• Review of KIISC
• /
• v.29 no.1
• /
• pp.34-37
• /
• 2019

지난 5년동안 전통적인 차량에 적용된 CAN 버스 상에서의 침입탐지시스템에 대한 연구가 활발히 진행되고 있다. 초기에 rule-base 로 탐지하거나, 단순한 경량 알고리즘을 통해 침입탐지를 하는 알고리즘이 주를 이루었다면, 최근에는 machine learning을 적용한 탐지 알고리즘들 역시 많이 개발되고 있다. CAN 용 침입탐지시스템이 그간 학계에서 주로 연구가 이루어 졌었다면 2019년 이후에는 상용차량들에 침입탐지시스템을 실제 탑재하여 출시될 예정에 있기 때문에, 이제는 산업계 주도적인 개발과 적용이 이루어질 것으로 보여진다. 다만, CAN 버스의 설계 구조상 공격 노드를 특정하기 어렵다는 한계와 전송량 대역폭의 제한으로 인해 기술적인 한계가 있어 왔기 때문에, 최근에는 IP 체계가 적용되고 automotive ethernet 기반으로 차량 네트워크가 빠르게 적용될 예정에 있다. 이에, 본 기고문에서는 automotive ethernet 의 보안기술에 대해 살펴보고, automotive ethernet 상에서 침입탐지시스템을 개발하기 위해 필요한 사항들은 어떤 것들이 있을지 살펴보고자 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.61-70
• /
• 2017

In this paper, an Ethernet equalizer that compensates for automotive temperature variations within a broad range is presented. Communications in automotive systems have become increasingly important because of the many electronics in vehicles. Ethernet protocols are a good candidate for automotive communications. However, they should satisfy the AEC-Q100 requirements that stipulate an operational temperature range from -40 to $150^{\circ}C$. This paper proposes an Ethernet equalizer that can recover data up until 100 m length of CAT-5 cable adaptively within a temperature range of -40 to $150^{\circ}C$. To support the wide temperature range, a feedback system is used. The proposed equalizer has a bandwidth of 31.25 MHz with a fully-differential structure and is implemented in a Hynix $0.13{\mu}m$ BCDMOS technology.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.313-318
• /
• 2014

Recently, Ethernet-based Diagnostic Over Internet Protocol (DoIP) was applied to automotive systems, and in-vehicle gateways have been introduced to integrate Ethernet with traditional in-vehicle networks, such as the local interconnect network (LIN), controller area network (CAN) and FlexRay. The introduction of in-vehicle gateways and of Ethernet based diagnostic protocols not only decreases the complexity of the networks, but also reduces the update time for ECU software reprogramming while enabling the use of a range of services, including remote diagnostics. In this paper, a diagnostic gateway was implement for an automotive system, and the performance measurements are presented. In addition, a range of applications provided by the diagnostic gateway are proposed.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.76-85
• /
• 2018

In recent years, automobiles have evolved from simple transportation to convergence devices, and have combined the Internet of things, high-speed communications, and artificial intelligence technologies to provide people with social and cultural benefits. To provide services such as a smart traffic analysis, autonomous driving, and unmanned driving, automobiles applying these technologies are required to perform various types of sensing and image analyses for vehicle recognition and distance measurements. addition, there has been a rapid increase in the need to introduce an automotive Ethernet, that can provide a wide bandwidth to support. such technologies. In this article, we survey the latest trends in automotive Ethernet based automobiles and their security threats, and analyze the status and prospects of security technologies applied to cope with them.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.127-132
• /
• 2019

This paper presents an overview of automotive communication technologies, including related technology developments. We describe the latency of Audio Video Bridge (AVB) network as well as purpose the optimized design of the Ethernet network system for automotive. Our design plays a significant role in reducing the delay between components. The proposed approach on realistic test cases showed that there was a delay reduction, approximately 49.4%. It is expected that the optimization method for the actual automotive environment can greatly shorten the time period in the design and development process. The results obtained from the experiments on the delay time present in each function are reliable because average values are obtained through repeated actual tests for several months. It will greatly benefit the industry since analyzing the latency between each function in a short period of time is very important.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.3025-3047
• /
• 2021

This paper presents the latest Ethernet standardization of in-vehicle network and the future trends of automotive Ethernet technology. The proposed system provides design and optimization algorithms for automotive networking technology related to AVB (Audio Video Bridge) technology. We present a design of in-vehicle network system as well as the optimization of AVB for automotive. A proposal of Reduced Latency of Machine to Machine (RLMM) plays an outstanding role in reducing the latency among devices. RLMM's approach to real-world experimental cases indicates a reduction in latency of around 41.2%. The setup optimized for the automotive network environment is expected to significantly reduce the time in the development and design process. The results obtained in the study of image transmission latency are trustworthy because average values were collected over a long period of time. It is necessary to analyze a latency between multimedia devices within limited time which will be of considerable benefit to the industry. Furthermore, the proposed reliable camera and video streaming through optimized AVB device settings would provide a high level of support in the real-time comprehension and analysis of images with AI (Artificial Intelligence) algorithms in autonomous driving.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.43-50
• /
• 2016

In this paper, we propose the protocol of Ethernet that will receive a popular interesting in the automotive intelligent network, it also attempts to implementation and verification through simulation and experiments to propose a fault tolerance algorithm when the data transfer on it. It has proven the usefulness of the system in order to apply toward an existing automotive communication system. In the case of actual real-time data for automotive industry, we generated a randomly-generated data which is the set of payload into a standard format to complete the experiment. Among the implemented existing algorithms performance, we confirmed the effectiveness of all range from a single data to mixed (Hybrid-type) data, to verify the proposed algorithm.

• Journal of computational fluids engineering
• /
• v.19 no.2
• /
• pp.24-29
• /
• 2014

In this study, a parallel performance of CUPID-code has been investigated for both Ethernet and Infiniband network system to examine the effect of cache memory and network-speed. Bi-conjugate gradient solver of CUPID-code has been parallelised by using domain decomposition method and message passing interface (MPI). It is shown that the parallel performance of Ethernet-network system is worse than that of Infiniband-network system due to the slow network-speed and a small cache memory. It is also found that the parallel performance of each system deteriorates for a small problem due to the communication overhead, but the performance of Infiniband-network system is better than Ethernet-network system due to a much faster network-speed. For a large problem, the parallel performance depends less on network system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.468-471
• /
• 2010

MOST150, which has a higher bandwidth than of MOST25, appears to satisfy the demand for the automotive infotainment system and to increase the multimedia processing capacity, and the various technology applications are required for the accomplishment of MOST150 development. The MOST25 network technology is being restrictively equipped with some of the car models but the problems with bandwidth and compatibility has arisen. In order to solve this, the MOST150 technology has been developed and further research is being carried out to apply the technology to the automobile industry. Thus, for the effective process of the Ethernet traffic in the realization of MOST150/Ethernet Gateway for automobile, we, in the research, shall analyse the Management Mapping method, including the MOST150's Isochronous channel, the MOST Ethernet Packet channel, and etc. and study the efficient algorithm.