• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.139-140
• /
• 2015

차량용 에어컨 시스템은 엔진의 가동(주행 또는 공회전)에 의해 발생되는 에너지를 이용하여 운전자가 원하는 차량 실내온도를 유지시켜주는 장치를 말한다. 이러한 기계식 에어컨 시스템의 작동은 엔진 구동력의 일부를 활용하고 있어 자동차의 연비와 큰 관련성 있다. 때문에 하절기 작업 대기시나 차량 내 야간취침 등이 빈번한 상용차량의 경우 운전자의 운행습관에 따라 연료 소비량이 증가하는 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 대형 상용차량이 정차중인 무시동 기간에도 일정 온도의 유지가 가능 하도록 전력변환장치가 적용된 에어컨 시스템을 제안하였다.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.625-636
• /
• 2019

This paper proposes an active leakage magnetic field (LMF) suppression scheme, which uses the dual-transmitter (DT) topology, for EV wireless charging systems (EVWCS). The two transmitter coils are coplanar, concentric and driven by separate inverters. The LMF components generated by the three coils cancel each other out to reduce the total field strength. This paper gives a detailed theoretical analysis on the operating principles of the proposed scheme. Finite element analysis is used to simulate the LMF distribution patterns. Experimental results show that when there is no coil misalignment, 97% of the LMF strength can be suppressed in a 1kW prototype. These results also show that the impact on efficiency is small. The trade-off between LMF suppression and efficiency is revealed, and a control strategy to balance these two objectives is presented.

• 전자공학회논문지
• /
• 제54권7호
• /
• pp.61-70
• /
• 2017

본 논문에서는 넓은 작동 온도 범위를 위해 온도보상기능을 가지는 이더넷 이퀄라이저를 소개한다. 차량 내부에 서로 통신하는 센서가 많아지면서, 차량용 통신에 대한 중요성이 높아진다. 많은 통신 방법 중에 이더넷 프로토콜은 넓은 통신 대역폭과 호환성을 가지기 때문에 차량용 통신을 위해 가장 선호되는 기술이다. 그러나 차량용 규격인 AEC-Q100을 만족시키기 위해서 제안하는 이더넷 통신 시스템은 $-40^{\circ}C$에서 $150^{\circ}C$에 해당하는 온도 범위에서 작동해야한다. 본 논문에서는 100m길이의 CAT-5 케이블에서 데이터를 보상하는 이더넷 이퀄라이저를 설계한다. 또한, 넓은 온도 범위에서 작동하기 위해 피드백 시스템을 이용한다. 제안하는 이퀄라이저는 완전 차동형 구조로 31.25MHz의 대역폭을 가지고 Hynix $0.13{\mu}m$ BCDMOS 기술로 구현한다.

• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.283-290
• /
• 2022

This study proposes a voltage control scheme in a synchronous reference frame to improve the dynamic characteristics of double-conversion UPSs. UPSs need to control positive and negative sequence voltage, so that positive and negative sequence extractors are generally used to obtain each sequence of the voltage and current. Voltage and current controllers for each sequence are implemented. However, the extractor causes considerable delay, and the delay restricts the control performance, especially for the current controller. To improve the dynamics of the current controller, the proposed scheme adopts a unified current controller without separating positive and negative sequences. By using discrete-time current controller, the control bandwidth can be extended significantly so that negative sequence current can be controlled. To enhance the performance, an additional feed-forward technique for output voltage regulation is proposed. The validity of the proposed controller is verified by experiments.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.565-574
• /
• 2015

Recently, a medium-level representation named "Stixel" has been extensively researched in stereo vision-based environmental perception. Obstacle detection using Stixel representation consists of three steps: static Stixel generation, dynamic Stixel generation, and Stixel segmentation. This paper focuses on the Stixel segmentation step and has two contributions. One is that it shows that Stixel segmentation performance can be enhanced by utilizing both image domain and real world domain features. The other is that it suggests that parameters used for Stixel segmentation can be effectively tuned based on genetic algorithm. The proposed method was quantitatively evaluated and the result showed that the proposed method increased Stixel segmentation accuracy compared with the previous method.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.333-343
• /
• 2019

Dead time and the nonideal characteristics of components all lead to phase voltage distortions. In order to eliminate the harmful effects caused by distortion, numerous methods have been proposed. The efficacy of a method mainly depends on two factors, the compensation voltage amplitude and the phase current polarity. Theoretical derivations and experiments are given to explain that both of these key factors can be deduced from the compensation time, which is defined as the error time between the ideal phase voltage duration and the actual phase voltage duration in one Pulse Width Modulation (PWM) period. Based on this regularity, a novel method for compensating phase voltage has been proposed. A simple circuit is constructed to realize the real-time feedback of the phase voltage. Utilizing the actual phase voltage, the compensation time is calculated online. Then the compensation voltage is derived. Simulation and experimental results show the feasibility and effectivity of the proposed method. They also show that the error voltage is decreased and that the waveform is improved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권2호
• /
• pp.663-677
• /
• 2023

As the paradigm of future vehicles changes, the interest in automotive semiconductor, which plays a key role in realizing this, is increasing. Automotive semiconductors are the technology with very high entry barriers that require a lot of effort and time because it must secure technology readiness level and also consider safety and reliability. In this technology field, it is very important to develop new businesses and create opportunities through technology trend analysis. However, systematic analysis and application of automotive semiconductor technology trends are currently lacking. In this paper, U.S. registered patent documents related to automotive semiconductor were collected and investigated based on the patent's IPC. The main technology of automotive semiconductor was analyzed through topic modeling, and the technology path such as emerging technology was investigated through cosine similarity. We identified that those emerging technologies such as driving control for vehicle and AI service appeared. We observed that as time passed, both convergence and independence of automotive semiconductor technology proceeded simultaneously.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 동계학술발표대회 논문집
• /
• pp.20-20
• /
• 2006

• 전자통신동향분석
• /
• 제33권4호
• /
• pp.61-69
• /
• 2018

Driver-specific technology in the automotive field has been commercialized for vehicle accessories, driver memory sheets, and side mirrors. In recent years, the demand for customized technology has expanded to include the user interface of an infotainment system (Infotainment System) and advanced driver support system (Advanced Driver Assistance System), and customized technologies for drivers have been studied. Therefore, this article describes the driver-tailored technology trends being studied in these fields, and examines the major research issues related to future driver-tailored technologies in the automotive field.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1027-1029
• /
• 2002

In this paper, we present the circuit topology and control scheme of single-phase dc/ac inverter based on class E dc/dc converter for automotive application. The proposed inverter consists of class E series resonant inverter and class E low dv/dt PWM synchronous rectifier with bi-directional switch.