• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.49-55
• /
• 2023

In this study, it was analyzed that it is necessary to clarify the quality certification parts system, to make certification codes mandatory for self-certification products that are normally distributed, and to conduct follow-up management so that prompt action and thorough management of test reports are necessary in case of defects. Big data-based data, the detailed number of parts replacement cases, parts cost by part group, share, average labor cost, calculated to analyze the detailed automobile parts industry, and automobile parts certification system and automobile parts market in major countries including Korea and Through the distribution structure analysis, improvement plans for the automobile quality certification parts system were derived.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.385-388
• /
• 2004

The influence of material properties and process parameters on the strain distribution of stamping parts was studied by finite element method. For the parametric study, the investigation of variation of material properties was carried out with tensile test for a dozens of different steel sheets. The friction test for each surface and lubricants conditions are also carried out because the frictional characteristic is important parameter fur sheet metal forming. The geometry of stamping parts was measured by 3D scanner to build the tool model fer the FE analysis. As a result of analysis the major process parameter fer each automotive parts was investigated.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.10-20
• /
• 2017

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.343-343
• /
• 2005

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.27-32
• /
• 2007

Head-Up Display system makes it possible for the driver to be informed of important vehicle data such as vehicle speed, engine RPM or navigation data without taking the driver's eyes off the road. Long focal length optics, LCD with bright illumination, image generator and vehicle interface controllers are key parts of head-up display system. All these parts have been designed, developed and applied to the test vehicle. Virtual images are located about 2m ahead of the driver's eye by projecting it onto the windshield just below the driver's line of sight. Developed head-up display system shows satisfactory results for future commercialization.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.4
• /
• pp.189-198
• /
• 2008

The production of automotive chassis parts requiring both high hardness and good shape-holdability is better realized by using press quenching technology, comprising the austenitizaton and the subsequent press quenching in a specially designed stamping tool. The effect of press quenching mold shape on the hardness distribution, bending height, and degree of planeness of automotive flexible plate during press quenching and tempering has been investigated. The preferable shape of the projections of punch and die in contact with the flexible plate was close to oval to improve the flow of cooling oil, leading to the higher hardness. The press quenching mold with three separate parts was more effective to control the dimensional change due to thermal deformation during press quenching. Some decrease in the bending height during tempering may be related to some recovery of the residual stress at $400^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.609-615
• /
• 2014

Due to the recent global recession, the car industry demand levels have plummeted which led to a crisis in the automotive parts industry for the first time in history. Since the fourth quarter of 2008, the automotive parts manufacturers in America have faced a record loss and those in Japan and Europe who also had a strong track record are facing a weak economy. In addition, the domestic automotive parts industry is also affected by the global economic crisis. This research is that the relative efficiency analysis utilizing the DEA has done on the object of 25 small and medium-sized automotive parts manufacturers publicly listed, As the efficiency analysis result 6 of 25 manufacturers are efficient in CCR model and 12 manufactures have shown efficiency in BCC model, the efficiency analysis in consideration of the manufacturer size. The manufacturers with efficiency 1 in 25 manufacturers are DMU 1, 5, 7, 10, 18, 24 and the relatively benchmarking objects in other manufactures are DMU 1, 10, 24, Based on the results of this research, a direction to the domestic automotive parts manufacturers as well as a significant information will be provided in managing the companies in the future by the improvement of management efficiency through the practical efficiency analysis.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.3
• /
• pp.327-337
• /
• 2019

The aim of this research is to contribute to enhancing the competitiveness of automotive parts suppliers while departing from the dependent relationship structure, by developing and interpreting factors that affect sale, which are financial achievements, in a practical way. The research data covered 200 companies from 2013-2017. The study hypothesis was verified by dividing the hypothesis into Model1 with control variables only and Model2 with control variables in independent variables. As a result of hypothesis testing, regarding sales, only capital size showed to have an effect in Model1, while in Model2, asset size, number of employees and joint ventures with foreign companies did but the other remaining factors did not. In particular, the results showed that an increase in financial performance required 'Economies of scale', and that companies that concentrated on a small number of items, diversified products into four or more items, or owned two to four suppliers, reaped positive results in financial performance. Therefore, in addition to the selection and concentration of corporate management for production items and account management, applying strategies, like the inter-company M&A, consortiums and co-branded strategies to achieve 'Economy of scale', would highly enhance the financial performance of automotive parts suppliers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.89-100
• /
• 2023

Recently, as ESG management has become an important issue, major companies in the automotive parts manufacturing industry are conducting ESG evaluations of their suppliers for the purpose of supply chain management. The results of these evaluations are being incorporated into contractual agreements. However, many small and medium-sized enterprises(SMEs) are lacking in their capacity and resources to effectively respond to ESG evaluations. Furthermore, existing ESG management guidelines do not provide an industry-specific guidance, making it necessary to establish industry-specific guidelines that SMEs can refer to. Therefore, in this study, the evaluation Indicators of ESG supply chain assessments are surveyed, which is conducted by domestic major automotive parts companies and global automobile manufacturers. Then 56 supply chain ESG evaluation Indicators are derived. Also, ESG management indicators for SMEs is analyzed through the Importance-Performance Analysis(IPA), based on an interview of expert groups. Therefore, this study could propose industry-specific ESG guidelines, based on the results of the derived indicators, which reflects the need for SMEs to practice ESG management within certain boundaries.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.71-80
• /
• 2007

In this study, an inspection system for valve seal of automotive parts using standalone vision has been developed and presented. The system is comprised of eight CCD cameras, and mechanism that loads the automotive parts to the system for the inspection. An image processing algorithm for detecting two different types of defects of valve seals are developed and the effectiveness of the algorithm is experimentally verified. Inspection process is completed in 0.7 second with acceptable accuracy condition. It is envisaged that this inspection system will have a wide application in the automotive part manufacturing industry in the future.