /
    • 제21권6호
    • /
    • pp.759-769
    • /
    • 2015
  • 본 논문에서는 12펄스 정류기의 커패시터 중앙 DC버스에 개선된 보조전원장치를 설치하는 방법을 제안하였다. 11차 및 13차 고조파가 감소하는 이론적인 배경을 다루었으며 부하전류의 크기, 전원전압의 위상 및 크기, 커패시터 전압에 따라 개선된 보조전원의 파형 및 크기가 어떻게 제어되어야 하는지를 제시하였다. 기존의 구형파 보조전원장치를 적용한 경우는 전 영역에서 고조파 왜형률이 6~60[%]로 큰 편차를 보이지만 본 눈문에서 제안하는 개선된 보조전원장치를 적용한 경우 저 부하에서 고 부하에 이르는 전 영역에서 57~71[%] 라는 안정되고 뛰어난 고조파 왜형율 저감 효과를 보인다. 특히 10[%] 부하상태에서 기존방식은 고조파 왜형율 저감 효과가 6[%]로 효과가 거의 없지만 제안된 방식은 71[%]라는 놀라운 저감성능을 보여주고 있다. 소프트웨어 PSIM을 활용하여 컴퓨터 시뮬레이션을 통해 제안된 방식의 유효성을 입증하였다.

단상 강압형 정류기의 정현파 입력전류 개선에 관한 연구 (A Study on sine-wave Input Current Correction of Single-Phase Buck Rectifier)

  • 정상화;이현우;서기영;권순걸;김은수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.180-182
    • /
    • 2001
  • Input Current Correction of Single-Phase Buck Rectifier is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated-gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

  • PDF

공진형 보조 회로를 이용한 고역률 AC/DC 컨버터에 관한 연구 (A Study on the High Power-Factor AC/DC converter using Resonant Auxiliary Circuit)

  • 한대희;김용;백수현;배진용;김필수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 B
    • /
    • pp.1110-1113
    • /
    • 2002
  • A Single-Stage Single-Switch power-factor- correction(PFC) AC/DC Converter with universal input is presented in this paper. The PFC Converter can be achieved based upon the continuous current mode(CCM). The switch has less current and voltage stresses over a wide range of load variation so that a low voltage rating device can be used. The presented converter features high power factor high efficiency, and low cost. An 90W prototype was implemented to show that it has 70% efficiency with low voltage stress over universal line input.

  • PDF

장애인을 위한 데이지 도서 기반 독서보조기기 개발의 경제적 타당성 연구 (A Study on the Economic Feasibility of Developing Daisy Book Based Reading Assistive Device for People with Disabilities)

  • 임순범;박주현;이종우;육주혜
    • 재활복지공학회논문지
    • /
    • 제11권4호
    • /
    • pp.279-285
    • /
    • 2017
  • 본 연구는 데이지 독서보조기기 개발 사업 추진함에 따라 발생되는 비용과 효과를 추정하여 타당성 분석을 실시하였다. 필수 기능만을 탑재한 저가의 데이지플레이어기기의 경우 하드웨어/시제품 및 소프트웨어 개발비용은 총 \307,101,664원으로 추정 되며, 생산비는 대당 \112,000원이 될 것으로 추정되었다. 데이지뷰어소프트웨어 및 입출력 보조기기의 경우 애플리케이션 개발비용은 총 \284,294,080원으로 추정되었으며, 입출력보조기기는 대당 \6,600원에 구매 가능함을 확인하였다. 이 결과를 바탕으로 경제적 파급 효과를 파악하여 데이지 독서보조기기 개발 사업 추진이 장애인들에게 미치는 영향을 살펴보았다. 본 연구 결과는 사업의 추진여부에 대한 검토의 근거 자료로 향후 사업 진행 시 환경 변화에 따른 능동적 대처를 위해 유용한 정보가 되기를 기대한다.