• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2002

The Quality Function Deployment(QFD) is a Quality Management technique to maximize customers' satisfaction by reflecting customer requirements into all business processes, including concept definition, product planning, parts planning, process planning, production planning, and sales planning. The basic concept of the QFD is to translate customers' requirements appropriately into engineering characteristics, into parts characteristics, into process characteristics, and into specific requirements and activities in production. In this study, we reviewed and analyzed the application process of the QFD to the development of A2 FATC (Full Automatic Temperature Controller), an automotive component developed and produced by company A. It has been reported that by applying the QFD to the development of A2 FATC, company A. achieved 34% improvement in control robustness quality characteristic, 27% improvement in deviation quality characteristic, and 30% improvement in overall quality characteristics.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.584-593
• /
• 2016

In this study, an improvement design method for reducing the vibration of fenders equipped in a tractor is proposed through the establishment of a finite element model and the topology optimization. As the original shapes of the parts cannot be altered, an improved design model was derived in which a stiffener was attached to the border of parts. Thus, the first resonance frequency was increased by approximately 16 Hz, which was confirmed to be the frequency interval for avoiding the idle and operating frequency of the engine. Finally the improved design model was applied to confirm the effect of vibration reduction. Therefore, it can be concluded that the improved design model of the tractor fender is effective at reducing vibrations of the tractor fender.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.534-542
• /
• 1998

In this paper a simulation model for the powertrain control of gasoline engines with automatic transmission is presented. A modular programming approach has been pursued and the MATLAB/SIMULINK has been utilized as the programming environment. The engine/transmission system is analyzed in the object-oriented fashion whereby easy transferal of the modules, which represent physical parts or analysis subsystems, is guaranteed. Some mathematical models are adopted from the literature to compare the simulation results with the model and the experimental results in the literature. It is expected that the whole program or individual module constructed in this paper are useful for the automotive engineers in designing a new engine/transmission system and/or in modifying parts of existing systems.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.67-72
• /
• 2019

In manufacturing sites that process and produce parts in large quantities for the automotive and electronics industries, users require the reducing of costs and shortened delivery times. To meet these demands, an increase in the number of processes and an decrease in assembly times need to be addressed. Gantry loaders currently on the market in Korea are mostly used for processing lightweight and simple shapes and are not suitable for conveying and processing complex shapes such as automobile engines and aircraft parts. This makes it difficult to mount the material in place. This study aims to smoothen the transportation of complex shapes through the development of jigs and various approaches in the installation of the feed shaft by researching the gantry loader system for transporting multiple materials with complex shapes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.329-332
• /
• 2004

Cast-forging process has a lot of advantages in terms of saving materials along with enhancement of mechanical properties. Therefore, this process has been taken as one of candidate process to manufacturing automotive suspension parts. Since most of cast-forging parts are made with using Al-Si alloys of high castability, the mechanical properties largely depends on the primary ${\alpha}$ and eutectic Si particles. During hot forging step these microstructural features evolve with strain increment. In the present study, the mechanical property evolution was investigated in terms of microstructual evolution with strain. Specially, fracture behavior of A356 alloy was studied to find out how to improve the mechanical properties.

• Transactions of Materials Processing
• /
• v.6 no.6
• /
• pp.508-516
• /
• 1997

Forging process on sintered powder metals has been applied to produce automotive parts which require a high level of strength. In those parts, the measurement of relative density is very important because a low relative density density causes deterioration of strength. In the present study, an indentation force equation was proposed by which the result obtained from the hardness measurement is used to evaluate the relative density. This equation was applied to the prediction of the relative density in cylindrical specimens which were first sintered and then forged at the room temperature and at an elevated temperature. The experimental results were compared with predictions with and without consideration of the workhardening effect on the powder.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.71-78
• /
• 1999

The application range of injection molded parts is expanding by the development of engineering plastics with good mechanical properties. Plastic gears are specially used as automotive parts due to an excellent performance in the characteristics of a strength vs. weight, and the study of injection molding process of plastic gear using Nylon66 is performed in this study. Filling, packing and cooling analyses were done by using the simulation software like Moldflow, and a mold was designed by following the simulation results. Pin-point gates with three points were taken to satisfy the design guides like a full-shot, and lower clamping force and uniform shrinkage. Characteristics of shrinkage of molded gear and temperature difference between cavity and core sides of a mold were shown.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.251-254
• /
• 2005

The flow forming has been used to produce long thin walled tube parts, with reduced forming load and enhanced mechanical and surface quality for a good finished part compared with other method formed parts. So flow forming technique is used widely in industrial production. Especially spinning and flow farming techniques an used frequently in automotive, aerial, defense industry. In this paper, FEM analysis of three-roller backward flow forming of a workpiece is carried out to study effects of forming depth and feed rate on forming force. The axial and radial forces on several forming depth and feed rate conditions are obtained. The phenomena such as bell mouth, build up and bulging during simulation are observed as well.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.10-14
• /
• 2008

The application range of injection molded parts is expanding by the development of engineering plastics with good mechanical properties. Plastic products are specially used as automotive parts due to an excellent performance in the characteristics of a strength vs. weight. In this study, heating type of new method such as jet injection was applied to improve heat transfer coefficient is substituted for heating method of injection molding.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.393-396
• /
• 2009

The mechanical properties, press formability and texture of a TWIP steel were investigated. This steel combines both high strength and high ductility due to so called TWIP effect which are related to the microstructural changes. The formation of twins during deformation leads to an increase of its mechanical properties. In this study, the texture and mechanical properties evolutions of a TWIP steel subjected to tensile tests and press trials at room temperature were investigated in relation to the feasibility of the application to automotive body parts.