• 반도체디스플레이기술학회지
• /
• 제15권3호
• /
• pp.12-17
• /
• 2016

In this study, numerical simulations for the conjugate heat transfer of air with a heat-sink of CPU were conducted. The heat-sink consisted of many fins of cylinder shape and the effect of the number of fins on the cooling performance of the heat sink was investigated. Grid independent solutions were obtained to compare the maximum temperature of the heat-sink for various conditions. It was found that maximum temperature of the heat-sink asymptotically approached 310K as the number of fins went to infinity. The energy exchange of air with the heat-sink was found to be nearly independent on the number of fins.

• Journal of Mechanical Science and Technology
• /
• 제19권6호
• /
• pp.1329-1337
• /
• 2005

The OLED (Organic Light Emitting Diodes) display recently used for the information indicating device has many advantages over the LCD (Liquid Crystal Display), and its demand will be increased highly. The linear cell should be designed carefully considering the uniformity of thin film on the substrate. Its design needs to compute the temperature field analytically because the uniformity for the thin film thickness depends on the temperature distribution of the source (organic material). In the present study, the design of the linear cell will be modified or improved on the basis of the temperature profiles obtained for the simplified linear cell. The temperature distributions are numerically calculated through the STAR-CD program, and the grids are generated by means of the ICEM CFD program. As the results of the simplified linear cell, the temperature deviation was shown in the parabolic form among the both ends and the center of the source. In order to reduce the temperature deviation, the configuration of the rectangular ends of the crucible was modified to the circular type. In consequence, the uniform temperature is maintained in the range of about 90 percent length of the source. It is expected that the present methods and results on the temperature analysis can be very useful to manufacture the vapor deposition device.

• 산업경영시스템학회지
• /
• 제23권60호
• /
• pp.1-9
• /
• 2000

This paper deals with the difference between human sensibility collected from real product and that through graphic image(photographs and graphic images on CRT monitor) on the same automotive interior. The objective of this study is to verify the possibility that, If there are some restrictions in collecting human sensibility through real product directly, they can be overcome by using graphic image instead, making it easy to collect and analyze human sensibility so as to reflect consumers sensibility in the design of automotive interior, and also comparing the result between real product and graphic image on CRT monitor in order to confirm the potentiality of developing a remote human sensibility survey system through Internet. Therefore two experiments were conducted and the object for experiments was limited to automotive interior. The analysis results showed that there were significant differences between graphic image and real product in case of total interior and IPC(Instrument Panel Center) and no significant difference in case of display panel. Also, there were no significant difference when the subject group was female(housewife). To conclude, we can infer, in case of display panel, that it is possible to replace real product with graphic image to extract similar results on human sensibility and to collect human sensibility through Internet.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.140-145
• /
• 2001

The tape carrier package(TCD) is one of the most important components in a liquid crystal display(LCD) module. It has a role to transmit electrical signals from a printed circular board(PCB) to a display panel. If TCP is damaged under mechanical shock, the signals can not be transmitted to the panel and as a result, some dead lines are generated on the panel. This kind of phenomenon is commonly called as 'line defects'. In this paper, new structural design concepts of TCP are proposed to guarantee its reliability by using Taguchi's approach and dynamic FE-analysis. The line defects problem of TCP module is solved by replacing the original TCP with the newly designed one.

• 한국레이저가공학회지
• /
• 제17권1호
• /
• pp.17-21
• /
• 2014

Head up display is in increasing demand for advanced devices in the modern luxury vehicles. It helps drivers focus on driving environment on the road. While HUD technology with LED has advanced, the brightness in daylight can be still an issue to be resolved. Laser light source is a possible solution to overcome the brightness problem and optimal optics design is required for the best performance. Sample design of optics is proposed and detail procedure of lens design evaluation is presented in this paper. The results were characterized by using a ray tracing method and qualitative analysis for spot and DEE is also presented. The overall error or image distortion remained in the target range of $25{\mu}m$ and the simulated image demonstrated possible use in the automotive applications.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.33-38
• /
• 2012

The wafer positioning robot in the semiconductor industry is required to operate at high speed for the improvement of productivity. The residual vibration caused by the high speed of the wafer positioning robot, however, makes the life of the robot shorter and the cycle time longer. In this study, the input shaping and the path of the system are designed for the reduction of the residual vibration and the improvement of the cycle time. The followings are the process for the reduction and the improvement; 1) System modeling of the wafer positioning robot, 2) Verification of dynamic characteristics of the wafer positioning robot, 3) Input shaping plan using impulse response reiteration, 4) Simulation test using SIMULINK program, 5) Analysis of result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2769-2771
• /
• 2003

New high technology has been developing rapidly in telecommunication. That wanted to need a display which economical and useful color STN is satisfactory advantages for this condition, and it can control easy better than TFT, organic electroluminescence. But color STN has restriction on real time. Thus, in this paper, we want to control color STN with frequency transform method on converter.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.11-16
• /
• 2010

The performance of an OLED fabrication system strongly depends on the design of the evaporation cell-source. Therefore, necessity of the preceding study for cell source development of new concept is becoming increase. A development plan to substitute for experiment is applied as use simulation. In this study interpret behavior of a particle through DSMC techniques, and in this paper presenting a form to make so as to have better performance of the pointtype cell source which had a nozzle.

• 한국지능시스템학회논문지
• /
• 제20권3호
• /
• pp.400-405
• /
• 2010

본 논문은 차량 안전시스템을 위한 지능형 HUD 시스템의 특성을 고찰하였다. HUD 시스템은 차량에서 향상된 운전자 정보전달과 새로운 지능형 교통시스템을 제공한다. 자동차의 속도, 거리표시, 엔진 RPM, 내비게이션, 엔진 온도, 연료 게이지, 방향지시등, 경고 표시등에 대한 기본적인 정보를 운전자에게 전달한다. 본 논문에서 설계한 지능형 HUD 시스템은 TFT LCD, LCD 백라이트 LED, 평면 미러, 특수 제작된 렌즈 및 구동회로로 구성되었다. 본 논문은 운전자 안전성을 고려한 차량용 지능형 HUD 시스템을 제작, 분석하였다.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.29-34
• /
• 2006

In order to design an OLED(Organic Luminescent Emitting Device) evaporation system, geometric simulation of film thickness distribution profile is required. For the OLED evaporation process, thin film thickness uniformity is of great practical importance. In this paper, a geometric modeling algorithm is introduced for process simulation of the OLED evaporating process. The physical fact of the evaporating process is modeled mathematically. Based on the developed method, the thickness of the thin-film layer can be successfully controlled.