• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.1-7
• /
• 2015

In this study, properties of Pb-free solders for automotive electronics parts were discussed. Lead-free solders for electronics became important after RoHS (Restriction of the use of certain Hazardous Substances) to avoid environmental pollution. Also the growing electronic rate in automotive parts and ELV (End-of Life Vehicles) make Pb-free solder for automotive electronics to be inevitable trend. Definitely, Pb-free solder for automotive electronics should have good wettability, basic strength, but need more reliability than other solders, since it has harsh condition like high temperature, humidity and engine vibration. Thus, shear strength test, thermal shock, drop test and many others are needed to ensure the high reliability. This study describes the properties and requirements of Pb-free solders for automotive electronics.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.22-30
• /
• 2013

Due to ELV banning, automotive electronics cannot use four kinds of heavy metal element (Pb, Hg, Cd, $Cr^{6+}$) from 2016. Therefore, this study was focused on degradation characteristics of Sn-3.0Ag-0.5Cu Lead-free solder joint with OSP and ENIG finsh under various reliability assessment method, as like to thermal shock test and high temeprature/high humidity test with test duration for cabin electronics. Also, we compared bonding strength degradation to other advanced research results of electronic control unit for engine room because of difference service temperature with mount location in automotive. Whisker growth phenomenon and mitigation method which were essentially consideration items for Pb-free car electronics were examined. Conformal coating is a strong candidate for mitigating whisker growth in automotive electronics. Necessary condition to adapt Pb-free in car electronics was shown.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.204-207
• /
• 2005

A reliable and practical finite element modeling technique to predict the lifetime of automotive electronics is important for engineers in reliability. In reliability evaluation on the automotive electronics, most studies rarely used FE model verification process. The material properties and boundary conditions are very important factors in this process to assure the reliability of the automotive electronics. This study aims to develop a better and more accurate FE model in order to predict fatigue life of the automotive electronics using Virtual Qualification lifetime assessment techniques. After conducting the modal analysis by the experiments to grasp a system characteristic, this paper presents material properties and boundary conditions that is obtained by the comparisons of FEA simulation results using DOE technique and the experiment results.

• 오토저널
• /
• 제23권6호
• /
• pp.26-33
• /
• 2001

• Journal of Welding and Joining
• /
• 제33권3호
• /
• pp.25-31
• /
• 2015

Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from electronic devices and system. Specifically, reliability issue of lead-free solder joint have an increasing demand for the car electronics caused by ELV banning. The authors prepared engine control unit and cabin electronics soldered with Sn-3.0Ag-0.5Cu (SAC305). To compare with the degradation characteristics of solder joint strength, thermal cycling test (TC), power-thermal cycling test (PTC) and series tests were conducted. Series tests were conducted for TC and PTC combined stress test using the same sample in sequence and continuously. TC test was performed at $-40{\sim}125^{\circ}C$ and soak time 10 min for 1000 cycles. PTC test was applied by pulse power and full function conditions during 100 cycles. Combined stress test was tested in accordance with automotive company standard. Solder joint degradation was observed by optical microscopy and environment scanning electron microscopy (ESEM). In addition, to compare with deterioration of bond strength of quad flat package (QFP) and chip components, we have measured lead pull and shear strength. Based on the series test results, consequently, we have validated of series test method for lifetime and reliability of Pb-free solder joint in automotive electronics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.1-8
• /
• 2000

Automotive electronics as we know it today encompasses a wide variety of devices and systems. Key to them all, and those yet to come. is the ability to sense and measure accurately automotive control parameters. In other words, sensors and actuators are the heart of any automotive electronics application. The important of sensors and actuators cannot be overemphasized. The future growth of automotive electronics is arguably more dependent on sufficiently accurate and low-cost sensors and actuators than on computers, controls, displays, and other technologies. Without them, all of controls system - engine. transmission. cruise, braking, traction, suspension, steering, lighting, windshield wipers, air conditioner/hearter - would not be possible. Those controls, of course, are key to car operation and they have made cars over the years more drivable, safe, and reliable. In this lecture, the principle and future trends of electronic control gasoline engine will be discuss.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.672-674
• /
• 1997

In this paper, we study the idle speed control of the spark ignition engine. Engine idle speed control is a difficult problem because of troublesome characteristics such as severe process nonlinearities, variable time delays, time-varying dynamics and unobservable internal system states and disturbances. We investigate the intelligent control algorithms such as neural network controller and fuzzy controller for 4-cylinder 4-stroke engine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1611-1612
• /
• 2006

We are using the Faraday's electromagnetic law so as to improve our life in various industry fields. However, the side effect of the Faraday's law can be occurredin the sensors of the vehicle due to the high current flow such as Ignition. This effect is mainly caused by the shape of the wiring harness between sensor and high current load in the vehicle. To minimize the side effect by Faraday's law, three methods shall be considered in this paper (1) Pin definition of the sensor, (2) Pin definition of the high current load, (3) Wiring harness shape.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 춘계학술발표대회
• /
• pp.70-71
• /
• 2023

최근 자동차는 다양한 서비스를 제공하는 플랫폼으로 진화하고 있다. 이러한 서비스를 제공하기 위한 기본 인프라는 차량간 통신이다. 하지만, 자동차의 높은 이동성은 무선 통신 링크의 단절을 빈번하게 일으키는 요인이 된다. 따라서 링크의 단절에 대처하기 위한 효율적인 대책이 필요하다. 본 논문은 통신 링크 단절로 인한 성능 저하를 줄이기 위한 릴레이 노드 선택 기법을 제안한다. 시뮬레이션을 통한 성능 분석에서 제안하는 기법을 통해 네트워크 성능이 향상되는 것을 보여준다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 춘계학술발표대회
• /
• pp.72-73
• /
• 2023

도로 사고의 30% 이상이 도로 환경 조건에 의해 발생되는 것으로 추정된다. 따라서, 도로 환경의 정보는 사고를 줄이기 위한 한 방편이 될 수 있다. 본 논문은 도로 환경을 모니터링하기 위해 설치된 센서들로부터 효율적으로 데이터를 수집하기 위한 멀티 채널 토폴로지 관리 기법을 제시한다. 센서들의 밀집도가 높아져도 제안하는 기법을 통해 데이터 충돌과 에너지 소모를 줄일 수 있다. 시뮬레이션 성능 분석에서 제안하는 방식을 통해 수집되는 데이터가 증가하는 것을 확인할 수 있다.