• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.39-43
• /
• 2008

Productivity is one of the performance indices of the semiconductor equipment in manufacturing viewpoint. Among many ways tried and adopted for improvement of the productivity of the FAB equipment, variation of equipment configuration was considered and its effect on the throughput was analyzed. Parallel machine cycle charts that were generated based on the equipment log were used in the analysis. Efficiency of the equipment due to change of the structure and the probability of the usage in the manufacturing process were examined. The results showed that the modification of the control algorithm in the equipment and the redistribution of the process time for each process and transfer module along to the change in the structure enhance the throughput of the equipment.

• Industrial Engineering and Management Systems
• /
• 제10권4호
• /
• pp.288-291
• /
• 2011

Recommendations for older driver-friendly automobile interior design have been determined by taking into account older people's physical and cognitive characteristics. Twenty three older people (aged from 54 to 78) and five younger people (from 20 to 29) performed several tasks in actual driving conditions, in which their reaction times and performance errors were recorded. Some design factors were found to be related to older drivers' visibility and controllability. Several design recommendations were proposed in terms of cluster color and font, display location, and HVAC control type. Proposed recommendations are expected to satisfy a wider range of older drivers as these will facilitate automobile interior designs which are fitter to older drivers' visual, cognitive, and manual capabilities.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.15-21
• /
• 2009

Atmospheric pressure plasma equipment was successfully applied to the flip chip BGA manufacturing process to improve the uniformity of flux printing process. The problem was characterized as shrinkage of the printed flux layer due to insufficient surface energy of the flip chip BGA substrate. To improve the hydrophilic characteristics of the flip chip BGA substrate, remote DBD type atmospheric pressure plasma equipment was developed and adapted to the flux print process. The equipment enhanced the surface energy of the substrate to reasonable level and made the flux be distributed over the entire flip chip BGA substrate uniformly. This research was the first adaptation of the atmospheric pressure plasma equipment to the flip chip BGA manufacturing process and a lot of possible applications are supposed to be extended to other PCB manufacturing processes such as organic cleaning, etc.

• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.88-93
• /
• 2021

The automotive industry is developing day by day. Among them, it is very important to prevent accidents while driving. However, despite the importance of developing automobile industry technology, accidents due to road defects increase every year, especially in the rainy season. To this end, we proposed a road defect detection system for road management by converging deep learning and raspberry pi, which show various possibilities. In this paper, we developed a system that visually displays through a map after analyzing the images captured by the Raspberry Pi and the route GPS. The deep learning model trained for this system achieved 96% accuracy. Through this system, it is expected to manage road defects efficiently at a low cost.

• 한국광학회지
• /
• 제10권2호
• /
• pp.120-127
• /
• 1999

Head-Up Display(HUP)에 사용되는 홀로그래픽 광결합기의 회절 효율 및 결상 특성을 분석하고 제작하였다. Kogelnik의 결합파이론을 통해 반사형 체적 홀로그램에 대한 각도 및 분광 대역 특성을 수치계산하고 홀로그래픽 광학소자에서의 파장 변화에 의한 색수차의 최소화 방법을 HUD의 재생각 및 초점거리 보정에 응용하였다. 또한 자동차에 사용되는 형태로 등각형(conformal type)과 비등각형(non-conformal type)의 홀로그래픽 광결합기를 비교하고 대역 특성을 실험적으로 분석하였다. 실제적으로 등각형 보다 넓은 각도 대역폭을 보이며 광학적 배율(optical power)을 지니는 홀로그래픽 광결합기를 설계, 제작하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.940-941
• /
• 2015

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14W power consumption and start up voltage time is under the15ms in the ambient temperature $-20^{\circ}C$.

• 인지과학
• /
• 제11권1호
• /
• pp.1-8
• /
• 2000

운전자에게 자동차에 관련된 중요한 시각적 정보는 주로 계기반을 통해 제공되어 진다. 이런 계기반이 시인/시계성을 고려하여 설계되어 졌을 때, 운전자는 주행중에 시야 확보 및 자동차 관련 시각정보들을 신속하고 정확하게 인지할 수 있게 된다. 즉 계기반은 운전자의 과제 수행도와 직접적인 관계를 갖는다고 볼 수 있으며, 운전자-자동차간의 상호작용에 관여하는 중요한 장치라고 할 수 있다. 이러한 이유로 외국의 경우는 계기반의 형태와 특성 및 색상까지를 고려한 다방면의 연구가 진행되고 있다. 현재 대부분의 차종이 Analog display의 형태를 따르고 있지만, 위치에 대한 명확한 표준이 없이 각기 다른 형태 및 배치를 갖는다. 따라서 본 연구는 계기반 주요 Object(속도계, 타코미터, 연료계, 온도계)의 배치특성에 대한 운전자의 선호도여부와 계기반 Object의 위치가 운전자에게 영향을 주는 요인여부에 관하여, 본 실험실에서 제작한 평가도구(VISVEC System)를 사용하여 실험하였다. 실험결과로 피험자가 선호하는 배열특성이 인지정확도 여부에 미치는 영향과의 연관성은 볼 수 없었으나, 계기반의 주요 Object는 각각의 영역을 갖는 것이 Visual 정보 인지에 용이하다는 것을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2014

본 논문은 스트레쳐블 폴리머 디퓨저를 이용하여서 간섭성이 있는 레이저의 단점인 스페클 효과를 감소하는 결과를 비교 분석하였다. 자체 제작한 RGB 모듈을 기반으로 하여 빔 컴바이너를 거쳐서 레이저빔을 집속한 후 고전압 저주파수를 통해서 레이저빔을 균질화 하였다. 평균 180~300Hz 정도의 주파수를 가한 결과 레이저빔의 균질효과가 나타났다. 컴퓨터 시뮬레이션을 통한 디퓨저와 DMD 반사경을 구현 하였으며, 808nm 레이저빔을 가상으로 조사하여서 디퓨저 유무에 따른 빔의 산란도 및 균질도를 검증 하였다. 결과적으로 디퓨저를 통한 빔의 균질도가 산란효과를 감소시켰고, 이를 통한 디스플레이 선명도를 개선할 수 있을 것으로 기대된다. 청색레이저의 투과도가 83% 정도로 적색이나 녹색 레이저에 비해서 상대적으로 취약하였는데, 이는 디퓨저 내부를 통과시 레이저 빔의 굴절의 양이 많아져서 확산 각이 증가하였기 때문으로 분석되었다. 레이저와 광학 장치 사이에 디퓨저를 사용하여 이미지 구현했을 때 스페클 패턴은 제거되었으며, 레드(650nm), 그린(532nm), 블루(405nm) 파장에서 10-20%정도의 밝기 감소가 나타났으며, 전체적인 밝기 감소는 13%정도 이루어졌다. 또한, 스트레쳐블 폴리머를 이용한 경우 시간축 균질도도 30fs에서 110fs로 개선 되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.950-955
• /
• 2004

In the manufacture of liquid crystal display devices, there is a strong demand for contactless glass plate handling devices that can manipulate a glass plate without contaminating or damaging it. To fulfill this requirement, an electrostatic transportation device for glass plates is proposed. This device can directly drive a glass plate and simultaneously provide contactless suspension by electrostatic forces. To accomplish these two functions, a feedback control strategy and the operational principle of an electrostatic induction motor are utilized. The stator possesses electrodes which exert electrostatic forces on the glass plate and are divided into a part responsible for suspension and one for transportation. To accomplish dynamic stability and a relatively fast suspension initiation time, the structure of the electrode for suspension possesses many boundaries over which potential differences are formed. In this paper, an electrode pattern suitable for the suspension of glass plates is described, followed by the structure of the transportation device and its operational principle. Experimental results show that the glass plate has been transported with a speed of approximately 25.6 mm/s while being suspended stably at a gap length of 0.3 mm.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.550-556
• /
• 2009

In an application of a time reversal(TR) focusing of array transducer on a defect inside the test material, we employ a new time delay focusing technique based the TR process. In order to realize this idea, a multi-channel ultrasonic system is constructed capable of applying necessary time delays to each channel. The TR-based focusing procedure first measures the backscattered signals after firing one of the array elements. A phase slope method is then used to determine the time-of-flights of the backscattered signals received by all elements of the array. These time delays are used to adjust the time of excitation of the elements for transmission focusing on the defect. In addition to the TR focusing, the classical phased array focusing is also considered for comparison. Experimental results show that the TR-based time delay focusing produces much stronger backscattered signals than the phased array focusing, demonstrating the enhanced capability of the TR focusing.