• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.16-23
• /
• 2001

Spray dispersion in high pressure diesel engines have been simulated experimentally with a special emphasis on the effect of swirl by using a liquid injection technique. A constant volume chamber was designed to be rotatable in order to generate a continuous swirl and to have the flow field closely resembling a solid body rotation. Emulsified fuel was injected into the chamber and the developing process of fuel sprays was visualized. The effect of swirl on the spray dispersion was quantified by calculating non-dimensionalized dispersion area according to the spray tip penetration length. The results show that the effect of swirl on the spray dispersion is different between short and long spray penetrations. For short range of spray tip penetration, the effect of swirl on spray dispersion is quite small. However, as the spray tip is penetrated into longer distance in spray chamber, the effect of swirl on spray dispersion becomes larger. These results can be used as a basic data for designing combustion chamber and injection system of direct injection diesel engine.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.176-184
• /
• 2001

The VDC(Vehicle Dynamics Control) is a control system whose target is to improve vehicle stability under critical motion. The system has a good potential of becoming a standard active safety unit in passenger vehicles since it can be implemented on top of the ABS/TCS system with little extra cost. This, however, is possible only when the signals that the VDC system demands can be obtained with sufficient accuracy. In this research, estimators for the road friction coefficient and body sideslip angle have been designed. The two variables have great influence upon performance of the VDC system but not directly measurable. For the estimator design, the Newton method and the nonlinear observer theory have been exploited. The performance of the estimator have been verified via simulations on critical driving conditions.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.54-61
• /
• 1984

Numerical calculation of the flow field past a passenger car was carried out by using a panel method with a small computer of 5Mbyte memory size. The shape of car body was simplified and reconstructed by 2180 panels on which a constant strength sink (or source) was distributed. The separation of flow from the surface and the wake flow were not considered in the calculation because of the computer memory limitation. All of the results of calculation were presented by using a 3-dimensional computer graphics. In spite of small memory size of computer, generally good agreements were obtained, except the separated region, from the comparison of pressure distribution between numerical analysis and wind tunnel experiment with 1/5 scaled model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.185-191
• /
• 2001

In many papers, the powertrain system generally has been madeled as one-dimensional torque model. One-dimensional powertrain model may calculate the torque correctly but it does not consider the non-rotational degrees-of-freedom of the powertrain components and the interaction of these degrees-of-freedom with the vehicle body frame and suspension. To consider the non-rotational degrees of freedom, the differential is modeled as a three-dimensional rigid body in this paper. A constant velocity joint is newly formulated and a relative constraint is also formulated to model the motion transfer due to gear ratio of the differential. Implementing the proposed powertrain system in the multibody model, more detail dynamic responses can be obtained. Obtained outputs such as reaction torques on the constant velocity joint and reaction forces on the rack can be useful data in the design of a powertrain.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.4
• /
• pp.80-90
• /
• 1994

Basic constraint equations derived from orthogonality conditions between a pair of body-fixed vectors and a body-fixed vector or a vector between two bodies are reformulated by using relative coordinate kinematics between two adjacent reference frames. Arithmetic numbers of operations required to compute derivatives of the constraint equations are drastically reduced. A mixed formulation of relative and cartesian coordinates is developed to further simplify derivatives of the constraints. Advantages and disadvantages of the new formulation are discussed. Possible singularity problem of para llelism constraints is resolved by introducing an extra generalized coordinate. Kinematic analysis of a McPherson strut suspension system are carried out to illustrate use and efficiency of the new formulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.15-20
• /
• 2012

This study is to propose and develop an integrated dynamics control system to improve and enhance the lateral stability and handling performance. To achieve this target, we integrate an AFS and a 4WS systems with a fuzzy logic controller. The IDCS determines active additional steering angle of front wheel and controls the steering angle of rear wheel. The results show that the IDCS improves the lateral stability and controllability on dry asphalt and snow paved road when double lane change and step steering inputs are applied. Yaw rate of the IDCS vehicle tracks reference yaw rate very well and body slip angle is reduced about by 50%. Response time of the IDCS vehicle is also decreased.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.85-93
• /
• 2004

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. This need to use adaptive design in initial design stage to gain economy through interchangeability between many kinds of components. This study performs the topology optimization by the concept of homogenization based on optimality criteria method which is efficient for the problem with a number of boundary condition and design variable. Therefore this provides the method to determine the optimum position and the shape of circular hole in the cross beam and then can achieve the weight minimization of electric vehicle body.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.58-64
• /
• 2005

An infinite element for impact problem has been developed using ABAQUS/Standard UEL. 4-node plane strain element was considered, and the constitutive equation was derived from properties of propagation plane body waves. The element acts as unbounded domain to the plane waves generated by impact. The numerical method was tested for the simulation of plate impact. The results show the effectiveness of the infinite element.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.119-129
• /
• 2000

In order to show the efficiency and accuracy of an expert drawbead model, finite element simulations of auto-body panel stampings are carried out. For numerical modeling of the drawbead of a panel die, the drawbead restraining force and bead-exit thinning calculated by the expert model are imposed to a node nearest to the drawbead position as a boundary condition, Finite element simulations show that the expert model provides the accurate solution, guarantees the stable convergence, and has the merit in the computation time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.17-26
• /
• 2007

In this paper, a theoretical approach is studied to predict structural performances and weight reduction rates of a car-body with shell type sections in case that its materials have to be substituted. For the material substitution design of a car-body, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilize some new indices derived from a structural performance point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of car-bodies.