• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2311-2316
• /
• 2009

Lately, in the automotive market appeared keywords such as convenience, safety in presentation and increase importance of pan of vehicle. Accordingly, the use of many electronic devices was required essentially and communication between electronic devices is being highlighted. Various devices such as controllers, sensors and multimedia device(audio, speakers, video, navigation) in-vehicle connected car network such as CAN, MOST. Modem in-vehicle network managed and operated as purpose of each other. In this Paper, intelligent car navigation considering convenience and safety implement on MOST Network and present system to control CAN Network in vehicle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.82-85
• /
• 2009

Lately, in the automotive market appeared keywords such as convenience, safety in presentation and increase importance of part of vehicle. Accordingly, the use of many electronic devices was required essentially and communication between electronic devices is being highlighted. Various devices such as controllers, sensors and multimedia device(audio, speakers, video, navigation) in-vehicle connected car network such as CAN, MOST. Modern in-vehicle network managed and operated as purpose of each other. In this Paper, intelligent car navigation considering convenience and safety implement on MOST Network and present system to control CAN Network in vehicle.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.479-495
• /
• 2018

This study was carried out to research the multimedia fate modeling, concentration distribution and impact assessment of polycyclic aromatic hydrocarbons (PAHs) emitted from automobiles, which are known as carcinogenic and mutation chemicals. The amount of emissions of PAHs was determined based on the census data of automobiles at a target S-city and emission factors of PAHs, where multimedia fugacity modeling was conducted by the restriction of PAHs transfer between air-soil at the impervious area. PAHs' Concentrations and their distributions at several environmental media were predicted by multimedia fugacity model (level III). The residual amounts and the distributions of PAHs through mass transfer of PAHs between environment media were used to assess the health risk of PAHs at unsteady state (level IV), where the sensitivity analyses of the model parameter of each variable were conducted based on Monte Carlo simulation. The experimental result at S-city showed that Fluoranthene among PAHs substances are the highest residual concentrations (60%, 53%, 32% and 34%) at all mediums (atmospheric, water, soil, sediment), respectively, where most of the PAHs were highly accumulated in the sediment media (more than 80%). A result of PAHs concentration changes in S-city over the past 34 years identified that PAHs emissions from all environmental media increased from 1983 to 2005 and decreased until 2016, where the emission of heavy-duty vehicle including truck revealed the largest contribution to the automotive emissions of PAHs at all environment media. The PAHs concentrations in soil and water for the last 34 years showed the less value than the legal standards of PAHs, but the PAHs in air exceeded the air quality standards from 1996 to 2016. The result of this study is expected to contribute the effective management and monitoring of toxic chemicals of PAHs at various environment media of Metropolitan city.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.37-46
• /
• 2014

Industrialization and urbanization have led automobiles to transform into more than just modes of transportation; they have become daily necessities as well as extensions of living spaces where a variety of activities can be done and automotive applications of the latest information technology are accelerated. Though material abundance has increased in the modern society, the conflicts and the stress emerging from a social structure focused on competition have increased as well. Such lifestyles generate a need for personal space and media content for healing the body and the mind. This research explores the automotive application of video content with the goal of refreshing the minds of the passengers. To this end, previous studies have investigated the emotional effect of videos, focusing on the responses of diverse groups of adults (age group of 20 to 60) who frequently used automobiles, which had video displays installed in them. The results showed that watching video contents on a full window inside a car influenced the creation of positive feelings7 and emotional satisfaction. The research attempts to study the methods of providing video contents and the effects of watching them that could aid the emotional well-being of passengers, and presents the possibility of emotional satisfaction created by a convergence of cars and multimedia contents in the future.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.427-435
• /
• 2017

Most of the domestic city buses are equipped with the pressure vessels subjected to internal pressure applied by compressed natural gas. Pressure vessels subjected to internal pressure are used in various forms and purposes. Fuel is explosive and has flammable high pressure. The damage of the pressure vessel causes many property damage and loss of life. Safe design for pressure vessel is always necessary. Due to these reasons, many studies using finite element analysis have been conducted. In this paper, the stresses of cylindrical vessel and spherical dome were analyzed using ANSYS, a finite element analysis software. In order to verify the validity of the analysis, a model with a perfectly spherical shape of the dome was designed and observed. Based on the ASME standard in used, stress distribution was also analyzed for models designed with compressed natural gas(CNG). The FEM analysis software agreed with the theory when the dome shape was perfectly spherical. The model designed based on the ASME specification theory, stress concentration occurred in the knuckle part.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.11
• /
• pp.447-455
• /
• 2017

At the modern industry, the composite material has been widely used. Particularly, the material of carbon fiber reinforced plastic hardened with resin on the basis of fiber is excellent. As the specific strength and rigidity are also superior, it receives attention as the light material. Among these materials, the carbon fiber reinforced plastic using carbon fiber has the superior mechanical property different from another fiber. So, it is utilized in vehicle and airplane at which high strength and light weight are needed at the same time. In this paper, the tensile property due to the fiber design is investigated through the analysis study with CT specimen composed of carbon plastic reinforced plastic. At the stress analysis of CFRP composite material with hole, the fracture trend at the tensile environment is examined. Also, it is shown that the lowest stress value happens and the deformation energy of the pre-crack becomes lowest at the analysis model composed of the stacking angle of 60° through the result due to the stacking angle. On the basis of this study result, it is thought to apply the foundation data to anticipate the fracture configuration at the structure applied with the practical experiment.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.11
• /
• pp.925-932
• /
• 2017

In this study, the analysis of plate under torsion was carried out according to stacking angle at the unidirectional carbon fiber reinforced plastic(UD CFRP) among composite materials. In case of UD CFRP, the material property due to stacking angle becomes different. Also, the stacking angles were designated to 15°, 30°, 45°, 60°, 75° and 90° at the study models. The notch hole was applied at the center part by supposing that rivet or hole was used. The analysis method was used by applying the experimental method at ISO 15310. Two jigs were fixed at the lower part and two jigs were descending at the upper part. As seen by the analysis result values at this study, the shear stress happening at the fracture part was seen with the lowest value in case of the stacking angle of 45°. It is known that the case of the stacking angle of 45°has the structural safety and durability higher than those of the other stacking angles when the torsion applies. It is thought that this result can be applied to the data of basis which can be devoted to the durability when the torsion is applied at CFRP plate.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.437-444
• /
• 2017

Stress concentrations around discontinuities, such as a hole in cross section of a structural member, have great importance because the most materials failure around the region may be occurred. Stress on the point applied by concentrated load reaches much larger value than the average stress in structural member. In this paper, stress analysis was performed for the plate with a partial through-hole to find the difference of the principal stress distribution. The difference between maximum principal stress and minimum principal stress in photoelasticity is equal to the value obtained by multiplying the isochromatic fringe order by the fringe constant of the material divided by the distance through which the light passes, that is, the thickness of the specimen. Since the difference of principal stress is proportional to the photoelastic fringe order, the distribution of the principal stress difference by the finite element analysis can be compared with the photoelasticity experimental result. ANSYS Workbench, that is the finite element software, is used to compute the differences of principal stresses at the specific points on the measured lines. The computation values obtained by ANSYS are compared with the experimental measurements by photoelasticity, and two results are comparable to each other. In addition, the stress concentration factor is obtained using the stress distribution analyzed from the variation of hole depth. Stress concentration factor is increasing, as the depth of hole increase.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.411-419
• /
• 2017

Stress concentration is one of the causes of the damage due to the large stress than the mean stress acting on the bar. This paper presents the results for stress of a stepped bar with a hole under torsional loading. The analysis for stress concentration and shearing stress was done by ANSYS Workbench which is a commercial finite element analysis software. The analysis results on fillet and hole are increased as the distance between them are become close. In addition, the distribution of the maximum equivalent stress developed in the fillet and hole in the outside range of the specific distance L (-100 mm ~ 300 mm) was almost constant in the models used in the analysis. On the other hand, the distribution of the maximum equivalent stress developed in the fillet and hole in the inside range of the specific distance L (-100 mm ~ 300 mm) was rapidly increasing and decreasing the change in the models used in the analysis. In addition, it was also possible to identify the location where the differences between equivalent stresses of hole and fillet occurred within a specific distance L (-100 mm ~ 300 mm). The analysis results of paper can used when selecting a hole location in a stepped bar under torsional loading.

• The Journal of the Korean dental association
• /
• v.48 no.9
• /
• pp.647-652
• /
• 2010

FDI World Dental Federation is organization representing more than one million dentists worldwide with its more than 100 years of long history. Now FDI headquarter is located in Geneve, Switzerland and serves for developing health policy and continuing education programs, speaking as a unified voice for dentistry in international advocacy and supporting member association in oral health promotion activities worldwide. Korean Dental Association has been a member of FDI since 1959 and participated actively in the FDI's worldwide activities. Past Dr. Heung-Ryul Yoon was a president of FDI from 2003 for 2 years and we also have an experience in 1997 of hosting FDI Annual World Dental Congress successively in Seoul. The image of a country reflects the country's culture as well as affects to its economical and social development and it decides the national brand toward the world. Currently, Korean people realized that and put their efforts for promoting diverse aspects of Korea to the world such as multimedia culture called Han-Ryu, electric industry, automotive industry, sports represented by soccer. We have advanced technique and skill in various fields and now it's time to show ourself better to the world. It's same to the dentistry. It's true that Korean dentistry is top-class in the world and the dental industry is prosperous and also has best technique in the world. I think and strongly hope that the 2013 FDI Seoul Annual World Dental Congress would be best opportunity for Korean dentistry and dental industry to promote ourselves and make a big step to the world. Not only for the dentistry, it will also be very good chance to all the Korean people to improve Korean national brand. I believe that we can accomplish if we, all dental societies, stand together and join our effort to use this good chance the best. I know we can make it.