• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.99-111
• /
• 2016

This paper presents an integrated fault diagnosis algorithm for driving motor of In-wheel independent drive electric vehicle. Especially, this paper proposes a method that integrated the high level fault diagnosis and the low level fault diagnosis in order to improve a robustness and performance of the fault diagnosis system. The high level fault diagnosis is performed using the vehicle dynamics analysis and the low level fault diagnosis is carried using the motor system analysis. The validity of the high level fault diagnosis algorithms was verified through $Carsim^{(R)}$ and MATLAB/$Simulink^{(R)}$ cosimulation and the low level fault diagnosis's validity was shown by applying it to a MATLAB/$Simulink^{(R)}$ interior permanent magnet synchronous motor control system. Finally, this paper presents a fault diagnosis strategy by combining the high level fault diagnosis and the low level fault diagnosis.

• 한국항행학회논문지
• /
• 제18권4호
• /
• pp.381-386
• /
• 2014

전기 커넥터에 영향을 주는 프레팅 부식 요인 중 하나인 접촉 부하의 영향을 조사하기 위하여, 프레팅 부식 표본 쌍을 두께 $3{\mu}m$의 두께를 갖는 주석으로 도금된 황동 표본을 사용하여 제조하였다. 접점의 전기저항은 프레팅 부식 시험 기간 동안 측정되었다. 프레팅 주기에서 저항은 증가하였다. 저항의 변화는 3단계로 나눌 수 있다. 첫 번째 단계는 미미하고 안정적인 저항을 나타내었다. 두 번째 단계는 저항이 꾸준한 증가를 보여 주었다. 그리고 세 번째 단계는 매우 높고 간헐적인 저항을 보여주었다. 실패주기(Nf)와 접촉력(P) 사이의 관계는 다음과 같이 표현될 수 있다. 각각의 하중, 변위, 온도 등 다양한 조건에서 프레팅 테스트를 통해 다양한 환경 조건 하에서 매우 높고 간헐적인 저항에 대응 전기 커넥터의 실패주기 예측공식의 표현이 가능할 것이다.

• 드라이브 ㆍ 컨트롤
• /
• 제12권3호
• /
• pp.18-24
• /
• 2015

The plug-in hybrid electric vehicle has a high fuel economy and can be driven long distances. Its different modes include the electric vehicle, hybrid electric vehicle, and only engine operating mode. A power management strategy is important to determine which mode should be selected. The strategy makes the vehicle more efficient using appropriate power sources for driving. However, the strategy usually needs a driving speed profile which is future driving cycle. If the profile is known, the strategy easily determines which mode is driven efficiently. However, it is difficult to estimate the speed profile for a real system. To address this problem, this paper proposes a new power distribution strategy using a neural network. The average speed and driving range are used as input parameters to train the neural network system. The strategy determines a limit for the use of the battery and the desired power is distributed between the engine and the motor simultaneously. Its fuel economy can increase by improving the basic strategy.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.31-39
• /
• 2013

A virtual chassis platform for Fuel Cell Hybrid Electric Vehicles(FCHEV) has been developed, and a virtual platform similar to the actual system has been composed. In addition, major components such as a motor, fuel cell and battery for the virtual platform have been constructed by using a mathematical formulation. The FCHEV virtual platform using a detailed model based on the mathematical formula is capable of simulating various conditions according to changes of the control logic and component modules to evaluate performance, considering the vehicle dynamic characteristics. Usability of the mathematical model has been verified by comparative simulations according to the motor current control variation. In addition, reliability of the developed virtual chassis platform has been verified by simulating its fuel consumption with the UDDS(Urban Dynamometer Driving Schedule) FTP-72 velocity profile.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.1149-1150
• /
• 2023

본 논문은 자동차의 ECU 사용의 증가에 의해 개발한 자동차 소프트웨어 아키텍처 표준인 UTOSAR(AUTOmotive Open System ARchitecture)와 이의 최신 기술 동향인 Adaptive AUTOSAR, 그리고 소프트웨어 정의 차량(Software Defined Vehicle)에 대해 조사하고 분석하였다. 이러한 AUTOSAR와 SDV의 발전은 자동차 산업의 미래를 형성하는 주요한 도구로서, 효율적인 자동차 소프트웨어 개발과 관리를 지원하며 더욱 지능적이고 연결된 자동차의 실현을 위한 기반을 마련한다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.92-99
• /
• 2008

This paper describes an signal processing method for the hall sensorless position control of ETC control system using a BLDC motor. The proposed ETC control system, which is mainly consisted of a BLDC motor, a throttle plate, a return spring and reduction gear, has a position sensor with an analog voltage output on the throttle valve instead of BLDC motor for detecting rotor position of motor. So the additional commutation information is necessarily needed to control the mentioned ETC module. In order to estimate and determine the commutation state, it is proposed to properly manipulate the resolution of A/D converter considering the mechanical parameter, that is, the number of motor slot and the ratio of reduction gear. Through this method, the estimation of commutation state for operating the system is possible and the discrete signal for commutation is stably obtained. The validity of the method is examined through the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.247-249
• /
• 2007

Urban dynamometer driving schedule(FTP-75 mode) plays very significant role on automotive emission test, due to reference point. The overall system energy efficiency of a HEV(Hybrid Electric Vehicle) is highly dependent on the energy management strategy employed. An energy source is the heart of a HEV. In order to applicable to a vehicle component, it must be need to real world test result. But, the present state of things have numerous problems. In this paper, be studied performed based on HEV simulation software in virtual world and chassis dynamometer test in real world and the result make a comparative. Toyota Prius vehicle was adapted as a modeling and real testing to evaluate the hybrid components and energy balancing management. The point at issue is voltage and current analysis for HEV battery SOC(State of Charge), and verification for energy.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.822-827
• /
• 2013

본 논문에서는 정지시까지 전기제동을 하는 축소모형 추진시스템을 설계하고 제작하여 실험하였으며, 정지순간 제동토오크의 제어방법을 제안하였다. 또한, 레졸바를 사용한 회전자의 위치와 속도를 추정하는 관측기에 의하여 극저속에서 속도를 검출하는 방법을 개발하였으며, 또한 정지순간 제동 토오크의 감소와 동시에 공기 브레이크의 동작을 개시하여 블렌딩 제동을 사용하는 방법과 비교하여, 정지시까지 전기제동만을 사용하는 향상된 제동방법을 제안하였다.

• 한국전자통신학회논문지
• /
• 제13권2호
• /
• pp.443-448
• /
• 2018

최근 이산화탄소에 따른 지구온난화 문제와 배기가스의 저감을 위하여 하이브리드 자동차가 각광을 받고 있다. 하이브리드 자동차는 기계적인 엔진과 전기적인 모터시스템이 결합된 동력구조를 갖는다. 차량의 주행조건에 따라 하이브리드 자동차의 구동을 위해 필요로 하는 에너지의 흐름은 달라진다. 본 논문에서는 실시간 모니터링 시스템을 이용한 하이브리드 자동차 교육용 콘텐츠에 관한 연구를 대상으로 한다. 하드웨어와 버추얼 프로그램으로 구성된 실시간 모니터링 시스템을 이용하여 하이브리드 자동차의 전체적인 운행을 주행조건별로 시뮬레이션을 통해 모사하고, 하드웨어를 통해 학습할 수 있는 방법에 대해 기술한다.

• Journal of information and communication convergence engineering
• /
• 제7권1호
• /
• pp.46-51
• /
• 2009

In this paper, the two-axis theory is adopted to analyze the secondary excited induction generator applied to random wave input generation system. The analysis by the two-axis theory helps to know the transmitted power of the induction machine. The electric variables, like as primary and secondary currents, voltages, and electric output power, were able to express as equations. These equations are help to simulate the generation system numerical model and to know the transient state of the system. As it is preferred to stabilize the output voltage and frequency in the constant level, microcomputer controlled VSI connected to the secondary windings supplies the secondary current with slip frequency. For testing the appropriateness of this method, the input torque simulator in the laboratory to drive the secondary excited results show the advantage of secondary excited induction generator system for the random input wave generation system.